Backmerge tag 'v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/torvalds/linux into drm-next

Linux 6.4-rc7

Need this to pull in the msm work.

Signed-off-by: Dave Airlie <[email protected]>

.mailmap

@@ -233,6 +233,7 @@ Jisheng Zhang <[email protected]> <[email protected]>
 Johan Hovold <[email protected]> <[email protected]>
 Johan Hovold <[email protected]> <[email protected]>
 John Crispin <[email protected]> <[email protected]>
+John Keeping <[email protected]> <[email protected]>
 John Paul Adrian Glaubitz <[email protected]>
 John Stultz <[email protected]>
 <[email protected]> <[email protected]>
@@ -365,6 +366,11 @@ Nicolas Pitre <[email protected]> <[email protected]>
 Nicolas Saenz Julienne <[email protected]> <[email protected]>
 Nicolas Saenz Julienne <[email protected]> <[email protected]>
 Niklas Söderlund <[email protected]>
+Nikolay Aleksandrov <[email protected]> <[email protected]>
+Nikolay Aleksandrov <[email protected]> <[email protected]>
+Nikolay Aleksandrov <[email protected]> <[email protected]>
+Nikolay Aleksandrov <[email protected]> <[email protected]>
+Nikolay Aleksandrov <[email protected]> <[email protected]>
 Oleksandr Natalenko <[email protected]> <[email protected]>
 Oleksij Rempel <[email protected]> <[email protected]>
 Oleksij Rempel <[email protected]> <[email protected]>

CREDITS

@@ -1706,6 +1706,10 @@ S: Panoramastrasse 18
 S: D-69126 Heidelberg
 S: Germany
 
+N: Neil Horman
+M: [email protected]
+D: SCTP protocol maintainer.
+
 N: Simon Horman
 M: [email protected]
 D: Renesas ARM/ARM64 SoC maintainer

Documentation/admin-guide/cgroup-v2.rst

@@ -1213,23 +1213,25 @@ PAGE_SIZE multiple when read back.
 	A read-write single value file which exists on non-root
 	cgroups.  The default is "max".
 
-	Memory usage throttle limit.  This is the main mechanism to
-	control memory usage of a cgroup.  If a cgroup's usage goes
+	Memory usage throttle limit.  If a cgroup's usage goes
 	over the high boundary, the processes of the cgroup are
 	throttled and put under heavy reclaim pressure.
 
 	Going over the high limit never invokes the OOM killer and
-	under extreme conditions the limit may be breached.
+	under extreme conditions the limit may be breached. The high
+	limit should be used in scenarios where an external process
+	monitors the limited cgroup to alleviate heavy reclaim
+	pressure.
 
   memory.max
 	A read-write single value file which exists on non-root
 	cgroups.  The default is "max".
 
-	Memory usage hard limit.  This is the final protection
-	mechanism.  If a cgroup's memory usage reaches this limit and
-	can't be reduced, the OOM killer is invoked in the cgroup.
-	Under certain circumstances, the usage may go over the limit
-	temporarily.
+	Memory usage hard limit.  This is the main mechanism to limit
+	memory usage of a cgroup.  If a cgroup's memory usage reaches
+	this limit and can't be reduced, the OOM killer is invoked in
+	the cgroup. Under certain circumstances, the usage may go
+	over the limit temporarily.
 
 	In default configuration regular 0-order allocations always
 	succeed unless OOM killer chooses current task as a victim.
@@ -1238,10 +1240,6 @@ PAGE_SIZE multiple when read back.
 	Caller could retry them differently, return into userspace
 	as -ENOMEM or silently ignore in cases like disk readahead.
 
-	This is the ultimate protection mechanism.  As long as the
-	high limit is used and monitored properly, this limit's
-	utility is limited to providing the final safety net.
-
   memory.reclaim
 	A write-only nested-keyed file which exists for all cgroups.
 

