Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/…

…kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Some more driver fixes for i2c"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: npcm7xx: Clear LAST bit after a failed transaction.
  i2c: cpm: Fix i2c_ram structure
  i2c: i801: Exclude device from suspend direct complete optimization

drivers/i2c/busses/i2c-cpm.c

@@ -65,6 +65,9 @@ struct i2c_ram {
 	char    res1[4];	/* Reserved */
 	ushort  rpbase;		/* Relocation pointer */
 	char    res2[2];	/* Reserved */
+	/* The following elements are only for CPM2 */
+	char    res3[4];	/* Reserved */
+	uint    sdmatmp;	/* Internal */
 };
 
 #define I2COM_START	0x80

drivers/i2c/busses/i2c-i801.c

@@ -1917,6 +1917,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 
 	pci_set_drvdata(dev, priv);
 
+	dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
 	pm_runtime_set_autosuspend_delay(&dev->dev, 1000);
 	pm_runtime_use_autosuspend(&dev->dev);
 	pm_runtime_put_autosuspend(&dev->dev);

drivers/i2c/busses/i2c-npcm7xx.c

@@ -2163,6 +2163,15 @@ static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	if (bus->cmd_err == -EAGAIN)
 		ret = i2c_recover_bus(adap);
 
+	/*
+	 * After any type of error, check if LAST bit is still set,
+	 * due to a HW issue.
+	 * It cannot be cleared without resetting the module.
+	 */
+	if (bus->cmd_err &&
+	    (NPCM_I2CRXF_CTL_LAST_PEC & ioread8(bus->reg + NPCM_I2CRXF_CTL)))
+		npcm_i2c_reset(bus);
+
 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 	/* reenable slave if it was enabled */
 	if (bus->slave)