Merge tag 'for-linus-20140405' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 - A few SPI NOR ID definitions
 - Kill the NAND "max pagesize" restriction
 - Fix some x16 bus-width NAND support
 - Add NAND JEDEC parameter page support
 - DT bindings for NAND ECC
 - GPMI NAND updates (subpage reads)
 - More OMAP NAND refactoring
 - New STMicro SPI NOR driver (now in 40 patches!)
 - A few other random bugfixes

* tag 'for-linus-20140405' of git://git.infradead.org/linux-mtd: (120 commits)
  Fix index regression in nand_read_subpage
  mtd: diskonchip: mem resource name is not optional
  mtd: nand: fix mention to CONFIG_MTD_NAND_ECC_BCH
  mtd: nand: fix GET/SET_FEATURES address on 16-bit devices
  mtd: omap2: Use devm_ioremap_resource()
  mtd: denali_dt: Use devm_ioremap_resource()
  mtd: devices: elm: update DRIVER_NAME as "omap-elm"
  mtd: devices: elm: configure parallel channels based on ecc_steps
  mtd: devices: elm: clean elm_load_syndrome
  mtd: devices: elm: check for hardware engine's design constraints
  mtd: st_spi_fsm: Succinctly reorganise .remove()
  mtd: st_spi_fsm: Allow loop to run at least once before giving up CPU
  mtd: st_spi_fsm: Correct vendor name spelling issue - missing "M"
  mtd: st_spi_fsm: Avoid duplicating MTD core code
  mtd: st_spi_fsm: Remove useless consts from function arguments
  mtd: st_spi_fsm: Convert ST SPI FSM (NOR) Flash driver to new DT partitions
  mtd: st_spi_fsm: Move runtime configurable msg sequences into device's struct
  mtd: st_spi_fsm: Supply the W25Qxxx chip specific configuration call-back
  mtd: st_spi_fsm: Supply the S25FLxxx chip specific configuration call-back
  mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back
  ...

Documentation/devicetree/bindings/mtd/nand.txt

@@ -5,3 +5,17 @@
   "soft_bch".
 - nand-bus-width : 8 or 16 bus width if not present 8
 - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
+
+- nand-ecc-strength: integer representing the number of bits to correct
+		     per ECC step.
+
+- nand-ecc-step-size: integer representing the number of data bytes
+		      that are covered by a single ECC step.
+
+The ECC strength and ECC step size properties define the correction capability
+of a controller. Together, they say a controller can correct "{strength} bit
+errors per {size} bytes".
+
+The interpretation of these parameters is implementation-defined, so not all
+implementations must support all possible combinations. However, implementations
+are encouraged to further specify the value(s) they support.

Documentation/devicetree/bindings/mtd/st-fsm.txt

@@ -0,0 +1,26 @@
+* ST-Microelectronics SPI FSM Serial (NOR) Flash Controller
+
+Required properties:
+  - compatible : Should be "st,spi-fsm"
+  - reg        : Contains register's location and length.
+  - reg-names  : Should contain the reg names "spi-fsm"
+  - interrupts : The interrupt number
+  - pinctrl-0  : Standard Pinctrl phandle (see: pinctrl/pinctrl-bindings.txt)
+
+Optional properties:
+  - st,syscfg          : Phandle to boot-device system configuration registers
+  - st,boot-device-reg : Address of the aforementioned boot-device register(s)
+  - st,boot-device-spi : Expected boot-device value if booted via this device
+
+Example:
+	spifsm: spifsm@fe902000{
+	        compatible         = "st,spi-fsm";
+	        reg                =  <0xfe902000 0x1000>;
+	        reg-names          = "spi-fsm";
+	        pinctrl-0          = <&pinctrl_fsm>;
+		st,syscfg	   = <&syscfg_rear>;
+	        st,boot-device-reg = <0x958>;
+	        st,boot-device-spi = <0x1a>;
+		status = "okay";
+	};
+

drivers/mtd/Kconfig

@@ -150,7 +150,7 @@ config MTD_BCM63XX_PARTS
 
 config MTD_BCM47XX_PARTS
 	tristate "BCM47XX partitioning support"
-	depends on BCM47XX
+	depends on BCM47XX || ARCH_BCM_5301X
 	help
 	  This provides partitions parser for devices based on BCM47xx
 	  boards.

drivers/mtd/bcm47xxpart.c

@@ -14,7 +14,6 @@
 #include <linux/slab.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <bcm47xx_nvram.h>
 
