The OCS Meta Operator

This is the primary operator for Red Hat OpenShift Container Storage (OCS). It is a "meta" operator, meaning it serves to facilitate the other operators in OCS by performing administrative tasks outside their scope as well as watching and configuring their CustomResources (CRs).

Build

OCS Operator

The operator is based on the Operator SDK. In order to build the operator, you first need to install the SDK. Instructions are here.

Once the SDK is installed, the operator can be built via:

$ dep ensure --vendor-only

$ make ocs-operator

Converged CSV

The converged CSV is created by sourcing manifests from each component-level operator to create a single unified CSV capable of deploying the component-level operators as well as the ocs-operator.

Building the unifed CSV is broken into two steps which are supported by the make source-manifests and make gen-release-csv make targets.

Step 1: Source in the component-level manifests from the component-level operator container images.

Set environment variables referencing the ROOK and NOOBAA container images to source the CSV/CRD data from. Then execute make source-manifests

$ export ROOK_IMAGE=<add rook image url here>
$ export NOOBAA_IMAGE=<add noobaa image url here>
$ make source-manifests

The above example will source manifests in from the supplied container images and store those manifests in build/_outdir/csv-templates/

Step 2: Generate the unified CSV by merging together all the manifests sourced in from step 1.

Set environment variables related to CSV versioning.

Also, set environment variables representing the container images that should be used in the deployments.

NOTE: Floating tags like 'master' and 'latest' should never be used in an official release.

$ export CSV_VERSION=0.0.2
$ export REPLACES_CSV_VERSION=0.0.1
$ export ROOK_IMAGE=<add rook image url here>
$ export NOOBAA_IMAGE=<add noobaa image url here>
$ export OCS_IMAGE=<add ocs operator image url here>
$ export ROOK_CSI_CEPH_IMAGE=<add image here>
$ export ROOK_CSI_REGISTRAR_IMAGE=<add image here>
$ export ROOK_CSI_PROVISIONER_IMAGE=<add image here>
$ export ROOK_CSI_SNAPSHOTTER_IMAGE=<add image here>
$ export ROOK_CSI_ATTACHER_IMAGE=<add image here>

$ make gen-release-csv

This example results in both a unified CSV along with all the corresponding CRDs being placed in deploy/olm-catalog/ocs-operator/0.0.2/ for release.

Run make ocs-registry to generate the registry bundle container image.

Prerequisites

OCS Operator will install its components only on nodes labelled for OCS with the key cluster.ocs.openshift.io/openshift-storage=''. To label the nodes from CLI,

$ oc label nodes <NodeName> cluster.ocs.openshift.io/openshift-storage=''

OCS requires at least 3 nodes labelled this way.

When creating StorageCluster from the UI, the create wizard takes care of labelling the selected nodes.

Dedicated nodes

In case dedicated storage nodes are available, these can also be tainted to allow only OCS components to be scheduled on them. Nodes need to be tainted with node.ocs.openshift.io/storage=true:NoSchedule which can done from the CLI as follows,

$ oc adm taint nodes <NodeNames> node.ocs.openshift.io/storage=true:NoSchedule

Note: The dedicated/tainted nodes will only run OCS components. The nodes will not run any apps. Therefore, if you taint, you need to have additional worker nodes that are untainted. If you don't, you will be unable to run any other apps in you Openshift cluster.

Note: Currently not all OCS components have the right tolerations set. So if you taint nodes and do not have additional untainted nodes, OCS will fail to deploy.

Install

The OCS operator can be installed into an OpenShift cluster using the OLM.

For quick install using pre-built container images, deploy the deploy-olm.yaml manifest.

$ oc create -f ./deploy/deploy-with-olm.yaml

This creates:

• a custom CatalogSource
• a new openshift-storage Namespace
• an OperatorGroup
• a Subcription to the OCS catalog in the openshift-storage namespace

You can check the status of the CSV using the following command:

$ oc get csv -n openshift-storage
NAME                  DISPLAY                                VERSION   REPLACES   PHASE
ocs-operator.v0.0.1   Openshift Container Storage Operator   0.0.1                Succeeded

This can take a few minutes. Once PHASE says Succeeded you can create a StorageCluster.

A StorageCluster resource can now be created from the console, using the StorageCluster creation wizard. From the CLI, a StorageCluster resource can be created using the example CR as follows,

$ oc create -f ./deploy/crds/ocs_v1alpha1_storagecluster_cr.yaml

Installation of development builds

To install own development builds of OCS, first build and push the ocs-operator image to your own image repository.

$ export REGISTRY_NAMESPACE=<quay-username>
$ export IMAGE_TAG=<some-tag>
$ make ocs-operator
$ podman push quay.io/$REGISTRY_NAMESPACE/ocs-operator:$IMAGE_TAG

Once the ocs-operator image is pushed, edit the CSV to point to the new image.

$ OCS_OPERATOR_IMAGE="quay.io/$REGISTRY_NAMESPACE/ocs-operator:$IMAGE_TAG"
$ sed -i "s|quay.io/ocs-dev/ocs-operator:latest|$OCS_OPERATOR_IMAGE" ./deploy/olm-catalog/ocs-operator/0.0.1/ocs-operator.v0.0.1.clusterserviceversion.yaml

Then build and upload the catalog registry image.

$ export REGISTRY_NAMESPACE=<quay-username>
$ export IMAGE_TAG=<some-tag>
$ make ocs-registry
$ podman push quay.io/$REGISTRY_NAMESPACE/ocs-registry:$IMAGE_TAG

Next create the namespace for OCS and create an OperatorGroup for OCS

$ oc create ns openshift-storage

$ cat <<EOF | oc create -f -
apiVersion: operators.coreos.com/v1alpha2
kind: OperatorGroup
metadata:
  name: openshift-storage-operatorgroup
  namespace: openshift-storage
EOF

Next add a new CatalogSource using the newly built and pushed registry image.