Documentation/admin-guide/cifs/changes.rst

@@ -5,5 +5,5 @@ Changes
 See https://wiki.samba.org/index.php/LinuxCIFSKernel for summary
 information about fixes/improvements to CIFS/SMB2/SMB3 support (changes
 to cifs.ko module) by kernel version (and cifs internal module version).
-This may be easier to read than parsing the output of "git log fs/cifs"
-by release.
+This may be easier to read than parsing the output of
+"git log fs/smb/client" by release.

Documentation/admin-guide/cifs/usage.rst

@@ -45,7 +45,7 @@ Installation instructions
 
 If you have built the CIFS vfs as module (successfully) simply
 type ``make modules_install`` (or if you prefer, manually copy the file to
-the modules directory e.g. /lib/modules/2.4.10-4GB/kernel/fs/cifs/cifs.ko).
+the modules directory e.g. /lib/modules/6.3.0-060300-generic/kernel/fs/smb/client/cifs.ko).
 
 If you have built the CIFS vfs into the kernel itself, follow the instructions
 for your distribution on how to install a new kernel (usually you
@@ -66,15 +66,15 @@ If cifs is built as a module, then the size and number of network buffers
 and maximum number of simultaneous requests to one server can be configured.
 Changing these from their defaults is not recommended. By executing modinfo::
 
-	modinfo kernel/fs/cifs/cifs.ko
+	modinfo <path to cifs.ko>
 
-on kernel/fs/cifs/cifs.ko the list of configuration changes that can be made
+on kernel/fs/smb/client/cifs.ko the list of configuration changes that can be made
 at module initialization time (by running insmod cifs.ko) can be seen.
 
 Recommendations
 ===============
 
-To improve security the SMB2.1 dialect or later (usually will get SMB3) is now
+To improve security the SMB2.1 dialect or later (usually will get SMB3.1.1) is now
 the new default. To use old dialects (e.g. to mount Windows XP) use "vers=1.0"
 on mount (or vers=2.0 for Windows Vista).  Note that the CIFS (vers=1.0) is
 much older and less secure than the default dialect SMB3 which includes

Documentation/admin-guide/quickly-build-trimmed-linux.rst

@@ -215,12 +215,14 @@ again.
    reduce the compile time enormously, especially if you are running an
    universal kernel from a commodity Linux distribution.
 
-   There is a catch: the make target 'localmodconfig' will disable kernel
-   features you have not directly or indirectly through some program utilized
-   since you booted the system. You can reduce or nearly eliminate that risk by
-   using tricks outlined in the reference section; for quick testing purposes
-   that risk is often negligible, but it is an aspect you want to keep in mind
-   in case your kernel behaves oddly.
+   There is a catch: 'localmodconfig' is likely to disable kernel features you
+   did not use since you booted your Linux -- like drivers for currently
+   disconnected peripherals or a virtualization software not haven't used yet.
+   You can reduce or nearly eliminate that risk with tricks the reference
+   section outlines; but when building a kernel just for quick testing purposes
+   it is often negligible if such features are missing. But you should keep that
+   aspect in mind when using a kernel built with this make target, as it might
+   be the reason why something you only use occasionally stopped working.
 
    [:ref:`details<configuration>`]
 
@@ -271,6 +273,9 @@ again.
    does nothing at all; in that case you have to manually install your kernel,
    as outlined in the reference section.
 
+   If you are running a immutable Linux distribution, check its documentation
+   and the web to find out how to install your own kernel there.
+
    [:ref:`details<install>`]
 
 .. _another_sbs:
@@ -291,29 +296,29 @@ again.
    version you care about, as git otherwise might retrieve the entire commit
    history::
 
-     git fetch --shallow-exclude=v6.1 origin
-
-   If you modified the sources (for example by applying a patch), you now need
-   to discard those modifications; that's because git otherwise will not be able
-   to switch to the sources of another version due to potential conflicting
-   changes::
-
-     git reset --hard
+     git fetch --shallow-exclude=v6.0 origin
 
-   Now checkout the version you are interested in, as explained above::
+   Now switch to the version you are interested in -- but be aware the command
+   used here will discard any modifications you performed, as they would
+   conflict with the sources you want to checkout::
 
