Tags: nlinhtoon/routing
Tags
olsrd: wait for wireless to initialize before starting Wait for wireless to initialize (pending="false") to ensure that any olsrd(6) configured interfaces and their associated devices are up. This provides the init script the ability to properly add all interface sections to the generated config file /tmp/etc/olsrd(6).conf Signed-off-by: Perry Melange <[email protected]>
opennds: Release v9.4.0 Maintainer: Rob White [email protected] Compile tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc Run tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, gl-inet b1300, gl-inet mt300n-v2, Snapshot, 21.02.0, 19.07.8 Description: This version adds new functionality, and fixes some issues * Add - Error message in fas-aes-https if shared key is mismatched [bluewave.net] * Fix - and refactor error 511 page generation[bluewave.net] * Fix - and refactor dnsmasq configuration [bluewave.net] * Fix - Typographic error preventing RFC8910 disable [bluewave.net] * Add - gateway address and gatewayfqdn to ndsctl json output [bluewave.net] * Add - RFC8910 housekeeping on startup and shutdown [bluewave.net] * Add - correctly apply dhcp option 114 for generic Linux [bluewave.net] * Add - reading of configured ndsctlsocket in ndsctl utility[bluewave.net] * Add - use send_error 200 for MHD watchdog [bluewave.net] * Add - generation of page_511 html by library script [bluewave.net] * Add - extend debuglevel support to library scripts [bluewave.net] * Refactor - fas-aes-https to simplify and make customisation of http easier [bluewave.net] * Add - library script for error 511 page, allowing customisation [bluewave.net] * Add - make authmon report connection error details [bluewave.net] * Fix- remove unwanted debug message in ndsctl [bluewave.net] * Add - RFC8910 support by default [bluewave.net] * Add - display status page when accessing /login when authenticated [bluewave.net] * Add - MHD response to RFC8910 requests [bluewave.net] * Add - Dnsmasq RFC8910 configuration [bluewave.net] * Add - send error 511 in response to unsupported http method [bluewave.net] * Add - Check for ca-bundle on OpenWrt, if not installed, add syslog messages and terminate [bluewave.net] * Add - Make ndsctl use the configured value for socket path if set and deprecate -s option [bluewave.net] * Add - Warning message when Walled Garden port 80 is allowed [bluewave.net] * Fix - remove un-needed pthread_kill in termination_handler() [bluewave.net] [T-X] * Fix - debug messages from authmon.sh [bluewave.net] * Fix - Allow disabling gateway fqdn, facilitating access to router port 80 [bluewave.net] * Fix - Segfault in ndsctl when -s option is used incorrectly [bluewave.net] [T-X] * Fix - Typo making calculation of ul/dl rates incorrect [bluewave.net] * Fix - Allow port 80 to be configured in the Walled Garden [bluewave.net] Signed-off-by: Rob White <[email protected]>
opennds: Release v9.4.0 Maintainer: Rob White [email protected] Compile tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc Run tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, gl-inet b1300, gl-inet mt300n-v2, Snapshot, 21.02.0, 19.07.8 Description: This version adds new functionality, and fixes some issues * Add - Error message in fas-aes-https if shared key is mismatched [bluewave.net] * Fix - and refactor error 511 page generation[bluewave.net] * Fix - and refactor dnsmasq configuration [bluewave.net] * Fix - Typographic error preventing RFC8910 disable [bluewave.net] * Add - gateway address and gatewayfqdn to ndsctl json output [bluewave.net] * Add - RFC8910 housekeeping on startup and shutdown [bluewave.net] * Add - correctly apply dhcp option 114 for generic Linux [bluewave.net] * Add - reading of configured ndsctlsocket in ndsctl utility[bluewave.net] * Add - use send_error 200 for MHD watchdog [bluewave.net] * Add - generation of page_511 html by library script [bluewave.net] * Add - extend debuglevel support to library scripts [bluewave.net] * Refactor - fas-aes-https to simplify