Skip to content

Commit

Permalink
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel…
Browse files Browse the repository at this point in the history
…/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
 "A collection of fixes from the last few weeks. Most of them are
  smaller tweaks and fixes to DT and hardware descriptions for boards.
  Some of the more significant ones are:

   - eMMC and RGMII stability tweaks for rk3288

   - DDC fixes for Rock PI 4

   - Audio fixes for two TI am335x eval boards

   - D_CAN clock fix for am335x

   - Compilation fixes for clang

   - !HOTPLUG_CPU compilation fix for one of the new platforms this
     release (milbeaut)

   - A revert of a gpio fix for nomadik that instead was fixed in the
     gpio subsystem

   - Whitespace fix for the DT JSON schema (no tabs allowed)"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
  ARM: milbeaut: fix build with !CONFIG_HOTPLUG_CPU
  ARM: iop: don't use using 64-bit DMA masks
  ARM: orion: don't use using 64-bit DMA masks
  Revert "ARM: dts: nomadik: Fix polarity of SPI CS"
  dt-bindings: cpu: Fix JSON schema
  arm/mach-at91/pm : fix possible object reference leak
  ARM: dts: at91: Fix typo in ISC_D0 on PC9
  ARM: dts: Fix dcan clkctrl clock for am3
  reset: meson-audio-arb: Fix missing .owner setting of reset_controller_dev
  dt-bindings: reset: meson-g12a: Add missing USB2 PHY resets
  ARM: dts: rockchip: Remove #address/#size-cells from rk3288-veyron gpio-keys
  ARM: dts: rockchip: Remove #address/#size-cells from rk3288 mipi_dsi
  ARM: dts: rockchip: Fix gpu opp node names for rk3288
  ARM: dts: am335x-evmsk: Correct the regulators for the audio codec
  ARM: dts: am335x-evm: Correct the regulators for the audio codec
  ARM: OMAP2+: add missing of_node_put after of_device_is_available
  ARM: OMAP1: ams-delta: Fix broken GPIO ID allocation
  arm64: dts: stratix10: add the sysmgr-syscon property from the gmac's
  arm64: dts: rockchip: fix rk3328 sdmmc0 write errors
  arm64: dts: rockchip: fix rk3328 rgmii high tx error rate
  ...
  • Loading branch information
torvalds committed Apr 7, 2019
2 parents 429fba1 + 9a8f320 commit d849122
Show file tree
Hide file tree
Showing 24 changed files with 131 additions and 82 deletions.
2 changes: 1 addition & 1 deletion Documentation/devicetree/bindings/arm/cpus.yaml
Original file line number Diff line number Diff line change
Expand Up @@ -228,7 +228,7 @@ patternProperties:
- renesas,r9a06g032-smp
- rockchip,rk3036-smp
- rockchip,rk3066-smp
- socionext,milbeaut-m10v-smp
- socionext,milbeaut-m10v-smp
- ste,dbx500-smp

cpu-release-addr:
Expand Down
26 changes: 22 additions & 4 deletions arch/arm/boot/dts/am335x-evm.dts
Original file line number Diff line number Diff line change
Expand Up @@ -57,6 +57,24 @@
enable-active-high;
};

/* TPS79501 */
v1_8d_reg: fixedregulator-v1_8d {
compatible = "regulator-fixed";
regulator-name = "v1_8d";
vin-supply = <&vbat>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};

/* TPS79501 */
v3_3d_reg: fixedregulator-v3_3d {
compatible = "regulator-fixed";
regulator-name = "v3_3d";
vin-supply = <&vbat>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};

matrix_keypad: matrix_keypad0 {
compatible = "gpio-matrix-keypad";
debounce-delay-ms = <5>;
Expand Down Expand Up @@ -499,10 +517,10 @@
status = "okay";

/* Regulators */
AVDD-supply = <&vaux2_reg>;
IOVDD-supply = <&vaux2_reg>;
DRVDD-supply = <&vaux2_reg>;
DVDD-supply = <&vbat>;
AVDD-supply = <&v3_3d_reg>;
IOVDD-supply = <&v3_3d_reg>;
DRVDD-supply = <&v3_3d_reg>;
DVDD-supply = <&v1_8d_reg>;
};
};

