Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/jikos/trivial

Pull trivial tree update from Jiri Kosina:
 "Usual stuff: documentation updates, printk() fixes, etc"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits)
  intel_ips: fix a type in error message
  cpufreq: cpufreq-dt: Move newline to end of error message
  ps3rom: fix error return code
  treewide: fix typo in printk and Kconfig
  ARM: dts: bcm63138: change "interupts" to "interrupts"
  Replace mentions of "list_struct" to "list_head"
  kernel: trace: fix printk message
  scsi: mpt2sas: fix ioctl in comment
  zbud, zswap: change module author email
  clocksource: Fix 'clcoksource' typo in comment
  arm: fix wording of "Crotex" in CONFIG_ARCH_EXYNOS3 help
  gpio: msm-v1: make boolean argument more obvious
  usb: Fix typo in usb-serial-simple.c
  PCI: Fix comment typo 'COMFIG_PM_OPS'
  powerpc: Fix comment typo 'CONIFG_8xx'
  powerpc: Fix comment typos 'CONFiG_ALTIVEC'
  clk: st: Spelling s/stucture/structure/
  isci: Spelling s/stucture/structure/
  usb: gadget: zero: Spelling s/infrastucture/infrastructure/
  treewide: Fix company name in module descriptions
  ...

Documentation/devicetree/bindings/clock/st/st,flexgen.txt

@@ -11,7 +11,7 @@ Please find an example below:
 
     Clockgen block diagram
     -------------------------------------------------------------------
-   |                     Flexgen stucture                              |
+   |                     Flexgen structure                             |
    |                  ---------------------------------------------    |
    |                 |    -------       --------       --------    |   |
 clk_sysin            |   |       |     |        |     |        |   |   |

Documentation/scsi/scsi_eh.txt

@@ -172,7 +172,7 @@ ways.
 
  - eh_strategy_handler() callback
 	This is one big callback which should perform whole error
-	handling.  As such, it should do all choirs SCSI midlayer
+	handling.  As such, it should do all chores the SCSI midlayer
 	performs during recovery.  This will be discussed in [2-2].
 
  Once recovery is complete, SCSI EH resumes normal operation by
@@ -428,7 +428,7 @@ scmd->allowed.
 scsi_unjam_host() and it is responsible for whole recovery process.
 On completion, the handler should have made lower layers forget about
 all failed scmds and either ready for new commands or offline.  Also,
-it should perform SCSI EH maintenance choirs to maintain integrity of
+it should perform SCSI EH maintenance chores to maintain integrity of
 SCSI midlayer.  IOW, of the steps described in [2-1-2], all steps
 except for #1 must be implemented by eh_strategy_handler().
 

Documentation/usb/gadget_configfs.txt

@@ -376,7 +376,7 @@ functions and binds them. This way the whole gadget is bound.
 configured, so config_groups for particular functions are defined
 in the functions implementation files drivers/usb/gadget/f_*.c.
 
-5. Funciton's code is written in such a way that it uses
+5. Function's code is written in such a way that it uses
 
 usb_get_function_instance(), which, in turn, calls request_module.
 So, provided that modprobe works, modules for particular functions

arch/arm/boot/dts/bcm63138.dtsi

@@ -102,7 +102,7 @@
 		twd_watchdog: watchdog@1e620 {
 			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0x1e620 0x20>;
-			interupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		};
 	};
 

arch/arm/mach-exynos/Kconfig

@@ -34,7 +34,7 @@ config ARCH_EXYNOS3
 	bool "SAMSUNG EXYNOS3"
 	select ARM_CPU_SUSPEND if PM
 	help
-	  Samsung EXYNOS3 (Crotex-A7) SoC based systems
+	  Samsung EXYNOS3 (Cortex-A7) SoC based systems
 
 config ARCH_EXYNOS4
 	bool "SAMSUNG EXYNOS4"

arch/mips/cavium-octeon/setup.c

@@ -1092,7 +1092,7 @@ static int __init edac_devinit(void)
 		name = edac_device_names[i];
 		dev = platform_device_register_simple(name, -1, NULL, 0);
 		if (IS_ERR(dev)) {
-			pr_err("Registation of %s failed!\n", name);
+			pr_err("Registration of %s failed!\n", name);
 			err = PTR_ERR(dev);
 		}
 	}
@@ -1103,7 +1103,7 @@ static int __init edac_devinit(void)
 		dev = platform_device_register_simple("octeon_lmc_edac",
 						      i, NULL, 0);
 		if (IS_ERR(dev)) {
-			pr_err("Registation of octeon_lmc_edac %d failed!\n", i);
+			pr_err("Registration of octeon_lmc_edac %d failed!\n", i);
 			err = PTR_ERR(dev);
 		}
 	}