-     git checkout --detach origin/master
+     git checkout --force --detach origin/master
 
    At this point you might want to patch the sources again or set/modify a build
-   tag, as explained earlier; afterwards adjust the build configuration to the
-   new codebase and build your next kernel::
+   tag, as explained earlier. Afterwards adjust the build configuration to the
+   new codebase using olddefconfig, which will now adjust the configuration file
+   you prepared earlier using localmodconfig  (~/linux/.config) for your next
+   kernel::
 
      # reminder: if you want to apply patches, do it at this point
      # reminder: you might want to update your build tag at this point
      make olddefconfig
+
+   Now build your kernel::
+
      make -j $(nproc --all)
 
-   Install the kernel as outlined above::
+   Afterwards install the kernel as outlined above::
 
      command -v installkernel && sudo make modules_install install
 
@@ -584,11 +589,11 @@ versions and individual commits at hand at any time::
     curl -L \
       https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/clone.bundle \
       -o linux-stable.git.bundle
-    git clone clone.bundle ~/linux/
+    git clone linux-stable.git.bundle ~/linux/
     rm linux-stable.git.bundle
     cd ~/linux/
-    git remote set-url origin
-    https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
+    git remote set-url origin \
+      https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
     git fetch origin
     git checkout --detach origin/master
 

Documentation/cdrom/index.rst

@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-=====
-cdrom
-=====
+======
+CD-ROM
+======
 
 .. toctree::
     :maxdepth: 1

Documentation/devicetree/bindings/ata/ahci-common.yaml

@@ -8,7 +8,7 @@ title: Common Properties for Serial ATA AHCI controllers
 
 maintainers:
   - Hans de Goede <[email protected]>
-  - Damien Le Moal <[email protected]>
+  - Damien Le Moal <[email protected]>
 
 description:
   This document defines device tree properties for a common AHCI SATA

Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml

@@ -32,7 +32,7 @@ properties:
     maxItems: 1
 
   iommus:
-    maxItems: 1
+    maxItems: 4
 
   power-domains:
     maxItems: 1

Documentation/devicetree/bindings/cache/qcom,llcc.yaml

@@ -129,6 +129,7 @@ allOf:
               - qcom,sm8250-llcc
               - qcom,sm8350-llcc
               - qcom,sm8450-llcc
+              - qcom,sm8550-llcc
     then:
       properties:
         reg:

Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Canaan Kendryte K210 Clock
 
 maintainers:
-  - Damien Le Moal <[email protected]>
+  - Damien Le Moal <[email protected]>
 
 description: |
   Canaan Kendryte K210 SoC clocks driver bindings. The clock

Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml

@@ -82,6 +82,18 @@ properties:
       Indicates if the DSI controller is driving a panel which needs
       2 DSI links.
 
+  qcom,master-dsi:
+    type: boolean
+    description: |
+      Indicates if the DSI controller is the master DSI controller when
+      qcom,dual-dsi-mode enabled.
+
+  qcom,sync-dual-dsi:
+    type: boolean
+    description: |
+      Indicates if the DSI controller needs to sync the other DSI controller
+      with MIPI DCS commands when qcom,dual-dsi-mode enabled.
+
   assigned-clocks:
     minItems: 2
     maxItems: 4

Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Lattice Slave SPI sysCONFIG FPGA manager
 
 maintainers:
-  - Ivan Bornyakov <i.bornyakov@metrotek.ru>
+  - Vladimir Georgiev <v.georgiev@metrotek.ru>
 
 description: |
   Lattice sysCONFIG port, which is used for FPGA configuration, among others,

Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Microchip Polarfire FPGA manager.
 
 maintainers:
-  - Ivan Bornyakov <i.bornyakov@metrotek.ru>
+  - Vladimir Georgiev <v.georgiev@metrotek.ru>
 
 description:
   Device Tree Bindings for Microchip Polarfire FPGA Manager using slave SPI to

Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml

@@ -44,7 +44,7 @@ required:
   - clock-names
   - clocks
 
-additionalProperties: true
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml

@@ -39,6 +39,12 @@ properties:
   power-domains:
     maxItems: 1
 
+  vref-supply:
+    description: |
+      External ADC reference voltage supply on VREFH pad. If VERID[MVI] is
+      set, there are additional, internal reference voltages selectable.
+      VREFH1 is always from VREFH pad.
+
   "#io-channel-cells":
     const: 1
 
@@ -72,6 +78,7 @@ examples:
             assigned-clocks = <&clk IMX_SC_R_ADC_0>;
             assigned-clock-rates = <24000000>;
             power-domains = <&pd IMX_SC_R_ADC_0>;
+            vref-supply = <&reg_1v8>;
             #io-channel-cells = <1>;
         };
     };

Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml

@@ -90,7 +90,7 @@ patternProperties:
             of the MAX chips to the GyroADC, while MISO line of each Maxim
             ADC connects to a shared input pin of the GyroADC.
         enum:
-          - adi,7476
+          - adi,ad7476
           - fujitsu,mb88101a
           - maxim,max1162
           - maxim,max11100

Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml

@@ -166,6 +166,12 @@ properties:
   resets:
     maxItems: 1
 
+  mediatek,broken-save-restore-fw:
+    type: boolean
+    description:
+      Asserts that the firmware on this device has issues saving and restoring
+      GICR registers when the GIC redistributors are powered off.
+
 dependencies:
   mbi-ranges: [ msi-controller ]
   msi-controller: [ mbi-ranges ]

Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Canaan Kendryte K210 System Controller
 
 maintainers:
-  - Damien Le Moal <[email protected]>
+  - Damien Le Moal <[email protected]>
 
 description:
   Canaan Inc. Kendryte K210 SoC system controller which provides a

Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml

@@ -21,11 +21,22 @@ properties:
 
   st,can-primary:
     description:
-      Primary and secondary mode of the bxCAN peripheral is only relevant
-      if the chip has two CAN peripherals. In that case they share some
-      of the required logic.
+      Primary mode of the bxCAN peripheral is only relevant if the chip has
+      two CAN peripherals in dual CAN configuration. In that case they share
+      some of the required logic.
+      Not to be used if the peripheral is in single CAN configuration.
       To avoid misunderstandings, it should be noted that ST documentation
-      uses the terms master/slave instead of primary/secondary.
+      uses the terms master instead of primary.
+    type: boolean
+
+  st,can-secondary:
+    description:
+      Secondary mode of the bxCAN peripheral is only relevant if the chip
+      has two CAN peripherals in dual CAN configuration. In that case they
+      share some of the required logic.
+      Not to be used if the peripheral is in single CAN configuration.
+      To avoid misunderstandings, it should be noted that ST documentation
+      uses the terms slave instead of secondary.
     type: boolean
 
   reg:

Documentation/devicetree/bindings/net/realtek-bluetooth.yaml

@@ -11,7 +11,7 @@ maintainers:
   - Alistair Francis <[email protected]>
 
 description:
-  RTL8723CS/RTL8723CS/RTL8821CS/RTL8822CS is a WiFi + BT chip. WiFi part
+  RTL8723BS/RTL8723CS/RTL8821CS/RTL8822CS is a WiFi + BT chip. WiFi part
   is connected over SDIO, while BT is connected over serial. It speaks
   H5 protocol with few extra commands to upload firmware and change
   module speed.
@@ -27,7 +27,7 @@ properties:
       - items:
           - enum:
               - realtek,rtl8821cs-bt
-          - const: realtek,rtl8822cs-bt
+          - const: realtek,rtl8723bs-bt
 
   device-wake-gpios:
     maxItems: 1

Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Canaan Kendryte K210 FPIOA
 
 maintainers:
-  - Damien Le Moal <[email protected]>
+  - Damien Le Moal <[email protected]>
 
 description:
   The Canaan Kendryte K210 SoC Fully Programmable IO Array (FPIOA)