Expand Down
26 changes: 22 additions & 4 deletions arch/arm/boot/dts/am335x-evmsk.dts
Original file line number Diff line number Diff line change
Expand Up @@ -73,6 +73,24 @@
enable-active-high;
};

/* TPS79518 */
v1_8d_reg: fixedregulator-v1_8d {
compatible = "regulator-fixed";
regulator-name = "v1_8d";
vin-supply = <&vbat>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};

/* TPS78633 */
v3_3d_reg: fixedregulator-v3_3d {
compatible = "regulator-fixed";
regulator-name = "v3_3d";
vin-supply = <&vbat>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};

leds {
pinctrl-names = "default";
pinctrl-0 = <&user_leds_s0>;
Expand Down Expand Up @@ -501,10 +519,10 @@
status = "okay";

/* Regulators */
AVDD-supply = <&vaux2_reg>;
IOVDD-supply = <&vaux2_reg>;
DRVDD-supply = <&vaux2_reg>;
DVDD-supply = <&vbat>;
AVDD-supply = <&v3_3d_reg>;
IOVDD-supply = <&v3_3d_reg>;
DRVDD-supply = <&v3_3d_reg>;
DVDD-supply = <&v1_8d_reg>;
};
};

Expand Down
4 changes: 2 additions & 2 deletions arch/arm/boot/dts/am33xx-l4.dtsi
Original file line number Diff line number Diff line change
Expand Up @@ -1762,7 +1762,7 @@
reg = <0xcc000 0x4>;
reg-names = "rev";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM3_D_CAN0_CLKCTRL 0>;
clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
Expand All @@ -1785,7 +1785,7 @@
reg = <0xd0000 0x4>;
reg-names = "rev";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM3_D_CAN1_CLKCTRL 0>;
clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
Expand Down
3 changes: 2 additions & 1 deletion arch/arm/boot/dts/rk3288-tinker.dtsi
Original file line number Diff line number Diff line change
Expand Up @@ -254,6 +254,7 @@
};

vccio_sd: LDO_REG5 {
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_sd";
Expand Down Expand Up @@ -430,7 +431,7 @@
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
card-detect-delay = <200>;
broken-cd;
disable-wp; /* wp not hooked up */
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
Expand Down
2 changes: 0 additions & 2 deletions arch/arm/boot/dts/rk3288-veyron.dtsi
Original file line number Diff line number Diff line change
Expand Up @@ -25,8 +25,6 @@

gpio_keys: gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;

pinctrl-names = "default";
pinctrl-0 = <&pwr_key_l>;
Expand Down
20 changes: 9 additions & 11 deletions arch/arm/boot/dts/rk3288.dtsi
Original file line number Diff line number Diff line change
Expand Up @@ -70,7 +70,7 @@
compatible = "arm,cortex-a12";
reg = <0x501>;
resets = <&cru SRST_CORE1>;
operating-points = <&cpu_opp_table>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>; /* min followed by max */
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
Expand All @@ -80,7 +80,7 @@
compatible = "arm,cortex-a12";
reg = <0x502>;
resets = <&cru SRST_CORE2>;
operating-points = <&cpu_opp_table>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>; /* min followed by max */
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
Expand All @@ -90,7 +90,7 @@
compatible = "arm,cortex-a12";
reg = <0x503>;
resets = <&cru SRST_CORE3>;
operating-points = <&cpu_opp_table>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>; /* min followed by max */
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
Expand Down Expand Up @@ -1119,8 +1119,6 @@
clock-names = "ref", "pclk";
power-domains = <&power RK3288_PD_VIO>;
rockchip,grf = <&grf>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";

ports {
Expand Down Expand Up @@ -1282,27 +1280,27 @@
gpu_opp_table: gpu-opp-table {
compatible = "operating-points-v2";

