Merge branch 'parisc-4.15-2' of git://git.kernel.org/pub/scm/linux/ke…

…rnel/git/deller/parisc-linux

Pull parisc fixes from Helge Deller:
 "There are two important fixes here:

   - Add PCI quirks to disable built-in a serial AUX and a graphics
     cards from specific GSP (management board) PCI cards. This fixes
     boot via serial console on rp3410 and rp3440 machines.

   - Revert the "Re-enable interrups early" patch which was added to
     kernel v4.10. It can trigger stack overflows and thus silent data
     corruption. With this patch reverted we can lower our thread stack
     back to 16kb again.

  The other patches are minor cleanups: avoid duplicate includes,
  indenting fixes, correctly align variable in asm code"

* 'parisc-4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Reduce thread stack to 16 kb
  Revert "parisc: Re-enable interrupts early"
  parisc: remove duplicate includes
  parisc: Hide Diva-built-in serial aux and graphics card
  parisc: Align os_hpmc_size on word boundary
  parisc: Fix indenting in puts()

arch/parisc/boot/compressed/misc.c

@@ -123,8 +123,8 @@ int puts(const char *s)
 	while ((nuline = strchr(s, '\n')) != NULL) {
 		if (nuline != s)
 			pdc_iodc_print(s, nuline - s);
-			pdc_iodc_print("\r\n", 2);
-			s = nuline + 1;
+		pdc_iodc_print("\r\n", 2);
+		s = nuline + 1;
 	}
 	if (*s != '\0')
 		pdc_iodc_print(s, strlen(s));

arch/parisc/include/asm/thread_info.h

@@ -35,7 +35,12 @@ struct thread_info {
 
 /* thread information allocation */
 
+#ifdef CONFIG_IRQSTACKS
+#define THREAD_SIZE_ORDER	2 /* PA-RISC requires at least 16k stack */
+#else
 #define THREAD_SIZE_ORDER	3 /* PA-RISC requires at least 32k stack */
+#endif
+
 /* Be sure to hunt all references to this down when you change the size of
  * the kernel stack */
 #define THREAD_SIZE             (PAGE_SIZE << THREAD_SIZE_ORDER)

arch/parisc/kernel/entry.S

@@ -878,9 +878,6 @@ ENTRY_CFI(syscall_exit_rfi)
 	STREG   %r19,PT_SR7(%r16)
 
 intr_return:
-	/* NOTE: Need to enable interrupts incase we schedule. */
-	ssm     PSW_SM_I, %r0
-
 	/* check for reschedule */
 	mfctl   %cr30,%r1
 	LDREG   TI_FLAGS(%r1),%r19	/* sched.h: TIF_NEED_RESCHED */
@@ -907,6 +904,11 @@ intr_check_sig:
 	LDREG	PT_IASQ1(%r16), %r20
 	cmpib,COND(=),n 0,%r20,intr_restore /* backward */
 
+	/* NOTE: We need to enable interrupts if we have to deliver
+	 * signals. We used to do this earlier but it caused kernel
+	 * stack overflows. */
+	ssm     PSW_SM_I, %r0
+
 	copy	%r0, %r25			/* long in_syscall = 0 */
 #ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29			/* Reference param save area */
@@ -958,6 +960,10 @@ intr_do_resched:
 	cmpib,COND(=)	0, %r20, intr_do_preempt
 	nop
 
+	/* NOTE: We need to enable interrupts if we schedule.  We used
+	 * to do this earlier but it caused kernel stack overflows. */
+	ssm     PSW_SM_I, %r0
+
 #ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif

arch/parisc/kernel/hpmc.S

@@ -305,6 +305,7 @@ ENDPROC_CFI(os_hpmc)
 
 
 	__INITRODATA
+	.align 4
 	.export os_hpmc_size
 os_hpmc_size:
 	.word .os_hpmc_end-.os_hpmc

arch/parisc/kernel/unwind.c

@@ -15,7 +15,6 @@
 #include <linux/slab.h>
 #include <linux/kallsyms.h>
 #include <linux/sort.h>
-#include <linux/sched.h>
 
 #include <linux/uaccess.h>
 #include <asm/assembly.h>

arch/parisc/lib/delay.c

@@ -16,9 +16,7 @@
 #include <linux/preempt.h>
 #include <linux/init.h>
 
-#include <asm/processor.h>
 #include <asm/delay.h>
-
 #include <asm/special_insns.h>    /* for mfctl() */
 #include <asm/processor.h> /* for boot_cpu_data */
 

drivers/parisc/lba_pci.c

@@ -1692,3 +1692,36 @@ void lba_set_iregs(struct parisc_device *lba, u32 ibase, u32 imask)
 	iounmap(base_addr);
 }
 
+
+/*
+ * The design of the Diva management card in rp34x0 machines (rp3410, rp3440)
+ * seems rushed, so that many built-in components simply don't work.
+ * The following quirks disable the serial AUX port and the built-in ATI RV100
+ * Radeon 7000 graphics card which both don't have any external connectors and
+ * thus are useless, and even worse, e.g. the AUX port occupies ttyS0 and as
+ * such makes those machines the only PARISC machines on which we can't use
+ * ttyS0 as boot console.
+ */
+static void quirk_diva_ati_card(struct pci_dev *dev)
+{
+	if (dev->subsystem_vendor != PCI_VENDOR_ID_HP ||
+	    dev->subsystem_device != 0x1292)
+		return;
+
+	dev_info(&dev->dev, "Hiding Diva built-in ATI card");
+	dev->device = 0;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QY,
+	quirk_diva_ati_card);
+
+static void quirk_diva_aux_disable(struct pci_dev *dev)
+{
+	if (dev->subsystem_vendor != PCI_VENDOR_ID_HP ||
+	    dev->subsystem_device != 0x1291)
+		return;
+
+	dev_info(&dev->dev, "Hiding Diva built-in AUX serial device");
+	dev->device = 0;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX,
+	quirk_diva_aux_disable);