arch/mips/pci/pci-octeon.c

@@ -708,7 +708,7 @@ static int __init octeon_pci_setup(void)
 
 	if (IS_ERR(platform_device_register_simple("octeon_pci_edac",
 						   -1, NULL, 0)))
-		pr_err("Registation of co_pci_edac failed!\n");
+		pr_err("Registration of co_pci_edac failed!\n");
 
 	octeon_pci_dma_init();
 

arch/powerpc/kvm/e500_mmu_host.c

@@ -661,7 +661,7 @@ int kvmppc_load_last_inst(struct kvm_vcpu *vcpu, enum instruction_type type,
 	if (unlikely((pr && !(mas3 & MAS3_UX)) ||
 		     (!pr && !(mas3 & MAS3_SX)))) {
 		pr_err_ratelimited(
-			"%s: Instuction emulation from guest addres %08lx without execute permission\n",
+			"%s: Instruction emulation from guest address %08lx without execute permission\n",
 			__func__, geaddr);
 		return EMULATE_AGAIN;
 	}
@@ -673,7 +673,7 @@ int kvmppc_load_last_inst(struct kvm_vcpu *vcpu, enum instruction_type type,
 	if (has_feature(vcpu, VCPU_FTR_MMU_V2) &&
 	    unlikely((mas2 & MAS2_I) || (mas2 & MAS2_W) || !(mas2 & MAS2_M))) {
 		pr_err_ratelimited(
-			"%s: Instuction emulation from guest addres %08lx mismatches storage attributes\n",
+			"%s: Instruction emulation from guest address %08lx mismatches storage attributes\n",
 			__func__, geaddr);
 		return EMULATE_AGAIN;
 	}
@@ -686,7 +686,7 @@ int kvmppc_load_last_inst(struct kvm_vcpu *vcpu, enum instruction_type type,
 
 	/* Guard against emulation from devices area */
 	if (unlikely(!page_is_ram(pfn))) {
-		pr_err_ratelimited("%s: Instruction emulation from non-RAM host addres %08llx is not supported\n",
+		pr_err_ratelimited("%s: Instruction emulation from non-RAM host address %08llx is not supported\n",
 			 __func__, addr);
 		return EMULATE_AGAIN;
 	}

arch/powerpc/lib/copyuser_power7.S

@@ -718,4 +718,4 @@ err3;	stb	r0,0(r3)
 
 15:	addi	r1,r1,STACKFRAMESIZE
 	b	exit_vmx_usercopy	/* tail call optimise */
-#endif /* CONFiG_ALTIVEC */
+#endif /* CONFIG_ALTIVEC */

arch/powerpc/lib/memcpy_power7.S

@@ -653,4 +653,4 @@ _GLOBAL(memcpy_power7)
 15:	addi	r1,r1,STACKFRAMESIZE
 	ld	r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
 	b	exit_vmx_copy		/* tail call optimise */
-#endif /* CONFiG_ALTIVEC */
+#endif /* CONFIG_ALTIVEC */

arch/powerpc/mm/mmu_decl.h

@@ -67,7 +67,7 @@ static inline void _tlbil_va(unsigned long address, unsigned int pid,
 {
 	__tlbil_va(address, pid);
 }
-#endif /* CONIFG_8xx */
+#endif /* CONFIG_8xx */
 
 #if defined(CONFIG_PPC_BOOK3E) || defined(CONFIG_PPC_47x)
 extern void _tlbivax_bcast(unsigned long address, unsigned int pid,

arch/powerpc/platforms/44x/Kconfig

@@ -220,7 +220,6 @@ config AKEBONO
 	select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
 	select MMC_SDHCI
 	select MMC_SDHCI_PLTFM
-	select MMC_SDHCI_OF_476GTR
 	select ATA
 	select SATA_AHCI_PLATFORM
 	help

drivers/clk/Kconfig

@@ -28,7 +28,7 @@ config COMMON_CLK_WM831X
 	depends on MFD_WM831X
 	---help---
           Supports the clocking subsystem of the WM831x/2x series of
-	  PMICs from Wolfson Microlectronics.
+	  PMICs from Wolfson Microelectronics.
 
