Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/g…

…it/soc/soc

Pull ARM SoC platform updates from Olof Johansson:
 "SoC changes, a substantial part of this is cleanup of some of the
  older platforms that used to have a bunch of board files.

  In particular:

   - Remove non-DT i.MX platforms that haven't seen activity in years,
     it's time to remove them.

   - A bunch of cleanup and removal of platform data for TI/OMAP
     platforms, moving over to genpd for power/reset control (yay!)

   - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
     closer to multiplatform support (not quite there yet, but getting
     close).

  There are a few other changes too, smaller fixlets, etc. For new
  platform support, the primary ones are:

   - New SoC: Hisilicon SD5203, ARM926EJ-S platform.

   - Cpufreq support for i.MX7ULP"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
  ARM: mstar: Select MStar intc
  ARM: stm32: Replace HTTP links with HTTPS ones
  ARM: debug: add UART early console support for SD5203
  ARM: hisi: add support for SD5203 SoC
  ARM: omap3: enable off mode automatically
  clk: imx: imx35: Remove mx35_clocks_init()
  clk: imx: imx31: Remove mx31_clocks_init()
  clk: imx: imx27: Remove mx27_clocks_init()
  ARM: imx: Remove unused definitions
  ARM: imx35: Retrieve the IIM base address from devicetree
  ARM: imx3: Retrieve the AVIC base address from devicetree
  ARM: imx3: Retrieve the CCM base address from devicetree
  ARM: imx31: Retrieve the IIM base address from devicetree
  ARM: imx27: Retrieve the CCM base address from devicetree
  ARM: imx27: Retrieve the SYSCTRL base address from devicetree
  ARM: s3c64xx: bring back notes from removed debug-macro.S
  ARM: s3c24xx: fix Wunused-variable warning on !MMU
  ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
  MAINTAINERS: mark linux-samsung-soc list non-moderated
  ARM: imx: Remove remnant board file support pieces
  ...

Documentation/devicetree/bindings/arm/omap/prm-inst.txt

@@ -18,12 +18,14 @@ Required properties:
 		(base address and length)
 
 Optional properties:
+- #power-domain-cells:	Should be 0 if the instance is a power domain provider.
 - #reset-cells:	Should be 1 if the PRM instance in question supports resets.
 
 Example:
 
 prm_dsp2: prm@1b00 {
 	compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
 	reg = <0x1b00 0x40>;
+	#power-domain-cells = <0>;
 	#reset-cells = <1>;
 };

MAINTAINERS

@@ -2199,8 +2199,8 @@ ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
 L:	[email protected] (subscribers-only)
 S:	Orphan
 W:	http://wiki.openmoko.org/wiki/Neo_FreeRunner
-F:	arch/arm/mach-s3c24xx/gta02.h
-F:	arch/arm/mach-s3c24xx/mach-gta02.c
+F:	arch/arm/mach-s3c/gta02.h
+F:	arch/arm/mach-s3c/mach-gta02.c
 
 ARM/Orion SoC/Technologic Systems TS-78xx platform support
 M:	Alexander Clouter <[email protected]>
@@ -2379,7 +2379,7 @@ ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
 M:	Kukjin Kim <[email protected]>
 M:	Krzysztof Kozlowski <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
-L:	[email protected] (moderated for non-subscribers)
+L:	[email protected]
 S:	Maintained
 Q:	https://patchwork.kernel.org/project/linux-samsung-soc/list/
 F:	Documentation/arm/samsung/
@@ -2389,10 +2389,8 @@ F:	arch/arm/boot/dts/exynos*
 F:	arch/arm/boot/dts/s3c*
 F:	arch/arm/boot/dts/s5p*
 F:	arch/arm/mach-exynos*/
-F:	arch/arm/mach-s3c24*/
-F:	arch/arm/mach-s3c64xx/
+F:	arch/arm/mach-s3c/
 F:	arch/arm/mach-s5p*/
-F:	arch/arm/plat-samsung/
 F:	arch/arm64/boot/dts/exynos/
 F:	drivers/*/*/*s3c24*
 F:	drivers/*/*s3c24*
@@ -2403,6 +2401,9 @@ F:	drivers/soc/samsung/
 F:	drivers/tty/serial/samsung*
 F:	include/linux/soc/samsung/
 N:	exynos
+N:	s3c2410
+N:	s3c64xx
+N:	s5pv210
 
 ARM/SAMSUNG MOBILE MACHINE SUPPORT
 M:	Kyungmin Park <[email protected]>
@@ -2421,7 +2422,7 @@ F:	drivers/media/platform/s5p-g2d/
 
