Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/jikos/hid

Pull HID updates from Jiri Kosina:

 - quite a few firmware fixes for RMI driver by Andrew Duggan

 - huion and uclogic drivers have been substantially overlaping in
   functionality laterly.  This redundancy is fixed by hid-huion driver
   being merged into hid-uclogic; work done by Benjamin Tissoires and
   Nikolai Kondrashov

 - i2c-hid now supports ACPI GPIO interrupts; patch from Mika Westerberg

 - Some of the quirks, that got separated into individual drivers, have
   historically had EXPERT dependency.  As HID subsystem matured (as
   well as the individual drivers), this made less and less sense.  This
   dependency is now being removed by patch from Jean Delvare

 - Logitech lg4ff driver received a couple of improvements for mode
   switching, by Michal Malý

 - multitouch driver now supports clickpads, patches by Benjamin
   Tissoires and Seth Forshee

 - hid-sensor framework received a substantial update; namely support
   for Custom and Generic pages is being added; work done by Srinivas
   Pandruvada

 - wacom driver received substantial update; it now supports
   i2c-conntected devices (Mika Westerberg), Bamboo PADs are now
   properly supported (Benjamin Tissoires), much improved battery
   reporting (Jason Gerecke) and pen proximity cleanups (Ping Cheng)

 - small assorted fixes and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits)
  HID: sensor: Update document for custom sensor
  HID: sensor: Custom and Generic sensor support
  HID: debug: fix error handling in hid_debug_events_read()
  Input - mt: Fix input_mt_get_slot_by_key
  HID: logitech-hidpp: fix error return code
  HID: wacom: Add support for Cintiq 13HD Touch
  HID: logitech-hidpp: add a module parameter to keep firmware gestures
  HID: usbhid: yet another mouse with ALWAYS_POLL
  HID: usbhid: more mice with ALWAYS_POLL
  HID: wacom: set stylus_in_proximity before checking touch_down
  HID: wacom: use wacom_wac_finger_count_touches to set touch_down
  HID: wacom: remove hardcoded WACOM_QUIRK_MULTI_INPUT
  HID: pidff: effect can't be NULL
  HID: add quirk for PIXART OEM mouse used by HP
  HID: add HP OEM mouse to quirk ALWAYS_POLL
  HID: wacom: ask for a in-prox report when it was missed
  HID: hid-sensor-hub: Fix sparse warning
  HID: hid-sensor-hub: fix attribute read for logical usage id
  HID: plantronics: fix Kconfig default
  HID: pidff: support more than one concurrent effect
  ...

Documentation/ABI/testing/sysfs-driver-hid

@@ -8,3 +8,13 @@ Description:	When read, this file returns the device's raw binary HID
 		report descriptor.
 		This file cannot be written.
 Users:		HIDAPI library (http://www.signal11.us/oss/hidapi)
+
+What:		For USB devices	: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/country
+		For BT devices	: /sys/class/bluetooth/hci<addr>/<hid-bus>:<vendor-id>:<product-id>.<num>/country
+		Symlink		: /sys/class/hidraw/hidraw<num>/device/country
+Date:		February 2015
+KernelVersion:	3.19
+Contact:	Olivier Gay <[email protected]>
+Description:	When read, this file returns the hex integer value in ASCII
+		of the device's HID country code (e.g. 21 for US).
+		This file cannot be written.

Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff

@@ -5,3 +5,48 @@ Contact:	Michal Malý <[email protected]>
 Description:	Display minimum, maximum and current range of the steering
 		wheel. Writing a value within min and max boundaries sets the
 		range of the wheel.
+
+What:		/sys/bus/hid/drivers/logitech/<dev>/alternate_modes
+Date:		Feb 2015
+KernelVersion:	4.1
+Contact:	Michal Malý <[email protected]>
+Description:	Displays a set of alternate modes supported by a wheel. Each
+		mode is listed as follows:
+		  Tag: Mode Name
+		Currently active mode is marked with an asterisk. List also
+		contains an abstract item "native" which always denotes the
+		native mode of the wheel. Echoing the mode tag switches the
+		wheel into the corresponding mode. Depending on the exact model
+		of the wheel not all listed modes might always be selectable.
+		If a wheel cannot be switched into the desired mode, -EINVAL
+		is returned accompanied with an explanatory message in the
+		kernel log.
+		This entry is not created for devices that have only one mode.
+
+		Currently supported mode switches:
+		Driving Force Pro:
+		  DF-EX --> DFP
+
+		G25:
+		  DF-EX --> DFP --> G25
+
+		G27:
+		  DF-EX <*> DFP <-> G25 <-> G27
+		  DF-EX <*--------> G25 <-> G27
+		  DF-EX <*----------------> G27
+
+		DFGT:
+		  DF-EX <*> DFP <-> DFGT
+		  DF-EX <*--------> DFGT
+
+		* hid_logitech module must be loaded with lg4ff_no_autoswitch=1
+		  parameter set in order for the switch to DF-EX mode to work.
+
+What:		/sys/bus/hid/drivers/logitech/<dev>/real_id
+Date:		Feb 2015
+KernelVersion:	4.1
+Contact:	Michal Malý <[email protected]>
+Description:	Displays the real model of the wheel regardless of any
+		alternate mode the wheel might be switched to.
+		It is a read-only value.
+		This entry is not created for devices that have only one mode.

Documentation/hid/hid-sensor.txt

@@ -138,3 +138,87 @@ accelerometer wants to poll X axis value, then it can call this function with
 the usage id of X axis. HID sensors can provide events, so this is not necessary
 to poll for any field. If there is some new sample, the core driver will call
 registered callback function to process the sample.
+
+
+----------
+
+HID Custom and generic Sensors
+
+HID Sensor specification defines two special sensor usage types. Since they
+don't represent a standard sensor, it is not possible to define using Linux IIO
+type interfaces.
+The purpose of these sensors is to extend the functionality or provide a
+way to obfuscate the data being communicated by a sensor. Without knowing the
+mapping between the data and its encapsulated form, it is difficult for
+an application/driver to determine what data is being communicated by the sensor.
+This allows some differentiating use cases, where vendor can provide applications.
+Some common use cases are debug other sensors or to provide some events like
+keyboard attached/detached or lid open/close.
+
+To allow application to utilize these sensors, here they are exported uses sysfs
+attribute groups, attributes and misc device interface.
+
+An example of this representation on sysfs:
+/sys/devices/pci0000:00/INT33C2:00/i2c-0/i2c-INT33D1:00/0018:8086:09FA.0001/HID-SENSOR-2000e1.6.auto$ tree -R
+.
+????????? enable_sensor
+????????? feature-0-200316
+??????? ????????? feature-0-200316-maximum
+??????? ????????? feature-0-200316-minimum
+??????? ????????? feature-0-200316-name
+??????? ????????? feature-0-200316-size
+??????? ????????? feature-0-200316-unit-expo
+??????? ????????? feature-0-200316-units
+??????? ????????? feature-0-200316-value
+????????? feature-1-200201
+??????? ????????? feature-1-200201-maximum
+??????? ????????? feature-1-200201-minimum
+??????? ????????? feature-1-200201-name
+??????? ????????? feature-1-200201-size
+??????? ????????? feature-1-200201-unit-expo
+??????? ????????? feature-1-200201-units
+??????? ????????? feature-1-200201-value
+????????? input-0-200201
+??????? ????????? input-0-200201-maximum
+??????? ????????? input-0-200201-minimum
+??????? ????????? input-0-200201-name
+??????? ????????? input-0-200201-size
+??????? ????????? input-0-200201-unit-expo
+??????? ????????? input-0-200201-units
+??????? ????????? input-0-200201-value
+????????? input-1-200202
+??????? ????????? input-1-200202-maximum
+??????? ????????? input-1-200202-minimum
+??????? ????????? input-1-200202-name
+??????? ????????? input-1-200202-size
+??????? ????????? input-1-200202-unit-expo
+??????? ????????? input-1-200202-units
+??????? ????????? input-1-200202-value
+
+Here there is a custom sensors with four fields, two feature and two inputs.
+Each field is represented by a set of attributes. All fields except the "value"
+are read only. The value field is a RW field.
+Example
+/sys/bus/platform/devices/HID-SENSOR-2000e1.6.auto/feature-0-200316$ grep -r . *
+feature-0-200316-maximum:6
+feature-0-200316-minimum:0
+feature-0-200316-name:property-reporting-state
+feature-0-200316-size:1
+feature-0-200316-unit-expo:0
+feature-0-200316-units:25
+feature-0-200316-value:1
+
+How to enable such sensor?
+By default sensor can be power gated. To enable sysfs attribute "enable" can be
+used.
+$ echo 1 > enable_sensor
+
+Once enabled and powered on, sensor can report value using HID reports.
+These reports are pushed using misc device interface in a FIFO order.
+/dev$ tree | grep HID-SENSOR-2000e1.6.auto
+??????? ????????? 10:53 -> ../HID-SENSOR-2000e1.6.auto
+????????? HID-SENSOR-2000e1.6.auto
+
+Each reports can be of variable length preceded by a header. This header
+consist of a 32 bit usage id, 64 bit time stamp and 32 bit length field of raw
+data.

