Merge tag 'parisc-for-6.1-2' of git://git.kernel.org/pub/scm/linux/ke…

…rnel/git/deller/parisc-linux

Pull parisc architecture fixes from Helge Deller:
 "This mostly handles oddities with the serial port 8250_gsc.c driver.

  Although the name suggests it's just for serial ports on the GSC bus
  (e.g. in older PA-RISC machines), it handles serial ports on PA-RISC
  PCI devices (e.g. on the SuperIO chip) as well.

  Thus this renames the driver to 8250_parisc and fixes the config
  dependencies.

  The other change is a cleanup on how the device IDs of devices in a
  PA-RISC machine are shown at startup"

* tag 'parisc-for-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Avoid printing the hardware path twice
  parisc: Export iosapic_serial_irq() symbol for serial port driver
  MAINTAINERS: adjust entry after renaming parisc serial driver
  parisc: Use signed char for hardware path in pdc.h
  parisc/serial: Rename 8250_gsc.c to 8250_parisc.c
  parisc: Make 8250_gsc driver dependend on CONFIG_PARISC

MAINTAINERS

@@ -15630,7 +15630,7 @@ F:	drivers/input/serio/gscps2.c
 F:	drivers/input/serio/hp_sdc*
 F:	drivers/parisc/
 F:	drivers/parport/parport_gsc.*
-F:	drivers/tty/serial/8250/8250_gsc.c
+F:	drivers/tty/serial/8250/8250_parisc.c
 F:	drivers/video/console/sti*
 F:	drivers/video/fbdev/sti*
 F:	drivers/video/logo/logo_parisc*

arch/parisc/include/asm/hardware.h

@@ -10,12 +10,12 @@
 #define SVERSION_ANY_ID		PA_SVERSION_ANY_ID
 
 struct hp_hardware {
-	unsigned short	hw_type:5;	/* HPHW_xxx */
-	unsigned short	hversion;
-	unsigned long	sversion:28;
-	unsigned short	opt;
-	const char	name[80];	/* The hardware description */
-};
+	unsigned int	hw_type:8;	/* HPHW_xxx */
+	unsigned int	hversion:12;
+	unsigned int	sversion:12;
+	unsigned char	opt;
+	unsigned char	name[59];	/* The hardware description */
+} __packed;
 
 struct parisc_device;
 

arch/parisc/include/uapi/asm/pdc.h

@@ -363,20 +363,25 @@
 
 #if !defined(__ASSEMBLY__)
 
-/* flags of the device_path */
+/* flags for hardware_path */
 #define	PF_AUTOBOOT	0x80
 #define	PF_AUTOSEARCH	0x40
 #define	PF_TIMER	0x0F
 
-struct device_path {		/* page 1-69 */
-	unsigned char flags;	/* flags see above! */
-	unsigned char bc[6];	/* bus converter routing info */
-	unsigned char mod;
-	unsigned int  layers[6];/* device-specific layer-info */
-} __attribute__((aligned(8))) ;
+struct hardware_path {
+	unsigned char flags;	/* see bit definitions below */
+	signed   char bc[6];	/* Bus Converter routing info to a specific */
+				/* I/O adaptor (< 0 means none, > 63 resvd) */
+	signed   char mod;	/* fixed field of specified module */
+};
+
+struct pdc_module_path {	/* page 1-69 */
+	struct hardware_path path;
+	unsigned int layers[6]; /* device-specific info (ctlr #, unit # ...) */
+} __attribute__((aligned(8)));
 
 struct pz_device {
-	struct	device_path dp;	/* see above */
+	struct pdc_module_path dp;	/* see above */
 	/* struct	iomod *hpa; */
 	unsigned int hpa;	/* HPA base address */
 	/* char	*spa; */
@@ -611,21 +616,6 @@ struct pdc_initiator { /* PDC_INITIATOR */
 	int mode;
 };
 
-struct hardware_path {
-	char  flags;	/* see bit definitions below */
-	char  bc[6];	/* Bus Converter routing info to a specific */
-			/* I/O adaptor (< 0 means none, > 63 resvd) */
-	char  mod;	/* fixed field of specified module */
-};
-
-/*
- * Device path specifications used by PDC.
- */
-struct pdc_module_path {
-	struct hardware_path path;
-	unsigned int layers[6]; /* device-specific info (ctlr #, unit # ...) */
-};
-
 /* Only used on some pre-PA2.0 boxes */
 struct pdc_memory_map {		/* PDC_MEMORY_MAP */
 	unsigned long hpa;	/* mod's register set address */

arch/parisc/kernel/drivers.c

@@ -882,15 +882,13 @@ void __init walk_central_bus(void)
 			&root);
 }
 
-static void print_parisc_device(struct parisc_device *dev)
+static __init void print_parisc_device(struct parisc_device *dev)
 {
-	char hw_path[64];
-	static int count;
+	static int count __initdata;
 