 ARM/SAMSUNG S5P SERIES HDMI CEC SUBSYSTEM SUPPORT
 M:	Marek Szyprowski <[email protected]>
-L:	[email protected] (moderated for non-subscribers)
+L:	[email protected]
 L:	[email protected]
 S:	Maintained
 F:	Documentation/devicetree/bindings/media/s5p-cec.txt
@@ -3415,7 +3416,7 @@ M:	[email protected]
 L:	[email protected]
 S:	Maintained
 F:	arch/arm/boot/dts/bcm470*
-F:	arch/arm/boot/dts/bcm5301x*.dtsi
+F:	arch/arm/boot/dts/bcm5301*
 F:	arch/arm/boot/dts/bcm953012*
 F:	arch/arm/mach-bcm/bcm_5301x.c
 
@@ -13447,7 +13448,7 @@ PCI DRIVER FOR SAMSUNG EXYNOS
 M:	Jingoo Han <[email protected]>
 L:	[email protected]
 L:	[email protected] (moderated for non-subscribers)
-L:	[email protected] (moderated for non-subscribers)
+L:	[email protected]
 S:	Maintained
 F:	drivers/pci/controller/dwc/pci-exynos.c
 
@@ -13854,7 +13855,7 @@ M:	Tomasz Figa <[email protected]>
 M:	Krzysztof Kozlowski <[email protected]>
 M:	Sylwester Nawrocki <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
-L:	[email protected] (moderated for non-subscribers)
+L:	[email protected]
 S:	Maintained
 Q:	https://patchwork.kernel.org/project/linux-samsung-soc/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung.git
@@ -15415,7 +15416,7 @@ F:	include/linux/mfd/samsung/
 SAMSUNG S3C24XX/S3C64XX SOC SERIES CAMIF DRIVER
 M:	Sylwester Nawrocki <[email protected]>
 L:	[email protected]
-L:	[email protected] (moderated for non-subscribers)
+L:	[email protected]
 S:	Maintained
 F:	drivers/media/platform/s3c-camif/
 F:	include/media/drv-intf/s3c_camif.h
@@ -15465,25 +15466,28 @@ SAMSUNG SOC CLOCK DRIVERS
 M:	Sylwester Nawrocki <[email protected]>
 M:	Tomasz Figa <[email protected]>
 M:	Chanwoo Choi <[email protected]>
-L:	[email protected] (moderated for non-subscribers)
+L:	[email protected]
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk.git
 F:	Documentation/devicetree/bindings/clock/exynos*.txt
 F:	Documentation/devicetree/bindings/clock/samsung,s3c*
 F:	Documentation/devicetree/bindings/clock/samsung,s5p*
 F:	drivers/clk/samsung/
 F:	include/dt-bindings/clock/exynos*.h
+F:	include/linux/clk/samsung.h
+F:	include/linux/platform_data/clk-s3c2410.h
 
 SAMSUNG SPI DRIVERS
 M:	Kukjin Kim <[email protected]>
 M:	Krzysztof Kozlowski <[email protected]>
 M:	Andi Shyti <[email protected]>
 L:	[email protected]
-L:	[email protected] (moderated for non-subscribers)
+L:	[email protected]
 S:	Maintained
 F:	Documentation/devicetree/bindings/spi/spi-samsung.txt
 F:	drivers/spi/spi-s3c*
 F:	include/linux/platform_data/spi-s3c64xx.h
+F:	include/linux/spi/s3c24xx-fiq.h
 
 SAMSUNG SXGBE DRIVERS
 M:	Byungho An <[email protected]>
@@ -16001,19 +16005,17 @@ F:	drivers/video/fbdev/simplefb.c
 F:	include/linux/platform_data/simplefb.h
 
 SIMTEC EB110ATX (Chalice CATS)
-M:	Vincent Sanders <[email protected]>
 M:	Simtec Linux Team <[email protected]>
 S:	Supported
 W:	http://www.simtec.co.uk/products/EB110ATX/
 
 SIMTEC EB2410ITX (BAST)
-M:	Vincent Sanders <[email protected]>
 M:	Simtec Linux Team <[email protected]>
 S:	Supported
 W:	http://www.simtec.co.uk/products/EB2410ITX/
-F:	arch/arm/mach-s3c24xx/bast-ide.c
-F:	arch/arm/mach-s3c24xx/bast-irq.c
-F:	arch/arm/mach-s3c24xx/mach-bast.c
+F:	arch/arm/mach-s3c/bast-ide.c
+F:	arch/arm/mach-s3c/bast-irq.c
+F:	arch/arm/mach-s3c/mach-bast.c
 
