docs: i2c: i2c-sysfs: fix hyperlinks

dts files cannot be linked conveniently, thus replace them with literal formatting. The links to other rst pages are broken, fix them using the proper syntax. Fixes: 31df719 ("Documentation: i2c: Add doc for I2C sysfs") Signed-off-by: Luca Ceresoli <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
niw · Aug 11, 2022 · fe99b81 · fe99b81
1 parent 55bdfb8
commit fe99b81
Showing 1 changed file with 4 additions and 11 deletions.
diff --git a/Documentation/i2c/i2c-sysfs.rst b/Documentation/i2c/i2c-sysfs.rst
@@ -99,9 +99,7 @@ Caveat
 This may be a confusing part for people who only know about the physical I2C
 design of a board. It is actually possible to rename the I2C bus physical number
 to a different number in logical I2C bus level in Device Tree Source (DTS) under
-section ``aliases``. See
-`arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
-<../../arch/arm/boot/dts/nuvoton-npcm730-gsj.dts>`_
+section ``aliases``. See ``arch/arm/boot/dts/nuvoton-npcm730-gsj.dts``
 for an example of DTS file.
 
 Best Practice: **(To kernel software developers)** It is better to keep the I2C
@@ -289,8 +287,7 @@ MUX channel 0, and all the way to ``i2c-19`` for the MUX channel 3.
 The kernel software developer is able to pin the fanout MUX channels to a static
 logical I2C bus number in the DTS. This doc will not go through the details on
 how to implement this in DTS, but we can see an example in:
-`arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
-<../../arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts>`_
+``arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts``
 
 In the above example, there is an 8-channel I2C MUX at address 0x70 on physical
 I2C bus 2. The channel 2 of the MUX is defined as ``imux18`` in DTS,
@@ -382,13 +379,9 @@ Sysfs for the I2C sensor device::
 
 For more info on the Hwmon Sysfs, refer to the doc:
 
-`Naming and data format standards for sysfs files
-<../hwmon/sysfs-interface.rst>`_
+../hwmon/sysfs-interface.rst
 
 Instantiate I2C Devices in I2C Sysfs
 ------------------------------------
 
-Refer to the doc:
-
-`How to instantiate I2C devices, Method 4: Instantiate from user-space
-<instantiating-devices.rst#method-4-instantiate-from-user-space>`_
+Refer to section "Method 4: Instantiate from user-space" of instantiating-devices.rst