Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/…

…djbw/async_tx

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (28 commits)
  ioat: cleanup ->timer_fn() and ->cleanup_fn() prototypes
  ioat3: interrupt coalescing
  ioat: close potential BUG_ON race in the descriptor cleanup path
  ioat2: kill pending flag
  ioat3: use ioat2_quiesce()
  ioat3: cleanup, don't enable DCA completion writes
  DMAENGINE: COH 901 318 lli sg offset fix
  DMAENGINE: COH 901 318 configure channel direction
  DMAENGINE: COH 901 318 remove irq counting
  DMAENGINE: COH 901 318 descriptor pool refactoring
  DMAENGINE: COH 901 318 cleanups
  dma: Add MPC512x DMA driver
  Debugging options for the DMA engine subsystem
  iop-adma: redundant/wrong tests in iop_*_count()?
  dmatest: fix handling of an even number of xor_sources
  dmatest: correct raid6 PQ test
  fsldma: Fix cookie issues
  fsldma: Fix cookie issues
  dma: cases IPU_PIX_FMT_BGRA32, BGR32 and ABGR32 are the same in ipu_ch_param_set_size()
  dma: make Open Firmware device id constant
  ...

Documentation/powerpc/dts-bindings/fsl/dma.txt

@@ -44,21 +44,29 @@ Example:
 			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 			cell-index = <0>;
 			reg = <0 0x80>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
 		};
 		dma-channel@80 {
 			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 			cell-index = <1>;
 			reg = <0x80 0x80>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
 		};
 		dma-channel@100 {
 			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 			cell-index = <2>;
 			reg = <0x100 0x80>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
 		};
 		dma-channel@180 {
 			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 			cell-index = <3>;
 			reg = <0x180 0x80>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
 		};
 	};
 

arch/arm/include/asm/hardware/iop3xx-adma.h

@@ -366,8 +366,7 @@ static inline int iop_chan_xor_slot_count(size_t len, int src_cnt,
 		slot_cnt += *slots_per_op;
 	}
 
-	if (len)
-		slot_cnt += *slots_per_op;
+	slot_cnt += *slots_per_op;
 
 	return slot_cnt;
 }
@@ -389,8 +388,7 @@ static inline int iop_chan_zero_sum_slot_count(size_t len, int src_cnt,
 		slot_cnt += *slots_per_op;
 	}
 
-	if (len)
-		slot_cnt += *slots_per_op;
+	slot_cnt += *slots_per_op;
 
 	return slot_cnt;
 }
@@ -737,10 +735,8 @@ iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
 			i += slots_per_op;
 		} while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT);
 
-		if (len) {
-			iter = iop_hw_desc_slot_idx(hw_desc, i);
-			iter->byte_count = len;
-		}
+		iter = iop_hw_desc_slot_idx(hw_desc, i);
+		iter->byte_count = len;
 	}
 }
 

arch/arm/mach-u300/include/mach/coh901318.h

@@ -53,7 +53,7 @@ struct coh901318_params {
  * struct coh_dma_channel - dma channel base
  * @name: ascii name of dma channel
  * @number: channel id number
- * @desc_nbr_max: number of preallocated descriptortors
+ * @desc_nbr_max: number of preallocated descriptors
  * @priority_high: prio of channel, 0 low otherwise high.
  * @param: configuration parameters
  * @dev_addr: physical address of periphal connected to channel

drivers/dma/Kconfig

@@ -13,6 +13,22 @@ menuconfig DMADEVICES
 	  DMA Device drivers supported by the configured arch, it may
 	  be empty in some cases.
 
+config DMADEVICES_DEBUG
+        bool "DMA Engine debugging"
+        depends on DMADEVICES != n
+        help
+          This is an option for use by developers; most people should
+          say N here.  This enables DMA engine core and driver debugging.
+
+config DMADEVICES_VDEBUG
+        bool "DMA Engine verbose debugging"
+        depends on DMADEVICES_DEBUG != n
+        help
+          This is an option for use by developers; most people should
+          say N here.  This enables deeper (more verbose) debugging of
+          the DMA engine core and drivers.
+
+
 if DMADEVICES
 
 comment "DMA Devices"
@@ -69,6 +85,13 @@ config FSL_DMA
 	  The Elo is the DMA controller on some 82xx and 83xx parts, and the
 	  Elo Plus is the DMA controller on 85xx and 86xx parts.
 
+config MPC512X_DMA
+	tristate "Freescale MPC512x built-in DMA engine support"
+	depends on PPC_MPC512x
+	select DMA_ENGINE
+	---help---
+	  Enable support for the Freescale MPC512x built-in DMA engine.
+
 config MV_XOR
 	bool "Marvell XOR engine support"
 	depends on PLAT_ORION

drivers/dma/Makefile

@@ -1,9 +1,17 @@
+ifeq ($(CONFIG_DMADEVICES_DEBUG),y)
+	EXTRA_CFLAGS	+= -DDEBUG
+endif
+ifeq ($(CONFIG_DMADEVICES_VDEBUG),y)
+	EXTRA_CFLAGS	+= -DVERBOSE_DEBUG
+endif
+
 obj-$(CONFIG_DMA_ENGINE) += dmaengine.o
 obj-$(CONFIG_NET_DMA) += iovlock.o
 obj-$(CONFIG_DMATEST) += dmatest.o
 obj-$(CONFIG_INTEL_IOATDMA) += ioat/
 obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
 obj-$(CONFIG_FSL_DMA) += fsldma.o
+obj-$(CONFIG_MPC512X_DMA) += mpc512x_dma.o
 obj-$(CONFIG_MV_XOR) += mv_xor.o
 obj-$(CONFIG_DW_DMAC) += dw_dmac.o
 obj-$(CONFIG_AT_HDMAC) += at_hdmac.o