gpio: pca953x: fix an incorrect lockdep warning

If an I2C GPIO multiplexer is driven by a GPIO provided by an expander
when there's a second expander using the same device driver on one of
the I2C bus segments, lockdep prints a deadlock warning when trying to
set the direction or the value of the GPIOs provided by the second
expander.

The below diagram presents the setup:

                                               - - - - -
 -------             ---------  Bus segment 1 |         |
|       |           |         |---------------  Devices
|       | SCL/SDA   |         |               |         |
| Linux |-----------| I2C MUX |                - - - - -
|       |    |      |         | Bus segment 2
|       |    |      |         |-------------------
 -------     |       ---------                    |
             |           |                    - - - - -
        ------------     | MUX GPIO          |         |
       |            |    |                     Devices
       |    GPIO    |    |                   |         |
       | Expander 1 |----                     - - - - -
       |            |                             |
        ------------                              | SCL/SDA
                                                  |
                                             ------------
                                            |            |
                                            |    GPIO    |
                                            | Expander 2 |
                                            |            |
                                             ------------

The reason for lockdep warning is that we take the chip->i2c_lock in
pca953x_gpio_set_value() or pca953x_gpio_direction_output() and then
come right back to pca953x_gpio_set_value() when the GPIO mux kicks
in. The locks actually protect different expanders, but for lockdep
both are of the same class, so it says:

  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&chip->i2c_lock);
   lock(&chip->i2c_lock);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

In order to get rid of the warning, retrieve the adapter nesting depth
and use it as lockdep subclass for chip->i2c_lock.

Signed-off-by: Bartosz Golaszewski <[email protected]>
Acked-by: Peter Rosin <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>

drivers/gpio/gpio-pca953x.c

@@ -786,6 +786,8 @@ static int pca953x_probe(struct i2c_client *client,
 	chip->chip_type = PCA_CHIP_TYPE(chip->driver_data);
 
 	mutex_init(&chip->i2c_lock);
+	lockdep_set_subclass(&chip->i2c_lock,
+			     i2c_adapter_depth(client->adapter));
 
 	/* initialize cached registers from their original values.
 	 * we can't share this chip with another i2c master.