 /* 10 parts were found on sflash on Netgear WNDR4500 */
 #define BCM47XXPART_MAX_PARTS		12
@@ -30,6 +29,7 @@
 #define BOARD_DATA_MAGIC2		0xBD0D0BBD
 #define CFE_MAGIC			0x43464531	/* 1EFC */
 #define FACTORY_MAGIC			0x59544346	/* FCTY */
+#define NVRAM_HEADER			0x48534C46	/* FLSH */
 #define POT_MAGIC1			0x54544f50	/* POTT */
 #define POT_MAGIC2			0x504f		/* OP */
 #define ML_MAGIC1			0x39685a42
@@ -91,7 +91,7 @@ static int bcm47xxpart_parse(struct mtd_info *master,
 		if (offset >= 0x2000000)
 			break;
 
-		if (curr_part > BCM47XXPART_MAX_PARTS) {
+		if (curr_part >= BCM47XXPART_MAX_PARTS) {
 			pr_warn("Reached maximum number of partitions, scanning stopped!\n");
 			break;
 		}
@@ -147,6 +147,11 @@ static int bcm47xxpart_parse(struct mtd_info *master,
 
 		/* TRX */
 		if (buf[0x000 / 4] == TRX_MAGIC) {
+			if (BCM47XXPART_MAX_PARTS - curr_part < 4) {
+				pr_warn("Not enough partitions left to register trx, scanning stopped!\n");
+				break;
+			}
+
 			trx = (struct trx_header *)buf;
 
 			trx_part = curr_part;
@@ -212,7 +217,7 @@ static int bcm47xxpart_parse(struct mtd_info *master,
 
 	/* Look for NVRAM at the end of the last block. */
 	for (i = 0; i < ARRAY_SIZE(possible_nvram_sizes); i++) {
-		if (curr_part > BCM47XXPART_MAX_PARTS) {
+		if (curr_part >= BCM47XXPART_MAX_PARTS) {
 			pr_warn("Reached maximum number of partitions, scanning stopped!\n");
 			break;
 		}

drivers/mtd/chips/cfi_cmdset_0001.c

@@ -21,7 +21,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/init.h>
 #include <asm/io.h>
 #include <asm/byteorder.h>
 
@@ -69,10 +68,10 @@ static int cfi_intelext_read_fact_prot_reg (struct mtd_info *, loff_t, size_t, s
 static int cfi_intelext_read_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int cfi_intelext_write_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int cfi_intelext_lock_user_prot_reg (struct mtd_info *, loff_t, size_t);
-static int cfi_intelext_get_fact_prot_info (struct mtd_info *,
-					    struct otp_info *, size_t);
-static int cfi_intelext_get_user_prot_info (struct mtd_info *,
-					    struct otp_info *, size_t);
+static int cfi_intelext_get_fact_prot_info(struct mtd_info *, size_t,
+					   size_t *, struct otp_info *);
+static int cfi_intelext_get_user_prot_info(struct mtd_info *, size_t,
+					   size_t *, struct otp_info *);
 #endif
 static int cfi_intelext_suspend (struct mtd_info *);
 static void cfi_intelext_resume (struct mtd_info *);
@@ -435,10 +434,8 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary)
 	int i;
 
 	mtd = kzalloc(sizeof(*mtd), GFP_KERNEL);
-	if (!mtd) {
-		printk(KERN_ERR "Failed to allocate memory for MTD device\n");
+	if (!mtd)
 		return NULL;
-	}
 	mtd->priv = map;
 	mtd->type = MTD_NORFLASH;
 
@@ -564,10 +561,8 @@ static struct mtd_info *cfi_intelext_setup(struct mtd_info *mtd)
 	mtd->numeraseregions = cfi->cfiq->NumEraseRegions * cfi->numchips;
 	mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info)
 			* mtd->numeraseregions, GFP_KERNEL);
-	if (!mtd->eraseregions) {
-		printk(KERN_ERR "Failed to allocate memory for MTD erase region info\n");
+	if (!mtd->eraseregions)
 		goto setup_err;
-	}
 
 	for (i=0; i<cfi->cfiq->NumEraseRegions; i++) {
 		unsigned long ernum, ersize;
@@ -2399,24 +2394,19 @@ static int cfi_intelext_lock_user_prot_reg(struct mtd_info *mtd,
 				     NULL, do_otp_lock, 1);
 }
 