-	print_pa_hwpath(dev, hw_path);
-	pr_info("%d. %s at %pap [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }",
-		++count, dev->name, &(dev->hpa.start), hw_path, dev->id.hw_type,
-		dev->id.hversion_rev, dev->id.hversion, dev->id.sversion);
+	pr_info("%d. %s at %pap { type:%d, hv:%#x, sv:%#x, rev:%#x }",
+		++count, dev->name, &(dev->hpa.start), dev->id.hw_type,
+		dev->id.hversion, dev->id.sversion, dev->id.hversion_rev);
 
 	if (dev->num_addrs) {
 		int k;
@@ -1079,7 +1077,7 @@ static __init int qemu_print_iodc_data(struct device *lin_dev, void *data)
 
 
 
-static int print_one_device(struct device * dev, void * data)
+static __init int print_one_device(struct device * dev, void * data)
 {
 	struct parisc_device * pdev = to_parisc_device(dev);
 

drivers/parisc/iosapic.c

@@ -866,6 +866,7 @@ int iosapic_serial_irq(struct parisc_device *dev)
 
 	return vi->txn_irq;
 }
+EXPORT_SYMBOL(iosapic_serial_irq);
 #endif
 
 

drivers/parisc/pdc_stable.c

@@ -14,7 +14,7 @@
  *    all) PA-RISC machines should have them. Anyway, for safety reasons, the
  *    following code can deal with just 96 bytes of Stable Storage, and all
  *    sizes between 96 and 192 bytes (provided they are multiple of struct
- *    device_path size, eg: 128, 160 and 192) to provide full information.
+ *    pdc_module_path size, eg: 128, 160 and 192) to provide full information.
  *    One last word: there's one path we can always count on: the primary path.
  *    Anything above 224 bytes is used for 'osdep2' OS-dependent storage area.
  *
@@ -88,7 +88,7 @@ struct pdcspath_entry {
 	short ready;			/* entry record is valid if != 0 */
 	unsigned long addr;		/* entry address in stable storage */
 	char *name;			/* entry name */
-	struct device_path devpath;	/* device path in parisc representation */
+	struct pdc_module_path devpath;	/* device path in parisc representation */
 	struct device *dev;		/* corresponding device */
 	struct kobject kobj;
 };
@@ -138,7 +138,7 @@ struct pdcspath_attribute paths_attr_##_name = { \
 static int
 pdcspath_fetch(struct pdcspath_entry *entry)
 {
-	struct device_path *devpath;
+	struct pdc_module_path *devpath;
 
 	if (!entry)
 		return -EINVAL;
@@ -153,7 +153,7 @@ pdcspath_fetch(struct pdcspath_entry *entry)
 		return -EIO;
 
 	/* Find the matching device.
-	   NOTE: hardware_path overlays with device_path, so the nice cast can
+	   NOTE: hardware_path overlays with pdc_module_path, so the nice cast can
 	   be used */
 	entry->dev = hwpath_to_device((struct hardware_path *)devpath);
 
@@ -179,7 +179,7 @@ pdcspath_fetch(struct pdcspath_entry *entry)
 static void
 pdcspath_store(struct pdcspath_entry *entry)
 {
-	struct device_path *devpath;
+	struct pdc_module_path *devpath;
 
 	BUG_ON(!entry);
 
@@ -221,7 +221,7 @@ static ssize_t
 pdcspath_hwpath_read(struct pdcspath_entry *entry, char *buf)
 {
 	char *out = buf;
-	struct device_path *devpath;
+	struct pdc_module_path *devpath;
 	short i;
 
 	if (!entry || !buf)
@@ -236,11 +236,11 @@ pdcspath_hwpath_read(struct pdcspath_entry *entry, char *buf)
 		return -ENODATA;
 
 	for (i = 0; i < 6; i++) {
-		if (devpath->bc[i] >= 128)
+		if (devpath->path.bc[i] < 0)
 			continue;
-		out += sprintf(out, "%u/", (unsigned char)devpath->bc[i]);
+		out += sprintf(out, "%d/", devpath->path.bc[i]);
 	}
-	out += sprintf(out, "%u\n", (unsigned char)devpath->mod);
+	out += sprintf(out, "%u\n", (unsigned char)devpath->path.mod);
 
 	return out - buf;
 }
@@ -296,12 +296,12 @@ pdcspath_hwpath_write(struct pdcspath_entry *entry, const char *buf, size_t coun
 	for (i=5; ((temp = strrchr(in, '/'))) && (temp-in > 0) && (likely(i)); i--) {
 		hwpath.bc[i] = simple_strtoul(temp+1, NULL, 10);
 		in[temp-in] = '\0';
-		DPRINTK("%s: bc[%d]: %d\n", __func__, i, hwpath.bc[i]);
+		DPRINTK("%s: bc[%d]: %d\n", __func__, i, hwpath.path.bc[i]);
 	}
 