opp@100000000 {
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <950000>;
};
opp@200000000 {
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <950000>;
};
opp@300000000 {
opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-microvolt = <1000000>;
};
opp@400000000 {
opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1100000>;
};
opp@500000000 {
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <1200000>;
};
opp@600000000 {
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <1250000>;
};
Expand Down
2 changes: 1 addition & 1 deletion arch/arm/boot/dts/sama5d2-pinfunc.h
Original file line number Diff line number Diff line change
Expand Up @@ -518,7 +518,7 @@
#define PIN_PC9__GPIO PINMUX_PIN(PIN_PC9, 0, 0)
#define PIN_PC9__FIQ PINMUX_PIN(PIN_PC9, 1, 3)
#define PIN_PC9__GTSUCOMP PINMUX_PIN(PIN_PC9, 2, 1)
#define PIN_PC9__ISC_D0 PINMUX_PIN(PIN_PC9, 2, 1)
#define PIN_PC9__ISC_D0 PINMUX_PIN(PIN_PC9, 3, 1)
#define PIN_PC9__TIOA4 PINMUX_PIN(PIN_PC9, 4, 2)
#define PIN_PC10 74
#define PIN_PC10__GPIO PINMUX_PIN(PIN_PC10, 0, 0)
Expand Down
9 changes: 4 additions & 5 deletions arch/arm/boot/dts/ste-nomadik-nhk15.dts
Original file line number Diff line number Diff line change
Expand Up @@ -213,13 +213,12 @@
gpio-sck = <&gpio0 5 GPIO_ACTIVE_HIGH>;
gpio-mosi = <&gpio0 4 GPIO_ACTIVE_HIGH>;
/*
* This chipselect is active high. Just setting the flags
* to GPIO_ACTIVE_HIGH is not enough for the SPI DT bindings,
* it will be ignored, only the special "spi-cs-high" flag
* really counts.
* It's not actually active high, but the frameworks assume
* the polarity of the passed-in GPIO is "normal" (active
* high) then actively drives the line low to select the
* chip.
*/
cs-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
spi-cs-high;
num-chipselects = <1>;

/*
Expand Down
6 changes: 4 additions & 2 deletions arch/arm/mach-at91/pm.c
Original file line number Diff line number Diff line change
Expand Up @@ -591,13 +591,13 @@ static int __init at91_pm_backup_init(void)

np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam");
if (!np)
goto securam_fail;
goto securam_fail_no_ref_dev;

pdev = of_find_device_by_node(np);
of_node_put(np);
if (!pdev) {
pr_warn("%s: failed to find securam device!\n", __func__);
goto securam_fail;
goto securam_fail_no_ref_dev;
}

sram_pool = gen_pool_get(&pdev->dev, NULL);
Expand All @@ -620,6 +620,8 @@ static int __init at91_pm_backup_init(void)
return 0;

securam_fail:
put_device(&pdev->dev);
securam_fail_no_ref_dev:
iounmap(pm_data.sfrbu);
pm_data.sfrbu = NULL;
return ret;
Expand Down
8 changes: 4 additions & 4 deletions arch/arm/mach-iop13xx/setup.c
Original file line number Diff line number Diff line change
Expand Up @@ -300,7 +300,7 @@ static struct resource iop13xx_adma_2_resources[] = {
}
};

static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64);
static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(32);
static struct iop_adma_platform_data iop13xx_adma_0_data = {
.hw_id = 0,
.pool_size = PAGE_SIZE,
Expand All @@ -324,7 +324,7 @@ static struct platform_device iop13xx_adma_0_channel = {
.resource = iop13xx_adma_0_resources,
.dev = {
.dma_mask = &iop13xx_adma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = (void *) &iop13xx_adma_0_data,
},
};
Expand All @@ -336,7 +336,7 @@ static struct platform_device iop13xx_adma_1_channel = {
.resource = iop13xx_adma_1_resources,
.dev = {
.dma_mask = &iop13xx_adma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = (void *) &iop13xx_adma_1_data,
},
};
Expand All @@ -348,7 +348,7 @@ static struct platform_device iop13xx_adma_2_channel = {
.resource = iop13xx_adma_2_resources,
.dev = {
.dma_mask = &iop13xx_adma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = (void *) &iop13xx_adma_2_data,
},
};
Expand Down
10 changes: 5 additions & 5 deletions arch/arm/mach-iop13xx/tpmi.c
Original file line number Diff line number Diff line change
Expand Up @@ -152,15 +152,15 @@ static struct resource iop13xx_tpmi_3_resources[] = {
}
};