 SIOX
 M:	Thorsten Scherer <[email protected]>
@@ -18952,7 +18954,7 @@ F:	Documentation/devicetree/bindings/mfd/wm831x.txt
 F:	Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
 F:	Documentation/devicetree/bindings/sound/wlf,arizona.yaml
 F:	Documentation/hwmon/wm83??.rst
-F:	arch/arm/mach-s3c64xx/mach-crag6410*
+F:	arch/arm/mach-s3c/mach-crag6410*
 F:	drivers/clk/clk-wm83*.c
 F:	drivers/extcon/extcon-arizona.c
 F:	drivers/gpio/gpio-*wm*.c

arch/arm/Kconfig

@@ -268,9 +268,7 @@ config PHYS_OFFSET
 	depends on !ARM_PATCH_PHYS_VIRT
 	default DRAM_BASE if !MMU
 	default 0x00000000 if ARCH_EBSA110 || \
-			ARCH_FOOTBRIDGE || \
-			ARCH_INTEGRATOR || \
-			ARCH_REALVIEW
+			ARCH_FOOTBRIDGE
 	default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
 	default 0x20000000 if ARCH_S5PV210
 	default 0xc0000000 if ARCH_SA1100
@@ -506,11 +504,12 @@ config ARCH_S3C24XX
 	select GPIOLIB
 	select GENERIC_IRQ_MULTI_HANDLER
 	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_IO_H
+	select S3C2410_WATCHDOG
 	select SAMSUNG_ATAGS
 	select USE_OF
+	select WATCHDOG
 	help
 	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
 	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
@@ -639,7 +638,6 @@ source "arch/arm/mach-dove/Kconfig"
 source "arch/arm/mach-ep93xx/Kconfig"
 
 source "arch/arm/mach-exynos/Kconfig"
-source "arch/arm/plat-samsung/Kconfig"
 
 source "arch/arm/mach-footbridge/Kconfig"
 
@@ -712,9 +710,7 @@ source "arch/arm/mach-realview/Kconfig"
 
 source "arch/arm/mach-rockchip/Kconfig"
 
-source "arch/arm/mach-s3c24xx/Kconfig"
-
-source "arch/arm/mach-s3c64xx/Kconfig"
+source "arch/arm/mach-s3c/Kconfig"
 
 source "arch/arm/mach-s5pv210/Kconfig"
 

arch/arm/Kconfig.debug

@@ -1005,7 +1005,7 @@ choice
 		  via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).
 
 	config DEBUG_S3C_UART0
-		depends on PLAT_SAMSUNG
+		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
@@ -1017,7 +1017,7 @@ choice
 		  by the boot-loader before use.
 
 	config DEBUG_S3C_UART1
-		depends on PLAT_SAMSUNG
+		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
@@ -1029,7 +1029,7 @@ choice
 		  by the boot-loader before use.
 
 	config DEBUG_S3C_UART2
-		depends on PLAT_SAMSUNG
+		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
@@ -1041,7 +1041,7 @@ choice
 		  by the boot-loader before use.
 
 	config DEBUG_S3C_UART3
-		depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210)
+		depends on ARCH_EXYNOS || ARCH_S5PV210
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
@@ -1086,6 +1086,14 @@ choice
 		  on SA-11x0 UART ports. The kernel will check for the first
 		  enabled UART in a sequence 3-1-2.
 
+	config DEBUG_SD5203_UART
+		bool "Hisilicon SD5203 Debug UART"
+		depends on ARCH_SD5203
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on SD5203 UART.
+
 	config DEBUG_SOCFPGA_UART0
 		depends on ARCH_SOCFPGA
 		bool "Use SOCFPGA UART0 for low-level debug"
@@ -1497,6 +1505,16 @@ config DEBUG_S3C64XX_UART
 config DEBUG_S5PV210_UART
 	bool
 
+config DEBUG_S3C_UART
+	depends on DEBUG_S3C2410_UART || DEBUG_S3C24XX_UART || \
+		   DEBUG_S3C64XX_UART ||  DEBUG_S5PV210_UART || \
+		   DEBUG_EXYNOS_UART
+	int
+	default "0" if DEBUG_S3C_UART0
+	default "1" if DEBUG_S3C_UART1
+	default "2" if DEBUG_S3C_UART2
+	default "3" if DEBUG_S3C_UART3
+
 config DEBUG_OMAP2PLUS_UART
 	bool
 	depends on ARCH_OMAP2PLUS
@@ -1650,6 +1668,7 @@ config DEBUG_UART_PHYS
 	default 0x11006000 if DEBUG_MT6589_UART0
 	default 0x11009000 if DEBUG_MT8135_UART3
 	default 0x16000000 if DEBUG_INTEGRATOR
+	default 0x1600d000 if DEBUG_SD5203_UART
 	default 0x18000300 if DEBUG_BCM_5301X
 	default 0x18000400 if DEBUG_BCM_HR2
 	default 0x18010000 if DEBUG_SIRFATLAS7_UART0
@@ -1852,7 +1871,7 @@ config DEBUG_UART_VIRT
 	default 0xfec60000 if DEBUG_SIRFPRIMA2_UART1
 	default 0xfec90000 if DEBUG_RK32_UART2
 	default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
-	default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
+	default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART
 	default 0xfed60000 if DEBUG_RK29_UART0
 	default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
 	default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3