$ cat <<EOF | oc create -f -
apiVersion: operators.coreos.com/v1alpha1
kind: CatalogSource
metadata:
  name: ocs-catalogsource
  namespace: openshift-marketplace
spec:
  sourceType: grpc
  image: quay.io/$REGISTRY_NAMESPACE/ocs-registry:$IMAGE_TAG
  displayName: OpenShift Container Storage
  publisher: Red Hat
EOF

Finally subscribe to the OCS catalog.

$ cat <<EOF | oc create -f -
apiVersion: operators.coreos.com/v1alpha1
kind: Subscription
metadata:
  name: ocs-subscription
  namespace: openshift-storage
spec:
  channel: alpha
  name: ocs-operator
  source: ocs-catalogsource
  sourceNamespace: openshift-marketplace
EOF

Initial Data

When the operator starts, it will create a single OCSInitialization resource. That will cause various initial data to be created, including default StorageClasses.

The OCSInitialization resource is a singleton. If the operator sees one that it did not create, it will write an error message to its status explaining that it is being ignored.

Modifying Initial Data

You may modify or delete any of the operator's initial data. To reset and restore that data to its initial state, delete the OCSInitialization resource. It will be recreated, and all associated resources will be either recreated or restored to their original state.

Functional Tests

Our functional test suite uses the ginkgo testing framework.

Prerequisites for running Functional Tests

• ocs must already be installed
• KUBECONFIG env var must be set

Running functional test

make functest

Below is some sample output of what to expect.

Building functional tests
hack/build-functest.sh
GINKO binary found at /home/dvossel/go/bin/ginkgo
Compiling functests...
    compiled functests.test
Running functional test suite
hack/functest.sh
Running Functional Test Suite
Running Suite: Tests Suite
==========================
Random Seed: 1568299067
Will run 1 of 1 specs

•
Ran 1 of 1 Specs in 7.961 seconds
SUCCESS! -- 1 Passed | 0 Failed | 0 Pending | 0 Skipped
PASS

Functional test phases

There are 3 phases to the functional tests to be aware of.

1. BeforeSuite: At this step, the StorageCluster object is created and the test blocks waiting for the StorageCluster to come online.

2. Test Execution: Every written test can assume at this point that a StorageCluster is online and PVC actions should succeed.

3. AfterSuite: This is where test artifact cleanup occurs. Right now all tests should execute in the ocs-test namespace in order for artifacts to be cleaned up properly.

NOTE: The StorageCluster created in the BeforeSuite phase is not cleaned up. If you run the functional testsuite multiple times, BeforeSuite will simply fast succeed by detecting the StorageCluster already exists.

Developing Functional Tests

All the functional test code lives in the functests/ directory. For an example of how a functional test is structured, look at the functests/pvc_creation_test.go file.

The tests themselves should invoke simple to understand steps. Put any complex logic into separate helper files in the functests/ directory so test flows are easy to follow.

Running a single test When developing a test, it's common to just want to run a single functional test rather than the whole suite. This can be done using ginkgo's "focus" feature.

All you have to do is put a F in front of the tests declaration to force only that test to run. So, if you have an iteration like It("some test") defined, you just need to set that to FIt("some test") to force the test suite to only execute that single test.

Make sure to remove the focus from your test before creating the pull request. Otherwise the test suite will fail in CI.

Debugging Functional Test Failures

If an e2e test fails, you have access to two sets of data to help debug why the error occurred.

Functional test stdout log

This will tell you what test failed and it also outputs some debug information pertaining to the test cluster's state after the test suite exits. In prow you can find this log by clicking on the details link to the right of the ci/prow/ocs-operator-e2e-aws test entry on your PR. From there you can click the Raw build-log.txt link to view the full log.

PROW artifacts

In addition to the raw test stdout, each e2e test result has a set of artifacts associated with it that you can view using prow. These artifacts let you retroactively view information about the test cluster even after the e2e job has completed.

To browse through the e2e test cluster artifacts, click on the details link to the right of the ci/prow/ocs-operator-e2e-aws test entry on your PR. From there look at the top right hand corner for the artifacts link. That will bring you to a directory tree. Follow the artifacts/ directory to the ocs-operator-e2e-aws/ directory. There you can find logs and information pertaining to ever object in the cluster.

Downstream ocs-ci tests

In addition to the functest/* in the ocs-operator source tree we also have the ability to run the tests developed in the red-hat-storage/ocs-ci repo.

NOTE: Running this test suite requires python3.

To execute the ocs-ci test suite against an already installed ocs-operator, run make red-hat-storage-ocs-ci. This will download the ocs-ci repo and execute a subset of tests against the ocs-operator deployment.

In order to update either the ocs-ci version or subset of tests executed from ocs-ci, you'll need to modify the environment variables in hack/common.sh with the REDHAT_OCS_CI prefix.

Ginkgo tests vs ocs-ci tests

We currently have two functional test suites. The ginkgo functests test suite lives in this repo, and there is also an external one called ocs-ci.

The ginkgo functests test suite in this repo is for developers. As new functionality is introduced into the ocs-operator, this repo allows developers to prove their functionality works by including tests within their PR. This is the test suite where we exercise ocs-operator deployment/update/uninstall as well as some basic workload functionality like creating PVCs.

The external ocs-ci test suite is maintained by Red Hat QE. We execute this test suite against our PRs as another layer of verification in order to catch rook/ceph regressions as early as possible.