 	/* Store the final field */		
 	hwpath.bc[i] = simple_strtoul(in, NULL, 10);
-	DPRINTK("%s: bc[%d]: %d\n", __func__, i, hwpath.bc[i]);
+	DPRINTK("%s: bc[%d]: %d\n", __func__, i, hwpath.path.bc[i]);
 
 	/* Now we check that the user isn't trying to lure us */
 	if (!(dev = hwpath_to_device((struct hardware_path *)&hwpath))) {
@@ -342,7 +342,7 @@ static ssize_t
 pdcspath_layer_read(struct pdcspath_entry *entry, char *buf)
 {
 	char *out = buf;
-	struct device_path *devpath;
+	struct pdc_module_path *devpath;
 	short i;
 
 	if (!entry || !buf)
@@ -547,7 +547,7 @@ static ssize_t pdcs_auto_read(struct kobject *kobj,
 	pathentry = &pdcspath_entry_primary;
 
 	read_lock(&pathentry->rw_lock);
-	out += sprintf(out, "%s\n", (pathentry->devpath.flags & knob) ?
+	out += sprintf(out, "%s\n", (pathentry->devpath.path.flags & knob) ?
 					"On" : "Off");
 	read_unlock(&pathentry->rw_lock);
 
@@ -594,8 +594,8 @@ static ssize_t pdcs_timer_read(struct kobject *kobj,
 
 	/* print the timer value in seconds */
 	read_lock(&pathentry->rw_lock);
-	out += sprintf(out, "%u\n", (pathentry->devpath.flags & PF_TIMER) ?
-				(1 << (pathentry->devpath.flags & PF_TIMER)) : 0);
+	out += sprintf(out, "%u\n", (pathentry->devpath.path.flags & PF_TIMER) ?
+				(1 << (pathentry->devpath.path.flags & PF_TIMER)) : 0);
 	read_unlock(&pathentry->rw_lock);
 
 	return out - buf;
@@ -764,7 +764,7 @@ static ssize_t pdcs_auto_write(struct kobject *kobj,
 
 	/* Be nice to the existing flag record */
 	read_lock(&pathentry->rw_lock);
-	flags = pathentry->devpath.flags;
+	flags = pathentry->devpath.path.flags;
 	read_unlock(&pathentry->rw_lock);
 
 	DPRINTK("%s: flags before: 0x%X\n", __func__, flags);
@@ -785,7 +785,7 @@ static ssize_t pdcs_auto_write(struct kobject *kobj,
 	write_lock(&pathentry->rw_lock);
 
 	/* Change the path entry flags first */
-	pathentry->devpath.flags = flags;
+	pathentry->devpath.path.flags = flags;
 
 	/* Now, dive in. Write back to the hardware */
 	pdcspath_store(pathentry);

drivers/tty/serial/8250/Kconfig

@@ -116,9 +116,9 @@ config SERIAL_8250_CONSOLE
 
 	  If unsure, say N.
 
-config SERIAL_8250_GSC
+config SERIAL_8250_PARISC
 	tristate
-	depends on SERIAL_8250 && GSC
+	depends on SERIAL_8250 && PARISC
 	default SERIAL_8250
 
 config SERIAL_8250_DMA

drivers/tty/serial/8250/Makefile

@@ -12,7 +12,7 @@ obj-$(CONFIG_SERIAL_8250)		+= 8250.o 8250_base.o
 8250_base-$(CONFIG_SERIAL_8250_DMA)	+= 8250_dma.o
 8250_base-$(CONFIG_SERIAL_8250_DWLIB)	+= 8250_dwlib.o
 8250_base-$(CONFIG_SERIAL_8250_FINTEK)	+= 8250_fintek.o
-obj-$(CONFIG_SERIAL_8250_GSC)		+= 8250_gsc.o
+obj-$(CONFIG_SERIAL_8250_PARISC)	+= 8250_parisc.o
 obj-$(CONFIG_SERIAL_8250_PCI)		+= 8250_pci.o
 obj-$(CONFIG_SERIAL_8250_EXAR)		+= 8250_exar.o
 obj-$(CONFIG_SERIAL_8250_HP300)		+= 8250_hp300.o