u64 iop13xx_tpmi_mask = DMA_BIT_MASK(64);
u64 iop13xx_tpmi_mask = DMA_BIT_MASK(32);
static struct platform_device iop13xx_tpmi_0_device = {
.name = "iop-tpmi",
.id = 0,
.num_resources = ARRAY_SIZE(iop13xx_tpmi_0_resources),
.resource = iop13xx_tpmi_0_resources,
.dev = {
.dma_mask = &iop13xx_tpmi_mask,
.coherent_dma_mask = DMA_BIT_MASK(64),
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};

Expand All @@ -171,7 +171,7 @@ static struct platform_device iop13xx_tpmi_1_device = {
.resource = iop13xx_tpmi_1_resources,
.dev = {
.dma_mask = &iop13xx_tpmi_mask,
.coherent_dma_mask = DMA_BIT_MASK(64),
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};

Expand All @@ -182,7 +182,7 @@ static struct platform_device iop13xx_tpmi_2_device = {
.resource = iop13xx_tpmi_2_resources,
.dev = {
.dma_mask = &iop13xx_tpmi_mask,
.coherent_dma_mask = DMA_BIT_MASK(64),
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};

Expand All @@ -193,7 +193,7 @@ static struct platform_device iop13xx_tpmi_3_device = {
.resource = iop13xx_tpmi_3_resources,
.dev = {
.dma_mask = &iop13xx_tpmi_mask,
.coherent_dma_mask = DMA_BIT_MASK(64),
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};

Expand Down
4 changes: 4 additions & 0 deletions arch/arm/mach-milbeaut/platsmp.c
Original file line number Diff line number Diff line change
Expand Up @@ -65,6 +65,7 @@ static void m10v_smp_init(unsigned int max_cpus)
writel(KERNEL_UNBOOT_FLAG, m10v_smp_base + cpu * 4);
}

#ifdef CONFIG_HOTPLUG_CPU
static void m10v_cpu_die(unsigned int l_cpu)
{
gic_cpu_if_down(0);
Expand All @@ -83,12 +84,15 @@ static int m10v_cpu_kill(unsigned int l_cpu)

return 1;
}
#endif

static struct smp_operations m10v_smp_ops __initdata = {
.smp_prepare_cpus = m10v_smp_init,
.smp_boot_secondary = m10v_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = m10v_cpu_die,
.cpu_kill = m10v_cpu_kill,
#endif
};
CPU_METHOD_OF_DECLARE(m10v_smp, "socionext,milbeaut-m10v-smp", &m10v_smp_ops);

Expand Down
2 changes: 2 additions & 0 deletions arch/arm/mach-omap1/board-ams-delta.c
Original file line number Diff line number Diff line change
Expand Up @@ -182,6 +182,7 @@ static struct resource latch1_resources[] = {

static struct bgpio_pdata latch1_pdata = {
.label = LATCH1_LABEL,
.base = -1,
.ngpio = LATCH1_NGPIO,
};

Expand Down Expand Up @@ -219,6 +220,7 @@ static struct resource latch2_resources[] = {

static struct bgpio_pdata latch2_pdata = {
.label = LATCH2_LABEL,
.base = -1,
.ngpio = LATCH2_NGPIO,
};

Expand Down
4 changes: 3 additions & 1 deletion arch/arm/mach-omap2/display.c
Original file line number Diff line number Diff line change
Expand Up @@ -250,8 +250,10 @@ static int __init omapdss_init_of(void)
if (!node)
return 0;

if (!of_device_is_available(node))
if (!of_device_is_available(node)) {
of_node_put(node);
return 0;
}

pdev = of_find_device_by_node(node);

Expand Down
Loading

0 comments on commit d849122

Please sign in to comment.