Merge branch 'spi/merge' into spi/next

CREDITS

@@ -518,6 +518,14 @@ N: Zach Brown
 E: [email protected]
 D: maestro pci sound
 
+M: David Brownell
+D: Kernel engineer, mentor, and friend.  Maintained USB EHCI and
+D: gadget layers, SPI subsystem, GPIO subsystem, and more than a few
+D: device drivers.  His encouragement also helped many engineers get
+D: started working on the Linux kernel.  David passed away in early
+D: 2011, and will be greatly missed.
+W: https://lkml.org/lkml/2011/4/5/36
+
 N: Gary Brubaker
 E: [email protected]
 D: USB Serial Empeg Empeg-car Mark I/II Driver

Documentation/kernel-parameters.txt

@@ -2598,6 +2598,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 					unlock ejectable media);
 				m = MAX_SECTORS_64 (don't transfer more
 					than 64 sectors = 32 KB at a time);
+				n = INITIAL_READ10 (force a retry of the
+					initial READ(10) command);
 				o = CAPACITY_OK (accept the capacity
 					reported by the device);
 				r = IGNORE_RESIDUE (the device reports

MAINTAINERS

@@ -1739,7 +1739,7 @@ S:	Supported
 F:	drivers/net/enic/
 
 CIRRUS LOGIC EP93XX ETHERNET DRIVER
-M:	Lennert Buytenhek <[email protected]>
+M:	Hartley Sweeten <[email protected]>
 L:	[email protected]
 S:	Maintained
 F:	drivers/net/arm/ep93xx_eth.c
@@ -4252,8 +4252,7 @@ F:	drivers/mmc/
 F:	include/linux/mmc/
 
 MULTIMEDIA CARD (MMC) ETC. OVER SPI
-M:	David Brownell <[email protected]>
-S:	Odd Fixes
+S:	Orphan
 F:	drivers/mmc/host/mmc_spi.c
 F:	include/linux/spi/mmc_spi.h
 
@@ -4603,7 +4602,6 @@ F:	drivers/media/video/omap3isp/*
 
 OMAP USB SUPPORT
 M:	Felipe Balbi <[email protected]>
-M:	David Brownell <[email protected]>
 L:	[email protected]
 L:	[email protected]
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
@@ -4947,6 +4945,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32.gi
 F:	drivers/input/serio/i8042-unicore32io.h
 F:	drivers/i2c/busses/i2c-puv3.c
 F:	drivers/video/fb-puv3.c
+F:	drivers/rtc/rtc-puv3.c
 
 PMC SIERRA MaxRAID DRIVER
 M:	Anil Ravindranath <[email protected]>
@@ -5984,7 +5983,6 @@ F:	Documentation/serial/specialix.txt
 F:	drivers/staging/tty/specialix*
 
 SPI SUBSYSTEM
-M:	David Brownell <[email protected]>
 M:	Grant Likely <[email protected]>
 L:	[email protected]
 Q:	http://patchwork.kernel.org/project/spi-devel-general/list/
@@ -6432,9 +6430,8 @@ S:	Maintained
 F:	drivers/usb/misc/rio500*
 
 USB EHCI DRIVER
-M:	David Brownell <[email protected]>
 L:	[email protected]
-S:	Odd Fixes
+S:	Orphan
 F:	Documentation/usb/ehci.txt
 F:	drivers/usb/host/ehci*
 
@@ -6448,9 +6445,10 @@ S:	Maintained
 F:	drivers/media/video/et61x251/
 
 USB GADGET/PERIPHERAL SUBSYSTEM
-M:	David Brownell <[email protected]>
+M:	Felipe Balbi <[email protected]>
 L:	[email protected]
 W:	http://www.linux-usb.org/gadget
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 S:	Maintained
 F:	drivers/usb/gadget/
 F:	include/linux/usb/gadget*
@@ -6492,9 +6490,8 @@ S:	Maintained
 F:	sound/usb/midi.*
 
 USB OHCI DRIVER
-M:	David Brownell <[email protected]>
 L:	[email protected]
-S:	Odd Fixes
+S:	Orphan
 F:	Documentation/usb/ohci.txt
 F:	drivers/usb/host/ohci*
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Sneaky Weasel
 
 # *DOCUMENTATION*
@@ -378,7 +378,7 @@ KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
 KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
-KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
+KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
 
 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
 export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
@@ -1005,7 +1005,7 @@ endef
 
 define filechk_version.h
 	(echo \#define LINUX_VERSION_CODE $(shell                             \
-	expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL));     \
+	expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL));    \
 	echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
 endef
 
