Merge tag 'mmc-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git…

…/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Allow synchronous detection of (e)MMC/SD/SDIO cards
   - Fixup error check for ioctls for SPI hosts
   - Disable broken SD-Cache support for Kingston Canvas Go Plus from 2019
   - Disable broken eMMC-Trim support for Kingston EMMC04G-M627
   - Disable broken eMMC-Trim support for Micron MTFC4GACAJCN-1M

  MMC host:
   - bcm2835: Convert DT bindings to YAML
   - mmci:
      - Enable asynchronous probe
      - Transform the ux500 HW-busy detection into a proper state machine
      - Add support for SW busy-end timeouts for the ux500 variants
   - mmci_stm32:
      - Add support for sdm32 variant revision v3.0 used on STM32MP25
      - Improve the tuning sequence
   - mtk-sd: Tune polling-period to improve performance
   - sdhci: Fixup DMA configuration for 64-bit DMA mode
   - sdhci-bcm-kona: Convert DT bindings to YAML
   - sdhci-msm:
      - Switch to use the new ICE API
      - Add support for the SC8280XP/IPQ6018/QDU1000/QRU1000 variants
   - sdhci-pci-gli:
      - Add support SD Express cards for GL9767
      - Add support for the Genesys Logic GL9767 variant"

* tag 'mmc-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (42 commits)
  dt-bindings: mmc: fsl-imx-esdhc: Add imx6ul support
  mmc: mmci: Add support for SW busy-end timeouts
  mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston Canvas Go Plus from 11/2019
  mmc: core: disable TRIM on Kingston EMMC04G-M627
  mmc: mmci: stm32: add delay block support for STM32MP25
  mmc: mmci: stm32: prepare other delay block support
  mmc: mmci: stm32: manage block gap hardware flow control
  mmc: mmci: Add support for sdmmc variant revision v3.0
  mmc: mmci: add stm32_idmabsize_align parameter
  dt-bindings: mmc: mmci: Add st,stm32mp25-sdmmc2 compatible
  mmc: core: disable TRIM on Micron MTFC4GACAJCN-1M
  mmc: mmci: Break out a helper function
  mmc: mmci: Use a switch statement machine
  mmc: mmci: Use state machine state as exit condition
  mmc: mmci: Retry the busy start condition
  mmc: mmci: Make busy complete state machine explicit
  mmc: mmci: Break out error check in busy detect
  mmc: mmci: Stash status while waiting for busy
  mmc: mmci: Unwind big if() clause
  mmc: mmci: Clear busy_status when starting command
  ...

Documentation/devicetree/bindings/mmc/arm,pl18x.yaml

@@ -53,10 +53,11 @@ properties:
         items:
           - const: arm,pl18x
           - const: arm,primecell
-      - description: Entry for STMicroelectronics variant of PL18x.
-          This dedicated compatible is used by bootloaders.
+      - description: Entries for STMicroelectronics variant of PL18x.
         items:
-          - const: st,stm32-sdmmc2
+          - enum:
+              - st,stm32-sdmmc2
+              - st,stm32mp25-sdmmc2
           - const: arm,pl18x
           - const: arm,primecell
 

Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml

@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/brcm,bcm2835-sdhost.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 SDHOST controller
+
+maintainers:
+  - Stefan Wahren <[email protected]>
+
+allOf:
+  - $ref: mmc-controller.yaml
+
+properties:
+  compatible:
+    const: brcm,bcm2835-sdhost
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+
+    sdhost: mmc@7e202000 {
+      compatible = "brcm,bcm2835-sdhost";
+      reg = <0x7e202000 0x100>;
+      interrupts = <2 24>;
+      clocks = <&clocks BCM2835_CLOCK_VPU>;
+      dmas = <&dma 13>;
+      dma-names = "rx-tx";
+      bus-width = <4>;
+    };

Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml

@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/brcm,kona-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family SDHCI controller
+
+maintainers:
+  - Florian Fainelli <[email protected]>
+
+allOf:
+  - $ref: sdhci-common.yaml#
+
+properties:
+  compatible:
+    const: brcm,kona-sdhci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/bcm281xx.h>
+
+    mmc@3f1a0000 {
+        compatible = "brcm,kona-sdhci";
+        reg = <0x3f1a0000 0x10000>;
+        clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO3>;
+        interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...

Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml

@@ -42,6 +42,7 @@ properties:
           - enum:
               - fsl,imx6sll-usdhc
               - fsl,imx6ull-usdhc
+              - fsl,imx6ul-usdhc
           - const: fsl,imx6sx-usdhc
       - items:
           - const: fsl,imx7d-usdhc

Documentation/devicetree/bindings/mmc/sdhci-msm.yaml

@@ -36,11 +36,14 @@ properties:
           - enum:
               - qcom,ipq5018-sdhci
               - qcom,ipq5332-sdhci
+              - qcom,ipq6018-sdhci
               - qcom,ipq9574-sdhci
               - qcom,qcm2290-sdhci
               - qcom,qcs404-sdhci
+              - qcom,qdu1000-sdhci
               - qcom,sc7180-sdhci
               - qcom,sc7280-sdhci
+              - qcom,sc8280xp-sdhci
               - qcom,sdm630-sdhci
               - qcom,sdm670-sdhci
               - qcom,sdm845-sdhci

drivers/memstick/host/r592.c

@@ -44,12 +44,10 @@ static const char *tpc_names[] = {
  * memstick_debug_get_tpc_name - debug helper that returns string for
  * a TPC number
  */
-const char *memstick_debug_get_tpc_name(int tpc)
+static __maybe_unused const char *memstick_debug_get_tpc_name(int tpc)
 {
 	return tpc_names[tpc-1];
 }
-EXPORT_SYMBOL(memstick_debug_get_tpc_name);
-
 
 /* Read a register*/
 static inline u32 r592_read_reg(struct r592_device *dev, int address)

drivers/mmc/core/block.c

@@ -178,6 +178,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 			       int recovery_mode,
 			       struct mmc_queue *mq);
 static void mmc_blk_hsq_req_done(struct mmc_request *mrq);
+static int mmc_spi_err_check(struct mmc_card *card);
 
 static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk)
 {
@@ -608,6 +609,11 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 	if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
 		return 0;
 
+	if (mmc_host_is_spi(card->host)) {
+		if (idata->ic.write_flag || r1b_resp || cmd.flags & MMC_RSP_SPI_BUSY)
+			return mmc_spi_err_check(card);
+		return err;
+	}
 	/* Ensure RPMB/R1B command has completed by polling with CMD13. */
 	if (idata->rpmb || r1b_resp)
 		err = mmc_poll_for_busy(card, busy_timeout_ms, false,
@@ -2505,9 +2511,9 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
 
 	string_get_size((u64)size, 512, STRING_UNITS_2,
 			cap_str, sizeof(cap_str));
-	pr_info("%s: %s %s %s %s\n",
+	pr_info("%s: %s %s %s%s\n",
 		md->disk->disk_name, mmc_card_id(card), mmc_card_name(card),
-		cap_str, md->read_only ? "(ro)" : "");
+		cap_str, md->read_only ? " (ro)" : "");
 
 	/* used in ->open, must be set before add_disk: */
 	if (area_type == MMC_BLK_DATA_AREA_MAIN)
@@ -2899,12 +2905,12 @@ static const struct file_operations mmc_dbg_ext_csd_fops = {
 	.llseek		= default_llseek,
 };
 
-static int mmc_blk_add_debugfs(struct mmc_card *card, struct mmc_blk_data *md)
+static void mmc_blk_add_debugfs(struct mmc_card *card, struct mmc_blk_data *md)
 {
 	struct dentry *root;
 
 	if (!card->debugfs_root)
-		return 0;
+		return;
 
 	root = card->debugfs_root;
 
@@ -2913,19 +2919,13 @@ static int mmc_blk_add_debugfs(struct mmc_card *card, struct mmc_blk_data *md)
 			debugfs_create_file_unsafe("status", 0400, root,
 						   card,
 						   &mmc_dbg_card_status_fops);
-		if (!md->status_dentry)
-			return -EIO;
 	}
 
 	if (mmc_card_mmc(card)) {
 		md->ext_csd_dentry =
 			debugfs_create_file("ext_csd", S_IRUSR, root, card,
 					    &mmc_dbg_ext_csd_fops);
-		if (!md->ext_csd_dentry)
-			return -EIO;
 	}
-
-	return 0;
 }
 
 static void mmc_blk_remove_debugfs(struct mmc_card *card,
@@ -2934,22 +2934,17 @@ static void mmc_blk_remove_debugfs(struct mmc_card *card,
 	if (!card->debugfs_root)
 		return;
 
-	if (!IS_ERR_OR_NULL(md->status_dentry)) {
-		debugfs_remove(md->status_dentry);
-		md->status_dentry = NULL;
-	}
+	debugfs_remove(md->status_dentry);
+	md->status_dentry = NULL;
 