drivers/hid/Kconfig

@@ -92,7 +92,7 @@ menu "Special HID drivers"
 	depends on HID
 
 config HID_A4TECH
-	tristate "A4 tech mice" if EXPERT
+	tristate "A4 tech mice"
 	depends on HID
 	default !EXPERT
 	---help---
@@ -113,7 +113,7 @@ config HID_ACRUX_FF
 	game controllers.
 
 config HID_APPLE
-	tristate "Apple {i,Power,Mac}Books" if EXPERT
+	tristate "Apple {i,Power,Mac}Books"
 	depends on HID
 	default !EXPERT
 	---help---
@@ -141,7 +141,7 @@ config HID_AUREAL
 	Support for Aureal Cy se W-01RN Remote Controller and other Aureal derived remotes.
 
 config HID_BELKIN
-	tristate "Belkin Flip KVM and Wireless keyboard" if EXPERT
+	tristate "Belkin Flip KVM and Wireless keyboard"
 	depends on HID
 	default !EXPERT
 	---help---
@@ -158,14 +158,14 @@ config HID_BETOP_FF
 	 - BETOP 2185 PC & BFM MODE
 
 config HID_CHERRY
-	tristate "Cherry Cymotion keyboard" if EXPERT
+	tristate "Cherry Cymotion keyboard"
 	depends on HID
 	default !EXPERT
 	---help---
 	Support for Cherry Cymotion keyboard.
 
 config HID_CHICONY
-	tristate "Chicony Tactical pad" if EXPERT
+	tristate "Chicony Tactical pad"
 	depends on HID
 	default !EXPERT
 	---help---
@@ -196,7 +196,7 @@ config HID_CP2112
 	customizable USB descriptor fields are exposed as sysfs attributes.
 
 config HID_CYPRESS
-	tristate "Cypress mouse and barcode readers" if EXPERT
+	tristate "Cypress mouse and barcode readers"
 	depends on HID
 	default !EXPERT
 	---help---
@@ -245,7 +245,7 @@ config HID_ELO
 	different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO.
 
 config HID_EZKEY
-	tristate "Ezkey BTC 8193 keyboard" if EXPERT
+	tristate "Ezkey BTC 8193 keyboard"
 	depends on HID
 	default !EXPERT
 	---help---
@@ -286,12 +286,6 @@ config HID_GT683R
 	Currently the following devices are know to be supported:
 	  - MSI GT683R
 
