ARCv2: SMP: Mask only private-per-core IRQ lines on boot at core intc

Recent commit a8ec3ee "arc: Mask individual IRQ lines during core
INTC init" breaks interrupt handling on ARCv2 SMP systems.

That commit masked all interrupts at onset, as some controllers on some
boards (customer as well as internal), would assert interrutps early
before any handlers were installed.  For SMP systems, the masking was
done at each cpu's core-intc.  Later, when the IRQ was actually
requested, it was unmasked, but only on the requesting cpu.

For "common" interrupts, which were wired up from the 2nd level IDU
intc, this was as issue as they needed to be enabled on ALL the cpus
(given that IDU IRQs are by default served Round Robin across cpus)

So fix that by NOT masking "common" interrupts at core-intc, but instead
at the 2nd level IDU intc (latter already being done in idu_of_init())

Fixes: a8ec3ee ("arc: Mask individual IRQ lines during core INTC init")
Signed-off-by: Alexey Brodkin <[email protected]>
[vgupta: reworked changelog, removed the extraneous idu_irq_mask_raw()]
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

arch/arc/kernel/intc-arcv2.c

@@ -75,13 +75,20 @@ void arc_init_IRQ(void)
 	 * Set a default priority for all available interrupts to prevent
 	 * switching of register banks if Fast IRQ and multiple register banks
 	 * are supported by CPU.
-	 * Also disable all IRQ lines so faulty external hardware won't
+	 * Also disable private-per-core IRQ lines so faulty external HW won't
 	 * trigger interrupt that kernel is not ready to handle.
 	 */
 	for (i = NR_EXCEPTIONS; i < irq_bcr.irqs + NR_EXCEPTIONS; i++) {
 		write_aux_reg(AUX_IRQ_SELECT, i);
 		write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
-		write_aux_reg(AUX_IRQ_ENABLE, 0);
+
+		/*
+		 * Only mask cpu private IRQs here.
+		 * "common" interrupts are masked at IDU, otherwise it would
+		 * need to be unmasked at each cpu, with IPIs
+		 */
+		if (i < FIRST_EXT_IRQ)
+			write_aux_reg(AUX_IRQ_ENABLE, 0);
 	}
 
 	/* setup status32, don't enable intr yet as kernel doesn't want */

arch/arc/kernel/intc-compact.c

@@ -27,7 +27,7 @@
  */
 void arc_init_IRQ(void)
 {
-	int level_mask = 0, i;
+	unsigned int level_mask = 0, i;
 
        /* Is timer high priority Interrupt (Level2 in ARCompact jargon) */
 	level_mask |= IS_ENABLED(CONFIG_ARC_COMPACT_IRQ_LEVELS) << TIMER0_IRQ;