arch/arm/Makefile

@@ -212,8 +212,7 @@ machine-$(CONFIG_ARCH_REALTEK)		+= realtek
 machine-$(CONFIG_ARCH_REALVIEW)		+= realview
 machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
 machine-$(CONFIG_ARCH_RPC)		+= rpc
-machine-$(CONFIG_ARCH_S3C24XX)		+= s3c24xx
-machine-$(CONFIG_ARCH_S3C64XX)		+= s3c64xx
+machine-$(CONFIG_PLAT_SAMSUNG)		+= s3c
 machine-$(CONFIG_ARCH_S5PV210)		+= s5pv210
 machine-$(CONFIG_ARCH_SA1100)		+= sa1100
 machine-$(CONFIG_ARCH_RENESAS)	 	+= shmobile
@@ -235,13 +234,9 @@ machine-$(CONFIG_PLAT_SPEAR)		+= spear
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
-plat-$(CONFIG_ARCH_EXYNOS)	+= samsung
 plat-$(CONFIG_ARCH_OMAP)	+= omap
-plat-$(CONFIG_ARCH_S3C64XX)	+= samsung
-plat-$(CONFIG_ARCH_S5PV210)	+= samsung
 plat-$(CONFIG_PLAT_ORION)	+= orion
 plat-$(CONFIG_PLAT_PXA)		+= pxa
-plat-$(CONFIG_PLAT_S3C24XX)	+= samsung
 plat-$(CONFIG_PLAT_VERSATILE)	+= versatile
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)

arch/arm/boot/dts/am33xx-l4.dtsi

@@ -425,7 +425,6 @@
 
 		target-module@3e000 {			/* 0x44e3e000, ap 35 60.0 */
 			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			ti,hwmods = "rtc";
 			reg = <0x3e074 0x4>,
 			      <0x3e078 0x4>;
 			reg-names = "rev", "sysc";

arch/arm/boot/dts/am33xx.dtsi

@@ -578,6 +578,7 @@
 					<SYSC_IDLE_SMART>;
 			clocks = <&gfx_l3_clkctrl AM3_GFX_L3_GFX_CLKCTRL 0>;
 			clock-names = "fck";
+			power-domains = <&prm_gfx>;
 			resets = <&prm_gfx 0>;
 			reset-names = "rstctrl";
 			#address-cells = <1>;
@@ -617,6 +618,7 @@
 	prm_gfx: prm@1100 {
 		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
 		reg = <0x1100 0x100>;
+		#power-domain-cells = <0>;
 		#reset-cells = <1>;
 	};
 };

arch/arm/boot/dts/am4372.dtsi

@@ -517,6 +517,7 @@
 					<SYSC_IDLE_SMART>;
 			clocks = <&gfx_l3_clkctrl AM4_GFX_L3_GFX_CLKCTRL 0>;
 			clock-names = "fck";
+			power-domains = <&prm_gfx>;
 			resets = <&prm_gfx 0>;
 			reset-names = "rstctrl";
 			#address-cells = <1>;
@@ -533,6 +534,7 @@
 	prm_gfx: prm@400 {
 		compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
 		reg = <0x400 0x100>;
+		#power-domain-cells = <0>;
 		#reset-cells = <1>;
 	};
 

arch/arm/boot/dts/am437x-l4.dtsi

@@ -409,9 +409,8 @@
 			ranges = <0x0 0x39000 0x1000>;
 		};
 
-		target-module@3e000 {			/* 0x44e3e000, ap 34 60.0 */
+		rtc_target: target-module@3e000 {	/* 0x44e3e000, ap 34 60.0 */
 			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			ti,hwmods = "rtc";
 			reg = <0x3e074 0x4>,
 			      <0x3e078 0x4>;
 			reg-names = "rev", "sysc";

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -833,6 +833,10 @@
 	status = "okay";
 };
 
+&rtc_target {
+	status = "disabled";
+};
+
 &tscadc {
 	status = "okay";
 

arch/arm/boot/dts/dra7-l4.dtsi

@@ -3561,7 +3561,6 @@
 
 		rtctarget: target-module@38000 {			/* 0x48838000, ap 29 12.0 */
 			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			ti,hwmods = "rtcss";
 			reg = <0x38074 0x4>,
 			      <0x38078 0x4>;
 			reg-names = "rev", "sysc";