Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:
 "Lots of fixes, mostly drivers as is usually the case.

   1) Don't treat zero DMA address as invalid in vmxnet3, from Alexey
      Khoroshilov.

   2) Fix element timeouts in netfilter's nft_dynset, from Anders K.
      Pedersen.

   3) Don't put aead_req crypto struct on the stack in mac80211, from
      Ard Biesheuvel.

   4) Several uninitialized variable warning fixes from Arnd Bergmann.

   5) Fix memory leak in cxgb4, from Colin Ian King.

   6) Fix bpf handling of VLAN header push/pop, from Daniel Borkmann.

   7) Several VRF semantic fixes from David Ahern.

   8) Set skb->protocol properly in ip6_tnl_xmit(), from Eli Cooper.

   9) Socket needs to be locked in udp_disconnect(), from Eric Dumazet.

  10) Div-by-zero on 32-bit fix in mlx4 driver, from Eugenia Emantayev.

  11) Fix stale link state during failover in NCSCI driver, from Gavin
      Shan.

  12) Fix netdev lower adjacency list traversal, from Ido Schimmel.

  13) Propvide proper handle when emitting notifications of filter
      deletes, from Jamal Hadi Salim.

  14) Memory leaks and big-endian issues in rtl8xxxu, from Jes Sorensen.

  15) Fix DESYNC_FACTOR handling in ipv6, from Jiri Bohac.

  16) Several routing offload fixes in mlxsw driver, from Jiri Pirko.

  17) Fix broadcast sync problem in TIPC, from Jon Paul Maloy.

  18) Validate chunk len before using it in SCTP, from Marcelo Ricardo
      Leitner.

  19) Revert a netns locking change that causes regressions, from Paul
      Moore.

  20) Add recursion limit to GRO handling, from Sabrina Dubroca.

  21) GFP_KERNEL in irq context fix in ibmvnic, from Thomas Falcon.

  22) Avoid accessing stale vxlan/geneve socket in data path, from
      Pravin Shelar"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (189 commits)
  geneve: avoid using stale geneve socket.
  vxlan: avoid using stale vxlan socket.
  qede: Fix out-of-bound fastpath memory access
  net: phy: dp83848: add dp83822 PHY support
  enic: fix rq disable
  tipc: fix broadcast link synchronization problem
  ibmvnic: Fix missing brackets in init_sub_crq_irqs
  ibmvnic: Fix releasing of sub-CRQ IRQs in interrupt context
  Revert "ibmvnic: Fix releasing of sub-CRQ IRQs in interrupt context"
  arch/powerpc: Update parameters for csum_tcpudp_magic & csum_tcpudp_nofold
  net/mlx4_en: Save slave ethtool stats command
  net/mlx4_en: Fix potential deadlock in port statistics flow
  net/mlx4: Fix firmware command timeout during interrupt test
  net/mlx4_core: Do not access comm channel if it has not yet been initialized
  net/mlx4_en: Fix panic during reboot
  net/mlx4_en: Process all completions in RX rings after port goes up
  net/mlx4_en: Resolve dividing by zero in 32-bit system
  net/mlx4_core: Change the default value of enable_qos
  net/mlx4_core: Avoid setting ports to auto when only one port type is supported
  net/mlx4_core: Fix the resource-type enum in res tracker to conform to FW spec
  ...

Documentation/devicetree/bindings/net/marvell-orion-net.txt

@@ -49,6 +49,7 @@ Optional port properties:
 and
 
  - phy-handle: See ethernet.txt file in the same directory.
+ - phy-mode: See ethernet.txt file in the same directory.
 
 or
 

Documentation/networking/netdev-FAQ.txt

@@ -29,8 +29,8 @@ A: There are always two trees (git repositories) in play.  Both are driven
    Linus, and net-next is where the new code goes for the future release.
    You can find the trees here:
 
-	http://git.kernel.org/?p=linux/kernel/git/davem/net.git
-	http://git.kernel.org/?p=linux/kernel/git/davem/net-next.git
+        https://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
+        https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
 
 Q: How often do changes from these trees make it to the mainline Linus tree?
 
@@ -76,7 +76,7 @@ Q: So where are we now in this cycle?
 