-static int cfi_intelext_get_fact_prot_info(struct mtd_info *mtd,
-					   struct otp_info *buf, size_t len)
-{
-	size_t retlen;
-	int ret;
+static int cfi_intelext_get_fact_prot_info(struct mtd_info *mtd, size_t len,
+					   size_t *retlen, struct otp_info *buf)
 
-	ret = cfi_intelext_otp_walk(mtd, 0, len, &retlen, (u_char *)buf, NULL, 0);
-	return ret ? : retlen;
+{
+	return cfi_intelext_otp_walk(mtd, 0, len, retlen, (u_char *)buf,
+				     NULL, 0);
 }
 
-static int cfi_intelext_get_user_prot_info(struct mtd_info *mtd,
-					   struct otp_info *buf, size_t len)
+static int cfi_intelext_get_user_prot_info(struct mtd_info *mtd, size_t len,
+					   size_t *retlen, struct otp_info *buf)
 {
-	size_t retlen;
-	int ret;
-
-	ret = cfi_intelext_otp_walk(mtd, 0, len, &retlen, (u_char *)buf, NULL, 1);
-	return ret ? : retlen;
+	return cfi_intelext_otp_walk(mtd, 0, len, retlen, (u_char *)buf,
+				     NULL, 1);
 }
 
 #endif

drivers/mtd/chips/cfi_cmdset_0002.c

@@ -24,7 +24,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/init.h>
 #include <asm/io.h>
 #include <asm/byteorder.h>
 
@@ -507,10 +506,8 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
 	int i;
 
 	mtd = kzalloc(sizeof(*mtd), GFP_KERNEL);
-	if (!mtd) {
-		printk(KERN_WARNING "Failed to allocate memory for MTD device\n");
+	if (!mtd)
 		return NULL;
-	}
 	mtd->priv = map;
 	mtd->type = MTD_NORFLASH;
 
@@ -661,10 +658,8 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd)
 	mtd->numeraseregions = cfi->cfiq->NumEraseRegions * cfi->numchips;
 	mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info)
 				    * mtd->numeraseregions, GFP_KERNEL);
-	if (!mtd->eraseregions) {
-		printk(KERN_WARNING "Failed to allocate memory for MTD erase region info\n");
+	if (!mtd->eraseregions)
 		goto setup_err;
-	}
 
 	for (i=0; i<cfi->cfiq->NumEraseRegions; i++) {
 		unsigned long ernum, ersize;

drivers/mtd/chips/cfi_cmdset_0020.c

@@ -22,7 +22,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/init.h>
 #include <asm/io.h>
 #include <asm/byteorder.h>
 
@@ -176,7 +175,6 @@ static struct mtd_info *cfi_staa_setup(struct map_info *map)
 	//printk(KERN_DEBUG "number of CFI chips: %d\n", cfi->numchips);
 
 	if (!mtd) {
-		printk(KERN_ERR "Failed to allocate memory for MTD device\n");
 		kfree(cfi->cmdset_priv);
 		return NULL;
 	}
@@ -189,7 +187,6 @@ static struct mtd_info *cfi_staa_setup(struct map_info *map)
 	mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info)
 			* mtd->numeraseregions, GFP_KERNEL);
 	if (!mtd->eraseregions) {
-		printk(KERN_ERR "Failed to allocate memory for MTD erase region info\n");
 		kfree(cfi->cmdset_priv);
 		kfree(mtd);
 		return NULL;

drivers/mtd/chips/cfi_probe.c

@@ -168,10 +168,8 @@ static int __xipram cfi_chip_setup(struct map_info *map,
 		return 0;
 
 	cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL);
-	if (!cfi->cfiq) {
-		printk(KERN_WARNING "%s: kmalloc failed for CFI ident structure\n", map->name);
+	if (!cfi->cfiq)
 		return 0;
-	}
 
 	memset(cfi->cfiq,0,sizeof(struct cfi_ident));
 

drivers/mtd/chips/cfi_util.c

@@ -116,10 +116,8 @@ __xipram cfi_read_pri(struct map_info *map, __u16 adr, __u16 size, const char* n
 	printk(KERN_INFO "%s Extended Query Table at 0x%4.4X\n", name, adr);
 
 	extp = kmalloc(size, GFP_KERNEL);
-	if (!extp) {
-		printk(KERN_ERR "Failed to allocate memory\n");
+	if (!extp)
 		goto out;
-	}
 
