Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/ker…

…nel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2017-06-14 Here's another batch of Bluetooth patches for the 4.13 kernel: - Fix for Broadcom controllers not supporting Event Mask Page 2 - New QCA ROME USB ID for btusb - Fix for Security Manager Protocol to use constant-time memcmp - Improved support for TI WiLink chips Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <[email protected]>
niw · Jun 14, 2017 · 4cbf87c · 4cbf87c
2 parents 0331402 + 06e41d8
commit 4cbf87c
Show file tree

Hide file tree

Showing 9 changed files with 122 additions and 26 deletions.
diff --git a/Documentation/devicetree/bindings/net/ti,wilink-st.txt b/Documentation/devicetree/bindings/net/ti,wilink-st.txt
@@ -14,6 +14,12 @@ Required properties:
  - compatible: should be one of the following:
     "ti,wl1271-st"
     "ti,wl1273-st"
+    "ti,wl1281-st"
+    "ti,wl1283-st"
+    "ti,wl1285-st"
+    "ti,wl1801-st"
+    "ti,wl1805-st"
+    "ti,wl1807-st"
     "ti,wl1831-st"
     "ti,wl1835-st"
     "ti,wl1837-st"
@@ -22,6 +28,10 @@ Optional properties:
  - enable-gpios : GPIO signal controlling enabling of BT. Active high.
  - vio-supply : Vio input supply (1.8V)
  - vbat-supply : Vbat input supply (2.9-4.8V)
+ - clocks : Must contain an entry, for each entry in clock-names.
+   See ../clocks/clock-bindings.txt for details.
+ - clock-names : Must include the following entry:
+   "ext_clock" (External clock provided to the TI combo chip).
 
 Example:
 
@@ -31,5 +41,7 @@ Example:
 	bluetooth {
 		compatible = "ti,wl1835-st";
 		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		clocks = <&clk32k_wl18xx>;
+		clock-names = "ext_clock";
 	};
 };
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -141,6 +141,8 @@
 			bluetooth {
 				compatible = "ti,wl1835-st";
 				enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+				clocks = <&pmic>;
+				clock-names = "ext_clock";
 			};
 		};
 

diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
@@ -246,6 +246,27 @@ static struct sk_buff *btbcm_read_verbose_config(struct hci_dev *hdev)
 	return skb;
 }
 
+static struct sk_buff *btbcm_read_controller_features(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, 0xfc6e, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s: BCM: Read controller features failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return skb;
+	}
+
+	if (skb->len != 9) {
+		BT_ERR("%s: BCM: Controller features length mismatch",
+		       hdev->name);
+		kfree_skb(skb);
+		return ERR_PTR(-EIO);
+	}
+
+	return skb;
+}
+
 static struct sk_buff *btbcm_read_usb_product(struct hci_dev *hdev)
 {
 	struct sk_buff *skb;
@@ -417,6 +438,14 @@ int btbcm_setup_patchram(struct hci_dev *hdev)
 	BT_INFO("%s: BCM: chip id %u", hdev->name, skb->data[1]);
 	kfree_skb(skb);
 
+	/* Read Controller Features */
+	skb = btbcm_read_controller_features(hdev);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	BT_INFO("%s: BCM: features 0x%2.2x", hdev->name, skb->data[1]);
+	kfree_skb(skb);
+
 	/* Read Local Name */
 	skb = btbcm_read_local_name(hdev);
 	if (IS_ERR(skb))
@@ -540,6 +569,13 @@ int btbcm_setup_apple(struct hci_dev *hdev)
 		kfree_skb(skb);
 	}
 
+	/* Read Controller Features */
+	skb = btbcm_read_controller_features(hdev);
+	if (!IS_ERR(skb)) {
+		BT_INFO("%s: BCM: features 0x%2.2x", hdev->name, skb->data[1]);
+		kfree_skb(skb);
+	}
+
 	/* Read Local Name */
 	skb = btbcm_read_local_name(hdev);
 	if (!IS_ERR(skb)) {

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
@@ -266,6 +266,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0cf3, 0xe301), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x0489, 0xe092), .driver_info = BTUSB_QCA_ROME },
+	{ USB_DEVICE(0x0489, 0xe0a2), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x04ca, 0x3011), .driver_info = BTUSB_QCA_ROME },
 
 	/* Broadcom BCM2035 */

diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
@@ -762,8 +762,7 @@ static int bcm_acpi_probe(struct bcm_device *dev)
 	if (id)
 		gpio_mapping = (const struct acpi_gpio_mapping *) id->driver_data;
 
-	ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
-					gpio_mapping);
+	ret = devm_acpi_dev_add_driver_gpios(&pdev->dev, gpio_mapping);
 	if (ret)
 		return ret;
 
@@ -834,8 +833,6 @@ static int bcm_remove(struct platform_device *pdev)
 	list_del(&dev->list);
 	mutex_unlock(&bcm_device_lock);
 
-	acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pdev->dev));
-
 	dev_info(&pdev->dev, "%s device unregistered.\n", dev->name);
 
 	return 0;

diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c
@@ -1205,9 +1205,19 @@ static const struct dev_pm_ops intel_pm_ops = {
 	SET_RUNTIME_PM_OPS(intel_suspend_device, intel_resume_device, NULL)
 };
 
+static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
+static const struct acpi_gpio_params host_wake_gpios = { 1, 0, false };
+
+static const struct acpi_gpio_mapping acpi_hci_intel_gpios[] = {
+	{ "reset-gpios", &reset_gpios, 1 },
+	{ "host-wake-gpios", &host_wake_gpios, 1 },
+	{ },
+};
+
 static int intel_probe(struct platform_device *pdev)
 {
 	struct intel_device *idev;
+	int ret;
 
 	idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
 	if (!idev)
@@ -1217,6 +1227,10 @@ static int intel_probe(struct platform_device *pdev)
 
 	idev->pdev = pdev;
 