@@ -1110,11 +1110,6 @@ modules_install: _modinst_ _modinst_post
 
 PHONY += _modinst_
 _modinst_:
-	@if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
-		echo "Warning: you may need to install module-init-tools"; \
-		echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
-		sleep 1; \
-	fi
 	@rm -rf $(MODLIB)/kernel
 	@rm -f $(MODLIB)/source
 	@mkdir -p $(MODLIB)/kernel
@@ -1531,12 +1526,7 @@ quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files))
 
 # Run depmod only if we have System.map and depmod is executable
 quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
-      cmd_depmod = \
-	if [ -r System.map -a -x $(DEPMOD) ]; then                              \
-		$(DEPMOD) -ae -F System.map                                     \
-		$(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) )     \
-		$(KERNELRELEASE);                                               \
-	fi
+      cmd_depmod = $(srctree)/scripts/depmod.sh $(DEPMOD) $(KERNELRELEASE)
 
 # Create temporary dir for module support files
 # clean it up only when building all modules

arch/arm/mach-ep93xx/core.c

@@ -402,11 +402,15 @@ static struct resource ep93xx_eth_resource[] = {
 	}
 };
 
+static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32);
+
 static struct platform_device ep93xx_eth_device = {
 	.name		= "ep93xx-eth",
 	.id		= -1,
 	.dev		= {
-		.platform_data	= &ep93xx_eth_data,
+		.platform_data		= &ep93xx_eth_data,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.dma_mask		= &ep93xx_eth_dma_mask,
 	},
 	.num_resources	= ARRAY_SIZE(ep93xx_eth_resource),
 	.resource	= ep93xx_eth_resource,

arch/arm/mach-exynos4/Kconfig

@@ -91,6 +91,11 @@ config EXYNOS4_SETUP_FIMC
 	help
 	  Common setup code for the camera interfaces.
 
+config EXYNOS4_SETUP_USB_PHY
+	bool
+	help
+	  Common setup code for USB PHY controller
+
 # machine support
 
 menu "EXYNOS4 Machines"
@@ -176,6 +181,7 @@ config MACH_NURI
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C5
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
 	select SAMSUNG_DEV_PWM
 	help
 	  Machine support for Samsung Mobile NURI Board.

arch/arm/mach-exynos4/Makefile

@@ -56,4 +56,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_EXYNOS4_SETUP_SDHCI)	+= setup-sdhci.o
 obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
 
-obj-$(CONFIG_USB_SUPPORT)		+= usb-phy.o
+obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY)	+= setup-usb-phy.o

arch/arm/mach-exynos4/cpu.c

@@ -98,7 +98,7 @@ static struct map_desc exynos4_iodesc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S5P_VA_USB_HSPHY,
+		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_HSPHY),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,

arch/arm/mach-exynos4/include/mach/regs-usb-phy.h

@@ -11,7 +11,7 @@
 #ifndef __PLAT_S5P_REGS_USB_PHY_H
 #define __PLAT_S5P_REGS_USB_PHY_H
 
-#define EXYNOS4_HSOTG_PHYREG(x)		((x) + S5P_VA_USB_HSPHY)
+#define EXYNOS4_HSOTG_PHYREG(x)		((x) + S3C_VA_USB_HSPHY)
 
 #define EXYNOS4_PHYPWR			EXYNOS4_HSOTG_PHYREG(0x00)
 #define PHY1_HSIC_NORMAL_MASK		(0xf << 9)

arch/arm/mach-exynos4/time.c

@@ -206,6 +206,7 @@ static cycle_t exynos4_pwm4_read(struct clocksource *cs)
 	return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40));
 }
 
+#ifdef CONFIG_PM
 static void exynos4_pwm4_resume(struct clocksource *cs)
 {
 	unsigned long pclk;
@@ -218,6 +219,7 @@ static void exynos4_pwm4_resume(struct clocksource *cs)
 	exynos4_pwm_init(4, ~0);
 	exynos4_pwm_start(4, 1);
 }
+#endif
 
 struct clocksource pwm_clocksource = {
 	.name		= "pwm_timer4",

arch/arm/mach-omap1/dma.c

@@ -284,22 +284,23 @@ static int __init omap1_system_dma_init(void)
 	dma_base = ioremap(res[0].start, resource_size(&res[0]));
 	if (!dma_base) {
 		pr_err("%s: Unable to ioremap\n", __func__);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto exit_device_put;
 	}
 