 #ifdef CONFIG_MTD_XIP
 	local_irq_disable();

drivers/mtd/chips/gen_probe.c

@@ -114,7 +114,6 @@ static struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chi
 	mapsize = sizeof(long) * DIV_ROUND_UP(max_chips, BITS_PER_LONG);
 	chip_map = kzalloc(mapsize, GFP_KERNEL);
 	if (!chip_map) {
-		printk(KERN_WARNING "%s: kmalloc failed for CFI chip map\n", map->name);
 		kfree(cfi.cfiq);
 		return NULL;
 	}
@@ -139,7 +138,6 @@ static struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chi
 	retcfi = kmalloc(sizeof(struct cfi_private) + cfi.numchips * sizeof(struct flchip), GFP_KERNEL);
 
 	if (!retcfi) {
-		printk(KERN_WARNING "%s: kmalloc failed for CFI private structure\n", map->name);
 		kfree(cfi.cfiq);
 		kfree(chip_map);
 		return NULL;

drivers/mtd/devices/Kconfig

@@ -210,6 +210,14 @@ config MTD_DOCG3
 	  M-Systems and now Sandisk. The support is very experimental,
 	  and doesn't give access to any write operations.
 
+config MTD_ST_SPI_FSM
+	tristate "ST Microelectronics SPI FSM Serial Flash Controller"
+	depends on ARM || SH
+	help
+	  This provides an MTD device driver for the ST Microelectronics
+	  SPI Fast Sequence Mode (FSM) Serial Flash Controller and support
+	  for a subset of connected Serial Flash devices.
+
 if MTD_DOCG3
 config BCH_CONST_M
 	default 14

drivers/mtd/devices/Makefile

@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_NAND_OMAP_BCH)	+= elm.o
 obj-$(CONFIG_MTD_SPEAR_SMI)	+= spear_smi.o
 obj-$(CONFIG_MTD_SST25L)	+= sst25l.o
 obj-$(CONFIG_MTD_BCM47XXSFLASH)	+= bcm47xxsflash.o
+obj-$(CONFIG_MTD_ST_SPI_FSM)    += st_spi_fsm.o
 
 
 CFLAGS_docg3.o			+= -I$(src)

drivers/mtd/devices/block2mtd.c

@@ -209,7 +209,6 @@ static void block2mtd_free_device(struct block2mtd_dev *dev)
 }
 
 
-/* FIXME: ensure that mtd->size % erase_size == 0 */
 static struct block2mtd_dev *add_device(char *devname, int erase_size)
 {
 	const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
@@ -240,13 +239,18 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
 
 	if (IS_ERR(bdev)) {
 		pr_err("error: cannot open device %s\n", devname);
-		goto devinit_err;
+		goto err_free_block2mtd;
 	}
 	dev->blkdev = bdev;
 
 	if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
 		pr_err("attempting to use an MTD device as a block device\n");
-		goto devinit_err;
+		goto err_free_block2mtd;
+	}
+
+	if ((long)dev->blkdev->bd_inode->i_size % erase_size) {
+		pr_err("erasesize must be a divisor of device size\n");
+		goto err_free_block2mtd;
 	}
 
 	mutex_init(&dev->write_mutex);
@@ -255,7 +259,7 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
 	/* make the name contain the block device in */
 	name = kasprintf(GFP_KERNEL, "block2mtd: %s", devname);
 	if (!name)
-		goto devinit_err;
+		goto err_destroy_mutex;
 
 	dev->mtd.name = name;
 
@@ -274,7 +278,7 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
 
 	if (mtd_device_register(&dev->mtd, NULL, 0)) {
 		/* Device didn't get added, so free the entry */
-		goto devinit_err;
+		goto err_destroy_mutex;
 	}
 	list_add(&dev->list, &blkmtd_device_list);
 	pr_info("mtd%d: [%s] erase_size = %dKiB [%d]\n",
@@ -283,7 +287,9 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
 		dev->mtd.erasesize >> 10, dev->mtd.erasesize);
 	return dev;
 
-devinit_err:
+err_destroy_mutex:
+	mutex_destroy(&dev->write_mutex);
+err_free_block2mtd:
 	block2mtd_free_device(dev);
 	return NULL;
 }
@@ -448,6 +454,7 @@ static void block2mtd_exit(void)
 		struct block2mtd_dev *dev = list_entry(pos, typeof(*dev), list);
 		block2mtd_sync(&dev->mtd);
 		mtd_device_unregister(&dev->mtd);
+		mutex_destroy(&dev->write_mutex);
 		pr_info("mtd%d: [%s] removed\n",
 			dev->mtd.index,
 			dev->mtd.name + strlen("block2mtd: "));