+	ret = devm_acpi_dev_add_driver_gpios(&pdev->dev, acpi_hci_intel_gpios);
+	if (ret)
+		dev_dbg(&pdev->dev, "Unable to add GPIO mapping table\n");
+
 	idev->reset = devm_gpiod_get(&pdev->dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(idev->reset)) {
 		dev_err(&pdev->dev, "Unable to retrieve gpio\n");

diff --git a/drivers/bluetooth/hci_ll.c b/drivers/bluetooth/hci_ll.c
@@ -48,6 +48,7 @@
 #include <linux/serdev.h>
 #include <linux/skbuff.h>
 #include <linux/ti_wilink_st.h>
+#include <linux/clk.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
@@ -84,6 +85,7 @@ struct ll_device {
 	struct hci_uart hu;
 	struct serdev_device *serdev;
 	struct gpio_desc *enable_gpio;
+	struct clk *ext_clk;
 };
 
 struct ll_struct {
@@ -146,8 +148,12 @@ static int ll_open(struct hci_uart *hu)
 
 	hu->priv = ll;
 
-	if (hu->serdev)
+	if (hu->serdev) {
+		struct ll_device *lldev = serdev_device_get_drvdata(hu->serdev);
 		serdev_device_open(hu->serdev);
+		if (!IS_ERR(lldev->ext_clk))
+			clk_prepare_enable(lldev->ext_clk);
+	}
 
 	return 0;
 }
@@ -181,6 +187,8 @@ static int ll_close(struct hci_uart *hu)
 		struct ll_device *lldev = serdev_device_get_drvdata(hu->serdev);
 		gpiod_set_value_cansleep(lldev->enable_gpio, 0);
 
+		clk_disable_unprepare(lldev->ext_clk);
+
 		serdev_device_close(hu->serdev);
 	}
 
@@ -721,6 +729,10 @@ static int hci_ti_probe(struct serdev_device *serdev)
 	if (IS_ERR(lldev->enable_gpio))
 		return PTR_ERR(lldev->enable_gpio);
 
+	lldev->ext_clk = devm_clk_get(&serdev->dev, "ext_clock");
+	if (IS_ERR(lldev->ext_clk) && PTR_ERR(lldev->ext_clk) != -ENOENT)
+		return PTR_ERR(lldev->ext_clk);
+
 	of_property_read_u32(serdev->dev.of_node, "max-speed", &max_speed);
 	hci_uart_set_speeds(hu, 115200, max_speed);
 
@@ -741,6 +753,14 @@ static void hci_ti_remove(struct serdev_device *serdev)
 }
 
 static const struct of_device_id hci_ti_of_match[] = {
+	{ .compatible = "ti,wl1271-st" },
+	{ .compatible = "ti,wl1273-st" },
+	{ .compatible = "ti,wl1281-st" },
+	{ .compatible = "ti,wl1283-st" },
+	{ .compatible = "ti,wl1285-st" },
+	{ .compatible = "ti,wl1801-st" },
+	{ .compatible = "ti,wl1805-st" },
+	{ .compatible = "ti,wl1807-st" },
 	{ .compatible = "ti,wl1831-st" },
 	{ .compatible = "ti,wl1835-st" },
 	{ .compatible = "ti,wl1837-st" },

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
@@ -548,6 +548,7 @@ static void hci_set_event_mask_page_2(struct hci_request *req)
 {
 	struct hci_dev *hdev = req->hdev;
 	u8 events[8] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+	bool changed = false;
 
 	/* If Connectionless Slave Broadcast master role is supported
 	 * enable all necessary events for it.
@@ -557,6 +558,7 @@ static void hci_set_event_mask_page_2(struct hci_request *req)
 		events[1] |= 0x80;	/* Synchronization Train Complete */
 		events[2] |= 0x10;	/* Slave Page Response Timeout */
 		events[2] |= 0x20;	/* CSB Channel Map Change */
+		changed = true;
 	}
 
 	/* If Connectionless Slave Broadcast slave role is supported
@@ -567,13 +569,24 @@ static void hci_set_event_mask_page_2(struct hci_request *req)
 		events[2] |= 0x02;	/* CSB Receive */
 		events[2] |= 0x04;	/* CSB Timeout */
 		events[2] |= 0x08;	/* Truncated Page Complete */
+		changed = true;
 	}
 
 	/* Enable Authenticated Payload Timeout Expired event if supported */
-	if (lmp_ping_capable(hdev) || hdev->le_features[0] & HCI_LE_PING)
+	if (lmp_ping_capable(hdev) || hdev->le_features[0] & HCI_LE_PING) {
 		events[2] |= 0x80;
+		changed = true;
+	}
 
-	hci_req_add(req, HCI_OP_SET_EVENT_MASK_PAGE_2, sizeof(events), events);
+	/* Some Broadcom based controllers indicate support for Set Event
+	 * Mask Page 2 command, but then actually do not support it. Since
+	 * the default value is all bits set to zero, the command is only
+	 * required if the event mask has to be changed. In case no change
+	 * to the event mask is needed, skip this command.
+	 */
+	if (changed)
+		hci_req_add(req, HCI_OP_SET_EVENT_MASK_PAGE_2,
+			    sizeof(events), events);
 }
 
 static int hci_init3_req(struct hci_request *req, unsigned long opt)