-	if (!IS_ERR_OR_NULL(md->ext_csd_dentry)) {
-		debugfs_remove(md->ext_csd_dentry);
-		md->ext_csd_dentry = NULL;
-	}
+	debugfs_remove(md->ext_csd_dentry);
+	md->ext_csd_dentry = NULL;
 }
 
 #else
 
-static int mmc_blk_add_debugfs(struct mmc_card *card, struct mmc_blk_data *md)
+static void mmc_blk_add_debugfs(struct mmc_card *card, struct mmc_blk_data *md)
 {
-	return 0;
 }
 
 static void mmc_blk_remove_debugfs(struct mmc_card *card,

drivers/mmc/core/card.h

@@ -53,6 +53,10 @@ struct mmc_fixup {
 	unsigned int manfid;
 	unsigned short oemid;
 
+	/* Manufacturing date */
+	unsigned short year;
+	unsigned char month;
+
 	/* SDIO-specific fields. You can use SDIO_ANY_ID here of course */
 	u16 cis_vendor, cis_device;
 
@@ -68,6 +72,8 @@ struct mmc_fixup {
 
 #define CID_MANFID_ANY (-1u)
 #define CID_OEMID_ANY ((unsigned short) -1)
+#define CID_YEAR_ANY ((unsigned short) -1)
+#define CID_MONTH_ANY ((unsigned char) -1)
 #define CID_NAME_ANY (NULL)
 
 #define EXT_CSD_REV_ANY (-1u)
@@ -81,17 +87,21 @@ struct mmc_fixup {
 #define CID_MANFID_APACER       0x27
 #define CID_MANFID_KINGSTON     0x70
 #define CID_MANFID_HYNIX	0x90
+#define CID_MANFID_KINGSTON_SD	0x9F
 #define CID_MANFID_NUMONYX	0xFE
 
 #define END_FIXUP { NULL }
 
-#define _FIXUP_EXT(_name, _manfid, _oemid, _rev_start, _rev_end,	\
-		   _cis_vendor, _cis_device,				\
-		   _fixup, _data, _ext_csd_rev)				\
+#define _FIXUP_EXT(_name, _manfid, _oemid, _year, _month,	\
+		   _rev_start, _rev_end,			\
+		   _cis_vendor, _cis_device,			\
+		   _fixup, _data, _ext_csd_rev)			\
 	{						\
 		.name = (_name),			\
 		.manfid = (_manfid),			\
 		.oemid = (_oemid),			\
+		.year = (_year),			\
+		.month = (_month),			\
 		.rev_start = (_rev_start),		\
 		.rev_end = (_rev_end),			\
 		.cis_vendor = (_cis_vendor),		\
@@ -103,8 +113,8 @@ struct mmc_fixup {
 
 #define MMC_FIXUP_REV(_name, _manfid, _oemid, _rev_start, _rev_end,	\
 		      _fixup, _data, _ext_csd_rev)			\
-	_FIXUP_EXT(_name, _manfid,					\
-		   _oemid, _rev_start, _rev_end,			\
+	_FIXUP_EXT(_name, _manfid, _oemid, CID_YEAR_ANY, CID_MONTH_ANY,	\
+		   _rev_start, _rev_end,				\
 		   SDIO_ANY_ID, SDIO_ANY_ID,				\
 		   _fixup, _data, _ext_csd_rev)				\
 
@@ -118,8 +128,9 @@ struct mmc_fixup {
 		      _ext_csd_rev)
 
 #define SDIO_FIXUP(_vendor, _device, _fixup, _data)			\
-	_FIXUP_EXT(CID_NAME_ANY, CID_MANFID_ANY,			\
-		    CID_OEMID_ANY, 0, -1ull,				\
+	_FIXUP_EXT(CID_NAME_ANY, CID_MANFID_ANY, CID_OEMID_ANY,		\
+		   CID_YEAR_ANY, CID_MONTH_ANY,				\
+		   0, -1ull,						\
 		   _vendor, _device,					\
 		   _fixup, _data, EXT_CSD_REV_ANY)			\
 
@@ -264,4 +275,9 @@ static inline int mmc_card_broken_sd_discard(const struct mmc_card *c)
 	return c->quirks & MMC_QUIRK_BROKEN_SD_DISCARD;
 }
 
+static inline int mmc_card_broken_sd_cache(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_BROKEN_SD_CACHE;
+}
+
 #endif