 	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
 	if (ret) {
 		dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
 			__func__, pdev->name, pdev->id);
-		goto exit_device_del;
+		goto exit_device_put;
 	}
 
 	p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
 	if (!p) {
 		dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n",
 			__func__, pdev->name);
 		ret = -ENOMEM;
-		goto exit_device_put;
+		goto exit_device_del;
 	}
 
 	d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL);
@@ -380,10 +381,10 @@ static int __init omap1_system_dma_init(void)
 	kfree(d);
 exit_release_p:
 	kfree(p);
-exit_device_put:
-	platform_device_put(pdev);
 exit_device_del:
 	platform_device_del(pdev);
+exit_device_put:
+	platform_device_put(pdev);
 
 	return ret;
 }

arch/arm/mach-omap2/board-2430sdp.c

@@ -26,13 +26,13 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/gpio.h>
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/gpmc.h>

arch/arm/mach-omap2/board-3430sdp.c

@@ -622,19 +622,19 @@ static struct omap_device_pad serial3_pads[] __initdata = {
 			 OMAP_MUX_MODE0),
 };
 
-static struct omap_board_data serial1_data = {
+static struct omap_board_data serial1_data __initdata = {
 	.id		= 0,
 	.pads		= serial1_pads,
 	.pads_cnt	= ARRAY_SIZE(serial1_pads),
 };
 
-static struct omap_board_data serial2_data = {
+static struct omap_board_data serial2_data __initdata = {
 	.id		= 1,
 	.pads		= serial2_pads,
 	.pads_cnt	= ARRAY_SIZE(serial2_pads),
 };
 
-static struct omap_board_data serial3_data = {
+static struct omap_board_data serial3_data __initdata = {
 	.id		= 2,
 	.pads		= serial3_pads,
 	.pads_cnt	= ARRAY_SIZE(serial3_pads),

arch/arm/mach-omap2/board-4430sdp.c

@@ -258,7 +258,7 @@ static struct gpio sdp4430_eth_gpios[] __initdata = {
 	{ ETH_KS8851_IRQ,	GPIOF_IN,		"eth_irq"	},
 };
 
-static int omap_ethernet_init(void)
+static int __init omap_ethernet_init(void)
 {
 	int status;
 
@@ -322,6 +322,7 @@ static struct omap2_hsmmc_info mmc[] = {
 		.gpio_wp	= -EINVAL,
 		.nonremovable   = true,
 		.ocr_mask	= MMC_VDD_29_30,
+		.no_off_init	= true,
 	},
 	{
 		.mmc		= 1,
@@ -681,19 +682,19 @@ static struct omap_device_pad serial4_pads[] __initdata = {
 			 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
 };
 
-static struct omap_board_data serial2_data = {
+static struct omap_board_data serial2_data __initdata = {
 	.id		= 1,
 	.pads		= serial2_pads,
 	.pads_cnt	= ARRAY_SIZE(serial2_pads),
 };
 
-static struct omap_board_data serial3_data = {
+static struct omap_board_data serial3_data __initdata = {
 	.id		= 2,
 	.pads		= serial3_pads,
 	.pads_cnt	= ARRAY_SIZE(serial3_pads),
 };
 
-static struct omap_board_data serial4_data = {
+static struct omap_board_data serial4_data __initdata = {
 	.id		= 3,
 	.pads		= serial4_pads,
 	.pads_cnt	= ARRAY_SIZE(serial4_pads),
@@ -729,7 +730,7 @@ static void __init omap_4430sdp_init(void)
 
 	if (omap_rev() == OMAP4430_REV_ES1_0)
 		package = OMAP_PACKAGE_CBL;
-	omap4_mux_init(board_mux, package);
+	omap4_mux_init(board_mux, NULL, package);
 
 	omap_board_config = sdp4430_config;
 	omap_board_config_size = ARRAY_SIZE(sdp4430_config);

arch/arm/mach-omap2/board-apollon.c

@@ -27,13 +27,13 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/smc91x.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
-#include <mach/gpio.h>
 #include <plat/led.h>
 #include <plat/usb.h>
 #include <plat/board.h>

arch/arm/mach-omap2/board-cm-t35.c

@@ -63,8 +63,6 @@
 #define SB_T35_SMSC911X_CS	4
 #define SB_T35_SMSC911X_GPIO	65
 
-#define NAND_BLOCK_SIZE		SZ_128K
-
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 #include <linux/smsc911x.h>
 #include <plat/gpmc-smsc911x.h>