KVM: SEV: Enable data breakpoints in SEV-ES

Add support for "DebugSwap for SEV-ES guests", which provides support
for swapping DR[0-3] and DR[0-3]_ADDR_MASK on VMRUN and VMEXIT, i.e.
allows KVM to expose debug capabilities to SEV-ES guests. Without
DebugSwap support, the CPU doesn't save/load most _guest_ debug
registers (except DR6/7), and KVM cannot manually context switch guest
DRs due the VMSA being encrypted.

Enable DebugSwap if and only if the CPU also supports NoNestedDataBp,
which causes the CPU to ignore nested #DBs, i.e. #DBs that occur when
vectoring a #DB.  Without NoNestedDataBp, a malicious guest can DoS
the host by putting the CPU into an infinite loop of vectoring #DBs
(see https://bugzilla.redhat.com/show_bug.cgi?id=1278496)

Set the features bit in sev_es_sync_vmsa() which is the last point
when VMSA is not encrypted yet as sev_(es_)init_vmcb() (where the most
init happens) is called not only when VCPU is initialised but also on
intrahost migration when VMSA is encrypted.

Eliminate DR7 intercepts as KVM can't modify guest DR7, and intercepting
DR7 would completely defeat the purpose of enabling DebugSwap.

Make X86_FEATURE_DEBUG_SWAP appear in /proc/cpuinfo (by not adding "") to
let the operator know if the VM can debug.

Signed-off-by: Alexey Kardashevskiy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>

arch/x86/include/asm/cpufeatures.h

@@ -434,6 +434,7 @@
 #define X86_FEATURE_SEV_ES		(19*32+ 3) /* AMD Secure Encrypted Virtualization - Encrypted State */
 #define X86_FEATURE_V_TSC_AUX		(19*32+ 9) /* "" Virtual TSC_AUX */
 #define X86_FEATURE_SME_COHERENT	(19*32+10) /* "" AMD hardware-enforced cache coherency */
+#define X86_FEATURE_DEBUG_SWAP		(19*32+14) /* AMD SEV-ES full debug state swap support */
 
 /* AMD-defined Extended Feature 2 EAX, CPUID level 0x80000021 (EAX), word 20 */
 #define X86_FEATURE_NO_NESTED_DATA_BP	(20*32+ 0) /* "" No Nested Data Breakpoints */

arch/x86/include/asm/svm.h

@@ -288,6 +288,7 @@ static_assert((X2AVIC_MAX_PHYSICAL_ID & AVIC_PHYSICAL_MAX_INDEX_MASK) == X2AVIC_
 
 #define AVIC_HPA_MASK	~((0xFFFULL << 52) | 0xFFF)
 
+#define SVM_SEV_FEAT_DEBUG_SWAP                        BIT(5)
 
 struct vmcb_seg {
 	u16 selector;

arch/x86/kvm/svm/sev.c

@@ -23,6 +23,7 @@
 #include <asm/pkru.h>
 #include <asm/trapnr.h>
 #include <asm/fpu/xcr.h>
+#include <asm/debugreg.h>
 
 #include "mmu.h"
 #include "x86.h"
@@ -54,9 +55,14 @@ module_param_named(sev, sev_enabled, bool, 0444);
 /* enable/disable SEV-ES support */
 static bool sev_es_enabled = true;
 module_param_named(sev_es, sev_es_enabled, bool, 0444);
+
+/* enable/disable SEV-ES DebugSwap support */
+static bool sev_es_debug_swap_enabled = true;
+module_param_named(debug_swap, sev_es_debug_swap_enabled, bool, 0444);
 #else
 #define sev_enabled false
 #define sev_es_enabled false
+#define sev_es_debug_swap_enabled false
 #endif /* CONFIG_KVM_AMD_SEV */
 
 static u8 sev_enc_bit;
@@ -606,6 +612,9 @@ static int sev_es_sync_vmsa(struct vcpu_svm *svm)
 	save->xss  = svm->vcpu.arch.ia32_xss;
 	save->dr6  = svm->vcpu.arch.dr6;
 
+	if (sev_es_debug_swap_enabled)
+		save->sev_features |= SVM_SEV_FEAT_DEBUG_SWAP;
+
 	pr_debug("Virtual Machine Save Area (VMSA):\n");
 	print_hex_dump_debug("", DUMP_PREFIX_NONE, 16, 1, save, sizeof(*save), false);
 
@@ -2261,6 +2270,9 @@ void __init sev_hardware_setup(void)
 
 	sev_enabled = sev_supported;
 	sev_es_enabled = sev_es_supported;
+	if (!sev_es_enabled || !cpu_feature_enabled(X86_FEATURE_DEBUG_SWAP) ||
+	    !cpu_feature_enabled(X86_FEATURE_NO_NESTED_DATA_BP))
+		sev_es_debug_swap_enabled = false;
 #endif
 }
 
@@ -2981,9 +2993,11 @@ static void sev_es_init_vmcb(struct vcpu_svm *svm)
 	svm_set_intercept(svm, TRAP_CR8_WRITE);
 
 	vmcb->control.intercepts[INTERCEPT_DR] = 0;
-	vmcb_set_intercept(&vmcb->control, INTERCEPT_DR7_READ);
-	vmcb_set_intercept(&vmcb->control, INTERCEPT_DR7_WRITE);
-	recalc_intercepts(svm);
+	if (!sev_es_debug_swap_enabled) {
+		vmcb_set_intercept(&vmcb->control, INTERCEPT_DR7_READ);
+		vmcb_set_intercept(&vmcb->control, INTERCEPT_DR7_WRITE);
+		recalc_intercepts(svm);
+	}
 
 	/* Can't intercept XSETBV, HV can't modify XCR0 directly */
 	svm_clr_intercept(svm, INTERCEPT_XSETBV);
@@ -3053,6 +3067,22 @@ void sev_es_prepare_switch_to_guest(struct sev_es_save_area *hostsa)
 	hostsa->xcr0 = xgetbv(XCR_XFEATURE_ENABLED_MASK);
 	hostsa->pkru = read_pkru();
 	hostsa->xss = host_xss;
+
+	/*
+	 * If DebugSwap is enabled, debug registers are loaded but NOT saved by
+	 * the CPU (Type-B). If DebugSwap is disabled/unsupported, the CPU both
+	 * saves and loads debug registers (Type-A).
+	 */
+	if (sev_es_debug_swap_enabled) {
+		hostsa->dr0 = native_get_debugreg(0);
+		hostsa->dr1 = native_get_debugreg(1);
+		hostsa->dr2 = native_get_debugreg(2);
+		hostsa->dr3 = native_get_debugreg(3);
+		hostsa->dr0_addr_mask = amd_get_dr_addr_mask(0);
+		hostsa->dr1_addr_mask = amd_get_dr_addr_mask(1);
+		hostsa->dr2_addr_mask = amd_get_dr_addr_mask(2);
+		hostsa->dr3_addr_mask = amd_get_dr_addr_mask(3);
+	}
 }
 
 void sev_vcpu_deliver_sipi_vector(struct kvm_vcpu *vcpu, u8 vector)

tools/arch/x86/include/asm/cpufeatures.h

@@ -434,6 +434,7 @@
 #define X86_FEATURE_SEV_ES		(19*32+ 3) /* AMD Secure Encrypted Virtualization - Encrypted State */
 #define X86_FEATURE_V_TSC_AUX		(19*32+ 9) /* "" Virtual TSC_AUX */
 #define X86_FEATURE_SME_COHERENT	(19*32+10) /* "" AMD hardware-enforced cache coherency */
+#define X86_FEATURE_DEBUG_SWAP		(19*32+14) /* AMD SEV-ES full debug state swap support */
 
 /* AMD-defined Extended Feature 2 EAX, CPUID level 0x80000021 (EAX), word 20 */
 #define X86_FEATURE_NO_NESTED_DATA_BP	(20*32+ 0) /* "" No Nested Data Breakpoints */