 source "drivers/clk/versatile/Kconfig"
 

drivers/cpufreq/cpufreq-dt.c

@@ -197,7 +197,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 
 	ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk);
 	if (ret) {
-		pr_err("%s: Failed to allocate resources\n: %d", __func__, ret);
+		pr_err("%s: Failed to allocate resources: %d\n", __func__, ret);
 		return ret;
 	}
 

drivers/gpio/gpio-msm-v1.c

@@ -686,7 +686,7 @@ static int gpio_msm_v1_probe(struct platform_device *pdev)
 	irq_set_chained_handler(irq1, msm_gpio_irq_handler);
 	irq_set_chained_handler(irq2, msm_gpio_irq_handler);
 	irq_set_irq_wake(irq1, 1);
-	irq_set_irq_wake(irq2, 2);
+	irq_set_irq_wake(irq2, 1);
 	return 0;
 }
 

drivers/gpio/gpio-spear-spics.c

@@ -204,5 +204,5 @@ static int __init spics_gpio_init(void)
 subsys_initcall(spics_gpio_init);
 
 MODULE_AUTHOR("Shiraz Hashim <[email protected]>");
-MODULE_DESCRIPTION("ST Microlectronics SPEAr SPI Chip Select Abstraction");
+MODULE_DESCRIPTION("STMicroelectronics SPEAr SPI Chip Select Abstraction");
 MODULE_LICENSE("GPL");

drivers/gpu/drm/radeon/mkregtable.c

@@ -347,7 +347,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_entry - get the struct for this entry
  * @ptr:	the &struct list_head pointer.
  * @type:	the type of the struct this is embedded in.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  */
 #define list_entry(ptr, type, member) \
 	container_of(ptr, type, member)
@@ -356,7 +356,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_first_entry - get the first element from a list
  * @ptr:	the list head to take the element from.
  * @type:	the type of the struct this is embedded in.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Note, that list is expected to be not empty.
  */
@@ -406,7 +406,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_for_each_entry	-	iterate over list of given type
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  */
 #define list_for_each_entry(pos, head, member)				\
 	for (pos = list_entry((head)->next, typeof(*pos), member);	\
@@ -417,7 +417,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_for_each_entry_reverse - iterate backwards over list of given type.
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  */
 #define list_for_each_entry_reverse(pos, head, member)			\
 	for (pos = list_entry((head)->prev, typeof(*pos), member);	\
@@ -428,7 +428,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue()
  * @pos:	the type * to use as a start point
  * @head:	the head of the list
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Prepares a pos entry for use as a start point in list_for_each_entry_continue().
  */
@@ -439,7 +439,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_for_each_entry_continue - continue iteration over list of given type
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Continue to iterate over list of given type, continuing after
  * the current position.
@@ -453,7 +453,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_for_each_entry_continue_reverse - iterate backwards from the given point
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Start to iterate over list of given type backwards, continuing after
  * the current position.
@@ -467,7 +467,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_for_each_entry_from - iterate over list of given type from the current point
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Iterate over list of given type, continuing from current position.
  */
@@ -480,7 +480,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * @pos:	the type * to use as a loop cursor.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  */
 #define list_for_each_entry_safe(pos, n, head, member)			\
 	for (pos = list_entry((head)->next, typeof(*pos), member),	\
@@ -493,7 +493,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * @pos:	the type * to use as a loop cursor.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Iterate over list of given type, continuing after current point,
  * safe against removal of list entry.
@@ -509,7 +509,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * @pos:	the type * to use as a loop cursor.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Iterate over list of given type from current point, safe against
  * removal of list entry.
@@ -524,7 +524,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * @pos:	the type * to use as a loop cursor.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Iterate backwards over list of given type, safe against removal
  * of list entry.

drivers/isdn/mISDN/l1oip_core.c

@@ -1334,7 +1334,7 @@ init_card(struct l1oip *hc, int pri, int bundle)
 	if (id[l1oip_cnt] == 0) {
 		printk(KERN_WARNING "Warning: No 'id' value given or "
 		       "0, this is highly unsecure. Please use 32 "
-		       "bit randmom number 0x...\n");
+		       "bit random number 0x...\n");
 	}
 	hc->id = id[l1oip_cnt];
 	if (debug & DEBUG_L1OIP_INIT)

drivers/media/pci/cx18/cx18-driver.h

@@ -290,7 +290,7 @@ struct cx18_options {
  * list_entry_is_past_end - check if a previous loop cursor is off list end
  * @pos:	the type * previously used as a loop cursor.
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Check if the entry's list_head is the head of the list, thus it's not a
  * real entry but was the loop cursor that walked past the end

drivers/media/pci/ttpci/budget-patch.c

@@ -490,7 +490,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
 
 	if(detected == 0)
 		printk("budget-patch not detected or saa7146 in non-default state.\n"
-		       "try enabling ressetting of 7146 with MASK_31 in MC1 register\n");
+		       "try enabling resetting of 7146 with MASK_31 in MC1 register\n");
 
 	else
 		printk("BUDGET-PATCH DETECTED.\n");

drivers/net/ethernet/atheros/atl1c/atl1c_main.c

@@ -48,7 +48,7 @@ MODULE_DEVICE_TABLE(pci, atl1c_pci_tbl);
 