-config HID_HUION
-	tristate "Huion tablets"
-	depends on USB_HID
-	---help---
-	Support for Huion 580 tablet.
-
 config HID_KEYTOUCH
 	tristate "Keytouch HID devices"
 	depends on HID
@@ -312,9 +306,9 @@ config HID_KYE
 
 config HID_UCLOGIC
 	tristate "UC-Logic"
-	depends on HID
+	depends on USB_HID
 	---help---
-	Support for UC-Logic tablets.
+	Support for UC-Logic and Huion tablets.
 
 config HID_WALTOP
 	tristate "Waltop"
@@ -344,7 +338,7 @@ config HID_TWINHAN
 	Support for Twinhan IR remote control.
 
 config HID_KENSINGTON
-	tristate "Kensington Slimblade Trackball" if EXPERT
+	tristate "Kensington Slimblade Trackball"
 	depends on HID
 	default !EXPERT
 	---help---
@@ -372,7 +366,7 @@ config HID_LENOVO
 	- ThinkPad Compact USB Keyboard with TrackPoint (supports Fn keys)
 
 config HID_LOGITECH
-	tristate "Logitech devices" if EXPERT
+	tristate "Logitech devices"
 	depends on HID
 	default !EXPERT
 	---help---
@@ -461,14 +455,14 @@ config HID_MAGICMOUSE
 	Apple Wireless "Magic" Mouse and the Apple Wireless "Magic" Trackpad.
 
 config HID_MICROSOFT
-	tristate "Microsoft non-fully HID-compliant devices" if EXPERT
+	tristate "Microsoft non-fully HID-compliant devices"
 	depends on HID
 	default !EXPERT
 	---help---
 	Support for Microsoft devices that are not fully compliant with HID standard.
 
 config HID_MONTEREY
-	tristate "Monterey Genius KB29E keyboard" if EXPERT
+	tristate "Monterey Genius KB29E keyboard"
 	depends on HID
 	default !EXPERT
 	---help---
@@ -638,7 +632,6 @@ config HID_PICOLCD_CIR
 
 config HID_PLANTRONICS
 	tristate "Plantronics USB HID Driver"
-	default !EXPERT
 	depends on HID
 	---help---
 	Provides HID support for Plantronics telephony devices.
@@ -885,6 +878,21 @@ config HID_SENSOR_HUB
 	  for events and handle data streams. Each sensor driver can format
 	  data and present to user mode using input or IIO interface.
 
+config HID_SENSOR_CUSTOM_SENSOR
+	tristate "HID Sensors hub custom sensor support"
+	depends on HID_SENSOR_HUB
+	default n
+	---help---
+	  HID Sensor hub specification allows definition of some custom and
+	  generic sensors. Unlike other HID sensors, they can't be exported
+	  via Linux IIO because of custom fields. This is up to the manufacturer
+	  to decide how to interpret these special sensor ids and process in
+	  the user space. Currently some manufacturers are using these ids for
+	  sensor calibration and debugging other sensors. Manufacturers
+	  should't use these special custom sensor ids to export any of the
+	  standard sensors.
+	  Select this config option for custom/generic sensor support.
+
 endmenu
 
