scsi: isci: Pass gfp_t flags in isci_port_bc_change_received()

Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.

libsas sas_notify_port_event() is called from
isci_port_bc_change_received(). Below is the context analysis for all of
its call chains:

host.c: sci_controller_error_handler(): atomic, irq handler     (*)
OR host.c: sci_controller_completion_handler(), atomic, tasklet (*)
  -> sci_controller_process_completions()
    -> sci_controller_event_completion()
      -> phy.c: sci_phy_event_handler()
        -> port.c: sci_port_broadcast_change_received()
          -> isci_port_bc_change_received()

host.c: isci_host_init()                                        (@)
spin_lock_irq(isci_host::scic_lock)
  -> sci_controller_initialize(), atomic                        (*)
    -> port_config.c: sci_port_configuration_agent_initialize()
      -> sci_mpc_agent_validate_phy_configuration()
        -> port.c: sci_port_add_phy()
          -> sci_port_set_phy()
            -> phy.c: sci_phy_set_port()
              -> port.c: sci_port_broadcast_change_received()
                -> isci_port_bc_change_received()

port_config.c: apc_agent_timeout(), atomic, timer callback      (*)
  -> sci_apc_agent_configure_ports()
    -> port.c: sci_port_add_phy()
      -> sci_port_set_phy()
        -> phy.c: sci_phy_set_port()
          -> port.c: sci_port_broadcast_change_received()
            -> isci_port_bc_change_received()

phy.c: enter SCI state: *SCI_PHY_STOPPED*                       # Cont. from [1]
  -> sci_phy_stopped_state_enter()
    -> host.c: sci_controller_link_down()
      -> ->link_down_handler()
      == port_config.c: sci_apc_agent_link_down()
        -> port.c: sci_port_remove_phy()
          -> sci_port_clear_phy()
            -> phy.c: sci_phy_set_port()
              -> port.c: sci_port_broadcast_change_received()
                -> isci_port_bc_change_received()

phy.c: enter SCI state: *SCI_PHY_STARTING*                      # Cont. from [2]
  -> sci_phy_starting_state_enter()
    -> host.c: sci_controller_link_down()
      -> ->link_down_handler()
      == port_config.c: sci_apc_agent_link_down()
        -> port.c: sci_port_remove_phy()
          -> sci_port_clear_phy()
            -> phy.c: sci_phy_set_port()
              -> port.c: sci_port_broadcast_change_received()
                -> isci_port_bc_change_received()

[1] Call chains for entering state: *SCI_PHY_STOPPED*
-----------------------------------------------------

host.c: isci_host_init()                                        (@)
spin_lock_irq(isci_host::scic_lock)
  -> sci_controller_initialize(), atomic                        (*)
      -> phy.c: sci_phy_initialize()
        -> phy.c: sci_phy_link_layer_initialization()
          -> phy.c: sci_change_state(SCI_PHY_STOPPED)

init.c: PCI ->remove() || PM_OPS ->suspend,  process context    (+)
  -> host.c: isci_host_deinit()
    -> sci_controller_stop_phys()
      -> phy.c: sci_phy_stop()
	-> sci_change_state(SCI_PHY_STOPPED)

phy.c: isci_phy_control()
spin_lock_irqsave(isci_host::scic_lock, )
  -> sci_phy_stop(), atomic                                     (*)
    -> sci_change_state(SCI_PHY_STOPPED)

[2] Call chains for entering state: *SCI_PHY_STARTING*
------------------------------------------------------

phy.c: phy_sata_timeout(), atimer, timer callback               (*)
spin_lock_irqsave(isci_host::scic_lock, )
  -> sci_change_state(SCI_PHY_STARTING)

host.c: phy_startup_timeout(), atomic, timer callback           (*)
spin_lock_irqsave(isci_host::scic_lock, )
  -> sci_controller_start_next_phy()
    -> sci_phy_start()
      -> sci_change_state(SCI_PHY_STARTING)

host.c: isci_host_start()                                       (@)
spin_lock_irq(isci_host::scic_lock)
  -> sci_controller_start(), atomic                             (*)
    -> sci_controller_start_next_phy()
      -> sci_phy_start()
        -> sci_change_state(SCI_PHY_STARTING)