 MODULE_AUTHOR("Jie Yang");
 MODULE_AUTHOR("Qualcomm Atheros Inc., <[email protected]>");
-MODULE_DESCRIPTION("Qualcom Atheros 100/1000M Ethernet Network Driver");
+MODULE_DESCRIPTION("Qualcomm Atheros 100/1000M Ethernet Network Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(ATL1C_DRV_VERSION);
 

drivers/pinctrl/spear/pinctrl-plgpio.c

@@ -724,5 +724,5 @@ static int __init plgpio_init(void)
 subsys_initcall(plgpio_init);
 
 MODULE_AUTHOR("Viresh Kumar <[email protected]>");
-MODULE_DESCRIPTION("ST Microlectronics SPEAr PLGPIO driver");
+MODULE_DESCRIPTION("STMicroelectronics SPEAr PLGPIO driver");
 MODULE_LICENSE("GPL");

drivers/platform/x86/intel_ips.c

@@ -593,7 +593,7 @@ static void ips_disable_gpu_turbo(struct ips_driver *ips)
 		return;
 
 	if (!ips->gpu_turbo_disable())
-		dev_err(&ips->dev->dev, "failed to disable graphis turbo\n");
+		dev_err(&ips->dev->dev, "failed to disable graphics turbo\n");
 	else
 		ips->__gpu_turbo_on = false;
 }

drivers/s390/char/tape_3590.c

@@ -1090,7 +1090,7 @@ tape_3590_print_io_sim_msg_f1(struct tape_device *device, struct irb *irb)
 				"channel path 0x%x on CU",
 				sense->fmt.f71.md[1]);
 		else
-			snprintf(service, BUFSIZE, "Repair will disable cannel"
+			snprintf(service, BUFSIZE, "Repair will disable channel"
 				" paths (0x%x-0x%x) on CU",
 				sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
 		break;
@@ -1481,7 +1481,7 @@ tape_3590_irq(struct tape_device *device, struct tape_request *request,
 	}
 
 	if (irb->scsw.cmd.dstat & DEV_STAT_CHN_END) {
-		DBF_EVENT(2, "cannel end\n");
+		DBF_EVENT(2, "channel end\n");
 		return TAPE_IO_PENDING;
 	}
 

drivers/scsi/isci/task.c

@@ -588,7 +588,7 @@ int isci_task_abort_task(struct sas_task *task)
 
 		ret = TMF_RESP_FUNC_COMPLETE;
 	} else {
-		/* Fill in the tmf stucture */
+		/* Fill in the tmf structure */
 		isci_task_build_abort_task_tmf(&tmf, isci_tmf_ssp_task_abort,
 					       old_request);
 

drivers/scsi/mac_scsi.c

@@ -166,7 +166,7 @@ static void mac_scsi_reset_boot(struct Scsi_Host *instance)
    XXX: Since bus errors in the PDMA routines never happen on my 
    computer, the bus error code is untested. 
    If the code works as intended, a bus error results in Pseudo-DMA 
-   beeing disabled, meaning that the driver switches to slow handshake. 
+   being disabled, meaning that the driver switches to slow handshake.
    If bus errors are NOT extremely rare, this has to be changed. 
 */
 

drivers/scsi/megaraid/megaraid_sas_base.c

@@ -6783,7 +6783,7 @@ static int __init megasas_init(void)
 	rval = pci_register_driver(&megasas_pci_driver);
 
 	if (rval) {
-		printk(KERN_DEBUG "megasas: PCI hotplug regisration failed \n");
+		printk(KERN_DEBUG "megasas: PCI hotplug registration failed \n");
 		goto err_pcidrv;
 	}
 

drivers/scsi/mpt2sas/mpt2sas_ctl.h

@@ -224,7 +224,7 @@ struct mpt2_ioctl_eventreport {
 };
 
 /**
- * struct mpt2_ioctl_command - generic mpt firmware passthru ioclt
+ * struct mpt2_ioctl_command - generic mpt firmware passthru ioctl
  * @hdr - generic header
  * @timeout - command timeout in seconds. (if zero then use driver default
  *  value).

drivers/scsi/ps3rom.c

@@ -383,6 +383,7 @@ static int ps3rom_probe(struct ps3_system_bus_device *_dev)
 	if (!host) {
 		dev_err(&dev->sbd.core, "%s:%u: scsi_host_alloc failed\n",
 			__func__, __LINE__);
+		error = -ENOMEM;
 		goto fail_teardown;
 	}