 endif # HID

drivers/hid/Makefile

@@ -41,7 +41,6 @@ obj-$(CONFIG_HID_GYRATION)	+= hid-gyration.o
 obj-$(CONFIG_HID_HOLTEK)	+= hid-holtek-kbd.o
 obj-$(CONFIG_HID_HOLTEK)	+= hid-holtek-mouse.o
 obj-$(CONFIG_HID_HOLTEK)	+= hid-holtekff.o
-obj-$(CONFIG_HID_HUION)		+= hid-huion.o
 obj-$(CONFIG_HID_HYPERV_MOUSE)	+= hid-hyperv.o
 obj-$(CONFIG_HID_ICADE)		+= hid-icade.o
 obj-$(CONFIG_HID_KENSINGTON)	+= hid-kensington.o
@@ -101,6 +100,7 @@ obj-$(CONFIG_HID_WACOM)		+= wacom.o
 obj-$(CONFIG_HID_WALTOP)	+= hid-waltop.o
 obj-$(CONFIG_HID_WIIMOTE)	+= hid-wiimote.o
 obj-$(CONFIG_HID_SENSOR_HUB)	+= hid-sensor-hub.o
+obj-$(CONFIG_HID_SENSOR_CUSTOM_SENSOR)	+= hid-sensor-custom.o
 
 obj-$(CONFIG_USB_HID)		+= usbhid/
 obj-$(CONFIG_USB_MOUSE)		+= usbhid/

drivers/hid/hid-core.c

@@ -1562,12 +1562,26 @@ read_report_descriptor(struct file *filp, struct kobject *kobj,
 	return count;
 }
 
+static ssize_t
+show_country(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+
+	return sprintf(buf, "%02x\n", hdev->country & 0xff);
+}
+
 static struct bin_attribute dev_bin_attr_report_desc = {
 	.attr = { .name = "report_descriptor", .mode = 0444 },
 	.read = read_report_descriptor,
 	.size = HID_MAX_DESCRIPTOR_SIZE,
 };
 
+static struct device_attribute dev_attr_country = {
+	.attr = { .name = "country", .mode = 0444 },
+	.show = show_country,
+};
+
 int hid_connect(struct hid_device *hdev, unsigned int connect_mask)
 {
 	static const char *types[] = { "Device", "Pointer", "Mouse", "Device",
@@ -1646,6 +1660,11 @@ int hid_connect(struct hid_device *hdev, unsigned int connect_mask)
 		bus = "<UNKNOWN>";
 	}
 
+	ret = device_create_file(&hdev->dev, &dev_attr_country);
+	if (ret)
+		hid_warn(hdev,
+			 "can't create sysfs country code attribute err: %d\n", ret);
+
 	ret = device_create_bin_file(&hdev->dev, &dev_bin_attr_report_desc);
 	if (ret)
 		hid_warn(hdev,
@@ -1661,6 +1680,7 @@ EXPORT_SYMBOL_GPL(hid_connect);
 
 void hid_disconnect(struct hid_device *hdev)
 {
+	device_remove_file(&hdev->dev, &dev_attr_country);
 	device_remove_bin_file(&hdev->dev, &dev_bin_attr_report_desc);
 	if (hdev->claimed & HID_CLAIMED_INPUT)
 		hidinput_disconnect(hdev);
@@ -1824,6 +1844,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_MOUSEPEN_I608X) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_MOUSEPEN_I608X_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_PENSKETCH_M912) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LCPOWER, USB_DEVICE_ID_LCPOWER_LC1000 ) },
 #if IS_ENABLED(CONFIG_HID_LENOVO)

drivers/hid/hid-debug.c

@@ -165,6 +165,7 @@ static const struct hid_usage_entry hid_usage_table[] = {
     {0, 0x53, "DeviceIndex"},
     {0, 0x54, "ContactCount"},
     {0, 0x55, "ContactMaximumNumber"},
+    {0, 0x59, "ButtonType"},
     {0, 0x5A, "SecondaryBarrelSwitch"},
     {0, 0x5B, "TransducerSerialNumber"},
   { 15, 0, "PhysicalInterfaceDevice" },
@@ -1127,7 +1128,8 @@ static ssize_t hid_debug_events_read(struct file *file, char __user *buffer,
 
 				if (!list->hdev || !list->hdev->debug) {
 					ret = -EIO;
-					break;
+					set_current_state(TASK_RUNNING);
+					goto out;
 				}
 
 				/* allow O_NONBLOCK from other threads */