phy.c: Enter SCI state *SCI_PHY_SUB_FINAL*                      # Cont. from [2A]
  -> sci_change_state(SCI_PHY_SUB_FINAL)
    -> sci_phy_starting_final_substate_enter()
      -> sci_change_state(SCI_PHY_READY)
        -> Enter SCI state: *SCI_PHY_READY*
          -> sci_phy_ready_state_enter()
            -> host.c: sci_controller_link_up()
              -> sci_controller_start_next_phy()
                -> sci_phy_start()
                  -> sci_change_state(SCI_PHY_STARTING)

phy.c: sci_phy_event_handler(), atomic, discussed earlier       (*)
  -> sci_change_state(SCI_PHY_STARTING), 11 instances

port.c: isci_port_perform_hard_reset()
spin_lock_irqsave(isci_host::scic_lock, )
  -> port.c: sci_port_hard_reset(), atomic                      (*)
    -> phy.c: sci_phy_reset()
      -> sci_change_state(SCI_PHY_RESETTING)
        -> enter SCI PHY state: *SCI_PHY_RESETTING*
          -> sci_phy_resetting_state_enter()
            -> sci_change_state(SCI_PHY_STARTING)

[2A] Call chains for entering SCI state: *SCI_PHY_SUB_FINAL*
------------------------------------------------------------

host.c: power_control_timeout(), atomic, timer callback         (*)
spin_lock_irqsave(isci_host::scic_lock, )
  -> phy.c: sci_phy_consume_power_handler()
    -> phy.c: sci_change_state(SCI_PHY_SUB_FINAL)

host.c: sci_controller_error_handler(): atomic, irq handler     (*)
OR host.c: sci_controller_completion_handler(), atomic, tasklet (*)
  -> sci_controller_process_completions()
    -> sci_controller_unsolicited_frame()
      -> phy.c: sci_phy_frame_handler()
        -> sci_change_state(SCI_PHY_SUB_AWAIT_SAS_POWER)
          -> sci_phy_starting_await_sas_power_substate_enter()
            -> host.c: sci_controller_power_control_queue_insert()
              -> phy.c: sci_phy_consume_power_handler()
                -> sci_change_state(SCI_PHY_SUB_FINAL)
        -> sci_change_state(SCI_PHY_SUB_FINAL)
    -> sci_controller_event_completion()
      -> phy.c: sci_phy_event_handler()
        -> sci_phy_start_sata_link_training()
          -> sci_change_state(SCI_PHY_SUB_AWAIT_SATA_POWER)
            -> sci_phy_starting_await_sata_power_substate_enter
              -> host.c: sci_controller_power_control_queue_insert()
                -> phy.c: sci_phy_consume_power_handler()
                  -> sci_change_state(SCI_PHY_SUB_FINAL)

As can be seen from the "(*)" markers above, almost all the call-chains are
atomic. The only exception, marked with "(+)", is a PCI ->remove() and
PM_OPS ->suspend() cold path. Thus, pass GFP_ATOMIC to the libsas port
event notifier.

Note, the now-replaced libsas APIs used in_interrupt() to implicitly decide
which memory allocation type to use.  This was only partially correct, as
it fails to choose the correct GFP flags when just preemption or interrupts
are disabled. Such buggy code paths are marked with "(@)" in the call
chains above.

Link: https://lore.kernel.org/r/[email protected]
Fixes: 1c393b9 ("scsi: libsas: Use dynamic alloced work to avoid sas event lost")
Cc: Artur Paszkiewicz <[email protected]>
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Ahmed S. Darwish <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

drivers/scsi/isci/port.c

@@ -164,7 +164,8 @@ static void isci_port_bc_change_received(struct isci_host *ihost,
 		"%s: isci_phy = %p, sas_phy = %p\n",
 		__func__, iphy, &iphy->sas_phy);
 
-	sas_notify_port_event(&iphy->sas_phy, PORTE_BROADCAST_RCVD);
+	sas_notify_port_event_gfp(&iphy->sas_phy,
+				  PORTE_BROADCAST_RCVD, GFP_ATOMIC);
 	sci_port_bcn_enable(iport);
 }