ASoC: tegra: Add platform driver for rt5677 audio codec

The driver supports NVIDIA Tegra Ryu board

Sponsored: Google ChromeOS
Signed-off-by: Anatol Pomozov <[email protected]>
Signed-off-by: Mark Brown <[email protected]>

Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.txt

@@ -0,0 +1,67 @@
+NVIDIA Tegra audio complex, with RT5677 CODEC
+
+Required properties:
+- compatible : "nvidia,tegra-audio-rt5677"
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+  - pll_a
+  - pll_a_out0
+  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+- nvidia,model : The user-visible name of this sound complex.
+- nvidia,audio-routing : A list of the connections between audio components.
+  Each entry is a pair of strings, the first being the connection's sink,
+  the second being the connection's source. Valid names for sources and
+  sinks are the RT5677's pins (as documented in its binding), and the jacks
+  on the board:
+
+  * Headphone
+  * Speaker
+  * Headset Mic
+  * Internal Mic 1
+  * Internal Mic 2
+
+- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
+  connected to the CODEC.
+- nvidia,audio-codec : The phandle of the RT5677 audio codec. This binding
+  assumes that AIF1 on the CODEC is connected to Tegra.
+
+Optional properties:
+- nvidia,hp-det-gpios : The GPIO that detects headphones are plugged in
+- nvidia,hp-en-gpios : The GPIO that enables headphone amplifier
+- nvidia,mic-present-gpios: The GPIO that mic jack is plugged in
+- nvidia,dmic-clk-en-gpios : The GPIO that gates DMIC clock signal
+
+Example:
+
+sound {
+	compatible = "nvidia,tegra-audio-rt5677-ryu",
+	        "nvidia,tegra-audio-rt5677";
+	nvidia,model = "NVIDIA Tegra Ryu";
+
+	nvidia,audio-routing =
+		"Headphone", "LOUT2",
+		"Headphone", "LOUT1",
+		"Headset Mic", "MICBIAS1",
+		"IN1P", "Headset Mic",
+		"IN1N", "Headset Mic",
+		"DMIC L1", "Internal Mic 1",
+		"DMIC R1", "Internal Mic 1",
+		"DMIC L2", "Internal Mic 2",
+		"DMIC R2", "Internal Mic 2",
+		"Speaker", "PDM1L",
+		"Speaker", "PDM1R";
+
+	nvidia,i2s-controller = <&tegra_i2s1>;
+	nvidia,audio-codec = <&rt5677>;
+
+	nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+	nvidia,mic-present-gpios = <&gpio TEGRA_GPIO(O, 5) GPIO_ACTIVE_LOW>;
+	nvidia,hp-en-gpios = <&rt5677 1 GPIO_ACTIVE_HIGH>;
+	nvidia,dmic-clk-en-gpios = <&rt5677 2 GPIO_ACTIVE_HIGH>;
+
+	clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+	         <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+	         <&tegra_car TEGRA124_CLK_EXTERN1>;
+	clock-names = "pll_a", "pll_a_out0", "mclk";
+};

sound/soc/tegra/Kconfig

@@ -128,3 +128,13 @@ config SND_SOC_TEGRA_MAX98090
 	help
 	  Say Y or M here if you want to add support for SoC audio on Tegra
 	  boards using the MAX98090 codec, such as Venice2.
+
+config SND_SOC_TEGRA_RT5677
+	tristate "SoC Audio support for Tegra boards using a RT5677 codec"
+	depends on SND_SOC_TEGRA && I2C && GPIOLIB
+	select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
+	select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
+	select SND_SOC_RT5677
+	help
+	  Say Y or M here if you want to add support for SoC audio on Tegra
+	  boards using the RT5677 codec, such as Ryu.

sound/soc/tegra/Makefile

@@ -19,6 +19,7 @@ obj-$(CONFIG_SND_SOC_TEGRA30_I2S) += snd-soc-tegra30-i2s.o
 
 # Tegra machine Support
 snd-soc-tegra-rt5640-objs := tegra_rt5640.o
+snd-soc-tegra-rt5677-objs := tegra_rt5677.o
 snd-soc-tegra-wm8753-objs := tegra_wm8753.o
 snd-soc-tegra-wm8903-objs := tegra_wm8903.o
 snd-soc-tegra-wm9712-objs := tegra_wm9712.o
@@ -27,6 +28,7 @@ snd-soc-tegra-alc5632-objs := tegra_alc5632.o
 snd-soc-tegra-max98090-objs := tegra_max98090.o
 
 obj-$(CONFIG_SND_SOC_TEGRA_RT5640) += snd-soc-tegra-rt5640.o
+obj-$(CONFIG_SND_SOC_TEGRA_RT5677) += snd-soc-tegra-rt5677.o
 obj-$(CONFIG_SND_SOC_TEGRA_WM8753) += snd-soc-tegra-wm8753.o
 obj-$(CONFIG_SND_SOC_TEGRA_WM8903) += snd-soc-tegra-wm8903.o
 obj-$(CONFIG_SND_SOC_TEGRA_WM9712) += snd-soc-tegra-wm9712.o