and make customisation of http easier [bluewave.net] * Add - library script for error 511 page, allowing customisation [bluewave.net] * Add - make authmon report connection error details [bluewave.net] * Fix- remove unwanted debug message in ndsctl [bluewave.net] * Add - RFC8910 support by default [bluewave.net] * Add - display status page when accessing /login when authenticated [bluewave.net] * Add - MHD response to RFC8910 requests [bluewave.net] * Add - Dnsmasq RFC8910 configuration [bluewave.net] * Add - send error 511 in response to unsupported http method [bluewave.net] * Add - Check for ca-bundle on OpenWrt, if not installed, add syslog messages and terminate [bluewave.net] * Add - Make ndsctl use the configured value for socket path if set and deprecate -s option [bluewave.net] * Add - Warning message when Walled Garden port 80 is allowed [bluewave.net] * Fix - remove un-needed pthread_kill in termination_handler() [bluewave.net] [T-X] * Fix - debug messages from authmon.sh [bluewave.net] * Fix - Allow disabling gateway fqdn, facilitating access to router port 80 [bluewave.net] * Fix - Segfault in ndsctl when -s option is used incorrectly [bluewave.net] [T-X] * Fix - Typo making calculation of ul/dl rates incorrect [bluewave.net] * Fix - Allow port 80 to be configured in the Walled Garden [bluewave.net] Signed-off-by: Rob White <[email protected]>
Merge pull request #724 from ecsv/batadv-2021.3 batman-adv: update packages to version 2021.3
Merge pull request #721 from ecsv/batadv-2021.2 batman-adv: Fix build against kernel 5.10
Merge pull request #721 from ecsv/batadv-2021.2 batman-adv: Fix build against kernel 5.10
Merge pull request #713 from mattreeve/master [master] bird2: Fix bus error on OSPF on IPQ806X
naywatch: add naywatch The network may crash on the SoCs, but the SoC itself does not. This leads to a node no longer being accessible in a mesh network. If the node is placed in a location that is not easily accessible, e.g. in a high tower, it can cause a lot of problems. Therefore we check the link-local connectivity on the configured interfaces. Signed-off-by: Nick Hainke <[email protected]> Tested-by: Simon Polack <[email protected]> Signed-off-by: Simon Polack <[email protected]>
opennds: Release v9.2.0 Maintainer: Rob White [email protected] Compile tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc Run tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, gl-inet b1300, gl-inet mt300n-v2, Snapshot, 21.02.0-rc3, 19.07.7 Description: This version adds new functionality, improves performance, adds documentation and fixes an issue * Add - new config options to ndsctl status [bluewave.net] * Add - Readthedocs / man documentation for configuration options [bluewave.net] * Add - Faster convergence of average rates to configured rate quotas [bluewave.net] * Add - BinAuth parse authenticated client database for client data [bluewave.net] * Add - Use heap allocation for http page buffer allowing large page sizes [bluewave.net] * Fix - fail to serve downloaded images on custom themespec [bluewave.net] Signed-off-by: Rob White <[email protected]>
opennds: Release v9.2.0 Maintainer: Rob White [email protected] Compile tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc Run tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, gl-inet b1300, gl-inet mt300n-v2, Snapshot, 21.02.0-rc3, 19.07.7 Description: This version adds new functionality, improves performance, adds documentation and fixes an issue * Add - new config options to ndsctl status [bluewave.net] * Add - Readthedocs / man documentation for configuration options [bluewave.net] * Add - Faster convergence of average rates to configured rate quotas [bluewave.net] * Add - BinAuth parse authenticated client database for client data [bluewave.net] * Add - Use heap allocation for http page buffer allowing large page sizes [bluewave.net] * Fix - fail to serve downloaded images on custom themespec [bluewave.net] Signed-off-by: Rob White <[email protected]>
PreviousNext