ALSA: ice1712 delta - initialize SPI clock

The driver was using an initial value for the clock on the SPI bus
which was read from ICE1712 EEPROM,
ice->eeprom.data[ICE_EEP1_GPIO_STATE] & ICE1712_DELTA_AP_CCLK (0x02)

It appears some cards have it default high, some cards
have it default low. On my Delta 66 rev. E:
$ cat /proc/asound/M66/ice1712 | grep 'GPIO state'
  GPIO state       : 0x70 /* ICE1712_DELTA_AP_CCLK bit is zero */
On my Audiophile 2496:
$ cat /proc/asound/M2496/ice1712 | grep 'GPIO state'
  GPIO state       : 0xfe /* ICE1712_DELTA_AP_CCLK bit is one */

It must be raised before the first SPI write happens, or the write will
fail, leading to:

[   23.248721] invalid CS8427 signature 0x0: let me try again...

I theorize that 4eb4550
is no longer needed, it was a different way to workaround
the problem.

[fixed variable decleration by tiwai]

Signed-off-by: Brian Bloniarz <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>

sound/pci/ice1712/delta.c

@@ -580,6 +580,7 @@ static int __devinit snd_ice1712_delta_init(struct snd_ice1712 *ice)
 {
 	int err;
 	struct snd_akm4xxx *ak;
+	unsigned char tmp;
 
 	if (ice->eeprom.subvendor == ICE1712_SUBDEVICE_DELTA1010 &&
 	    ice->eeprom.gpiodir == 0x7b)
@@ -622,6 +623,12 @@ static int __devinit snd_ice1712_delta_init(struct snd_ice1712 *ice)
 		break;
 	}
 
+	/* initialize the SPI clock to high */
+	tmp = snd_ice1712_read(ice, ICE1712_IREG_GPIO_DATA);
+	tmp |= ICE1712_DELTA_AP_CCLK;
+	snd_ice1712_write(ice, ICE1712_IREG_GPIO_DATA, tmp);
+	udelay(5);
+
 	/* initialize spdif */
 	switch (ice->eeprom.subvendor) {
 	case ICE1712_SUBDEVICE_AUDIOPHILE: