Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
irqchip/mips-gic: Avoid spuriously handling masked interrupts
Commit 7778c4b ("irqchip: mips-gic: Use pcpu_masks to avoid reading GIC_SH_MASK*") removed the read of the hardware mask register when handling shared interrupts, instead using the driver's shadow pcpu_masks entry as the effective mask. Unfortunately this did not take account of the write to pcpu_masks during gic_shared_irq_domain_map, which effectively unmasks the interrupt early. If an interrupt is asserted, gic_handle_shared_int decodes and processes the interrupt even though it has not yet been unmasked via gic_unmask_irq, which also sets the appropriate bit in pcpu_masks. On the MIPS Boston board, when a console command line of "console=ttyS0,115200n8r" is passed, the modem status IRQ is enabled in the UART, which is immediately raised to the GIC. The interrupt has been mapped, but no handler has yet been registered, nor is it expected to be unmasked. However, the write to pcpu_masks in gic_shared_irq_domain_map has effectively unmasked it, resulting in endless reports of: [ 5.058454] irq 13, desc: ffffffff80a7ad80, depth: 1, count: 0, unhandled: 0 [ 5.062057] ->handle_irq(): ffffffff801b1838, [ 5.062175] handle_bad_irq+0x0/0x2c0 Where IRQ 13 is the UART interrupt. To fix this, just remove the write to pcpu_masks in gic_shared_irq_domain_map. The existing write in gic_unmask_irq is the correct place for what is now the effective unmasking. Cc: [email protected] Fixes: 7778c4b ("irqchip: mips-gic: Use pcpu_masks to avoid reading GIC_SH_MASK*") Signed-off-by: Matt Redfearn <[email protected]> Reviewed-by: Paul Burton <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
- Loading branch information