 A: Load the mainline (Linus) page here:
 
-	http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git
+	https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
 
    and note the top of the "tags" section.  If it is rc1, it is early
    in the dev cycle.  If it was tagged rc7 a week ago, then a release
@@ -123,7 +123,7 @@ A: Normally Greg Kroah-Hartman collects stable commits himself, but
 
    It contains the patches which Dave has selected, but not yet handed
    off to Greg.  If Greg already has the patch, then it will be here:
-	http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git
+	https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git
 
    A quick way to find whether the patch is in this stable-queue is
    to simply clone the repo, and then git grep the mainline commit ID, e.g.

Documentation/networking/nf_conntrack-sysctl.txt

@@ -33,24 +33,6 @@ nf_conntrack_events - BOOLEAN
 	If this option is enabled, the connection tracking code will
 	provide userspace with connection tracking events via ctnetlink.
 
-nf_conntrack_events_retry_timeout - INTEGER (seconds)
-	default 15
-
-	This option is only relevant when "reliable connection tracking
-	events" are used.  Normally, ctnetlink is "lossy", that is,
-	events are normally dropped when userspace listeners can't keep up.
-
-	Userspace can request "reliable event mode".  When this mode is
-	active, the conntrack will only be destroyed after the event was
-	delivered.  If event delivery fails, the kernel periodically
-	re-tries to send the event to userspace.
-
-	This is the maximum interval the kernel should use when re-trying
-	to deliver the destroy event.
-
-	A higher number means there will be fewer delivery retries and it
-	will take longer for a backlog to be processed.
-
 nf_conntrack_expect_max - INTEGER
 	Maximum size of expectation table.  Default value is
 	nf_conntrack_buckets / 256. Minimum is 1.

MAINTAINERS

@@ -2552,15 +2552,18 @@ S:	Supported
 F:	drivers/net/ethernet/broadcom/genet/
 
 BROADCOM BNX2 GIGABIT ETHERNET DRIVER
-M:	Sony Chacko <[email protected]>
-M:	[email protected]
+M:	Rasesh Mody <[email protected]>
+M:	Harish Patil <[email protected]>
+M:	[email protected]
 L:	[email protected]
 S:	Supported
 F:	drivers/net/ethernet/broadcom/bnx2.*
 F:	drivers/net/ethernet/broadcom/bnx2_*
 
 BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
-M:	Ariel Elior <[email protected]>
+M:	Yuval Mintz <[email protected]>
+M:	Ariel Elior <[email protected]>
+M:	[email protected]
 L:	[email protected]
 S:	Supported
 F:	drivers/net/ethernet/broadcom/bnx2x/
@@ -2767,7 +2770,9 @@ S:	Supported
 F:	drivers/scsi/bfa/
 
 BROCADE BNA 10 GIGABIT ETHERNET DRIVER
-M:	Rasesh Mody <[email protected]>
+M:	Rasesh Mody <[email protected]>
+M:	Sudarsana Kalluru <[email protected]>
+M:	[email protected]
 L:	[email protected]
 S:	Supported
 F:	drivers/net/ethernet/brocade/bna/
@@ -8517,11 +8522,10 @@ F:	Documentation/devicetree/bindings/net/wireless/
 F:	drivers/net/wireless/
 
 NETXEN (1/10) GbE SUPPORT
-M:	Manish Chopra <manish.chopra@qlogic.com>
-M:	Sony Chacko <sony.chacko@qlogic.com>
-M:	Rajesh Borundia <rajesh.borundia@qlogic.com>
+M:	Manish Chopra <manish.chopra@cavium.com>
+M:	Rahul Verma <rahul.verma@cavium.com>
+M:	Dept-GELinuxNICDev@cavium.com
 L:	[email protected]
-W:	http://www.qlogic.com
 S:	Supported
 F:	drivers/net/ethernet/qlogic/netxen/
 
@@ -9897,33 +9901,32 @@ F:	Documentation/scsi/LICENSE.qla4xxx
 F:	drivers/scsi/qla4xxx/
 
 QLOGIC QLA3XXX NETWORK DRIVER
-M:	Jitendra Kalsaria <[email protected]>
-M:	Ron Mercer <[email protected]>
-M:	[email protected]
+M:	[email protected]
 L:	[email protected]
 S:	Supported
 F:	Documentation/networking/LICENSE.qla3xxx
 F:	drivers/net/ethernet/qlogic/qla3xxx.*
 
 QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
-M:	[email protected]
+M:	Harish Patil <[email protected]>
+M:	Manish Chopra <[email protected]>
+M:	[email protected]
 L:	[email protected]
 S:	Supported
 F:	drivers/net/ethernet/qlogic/qlcnic/
 
 QLOGIC QLGE 10Gb ETHERNET DRIVER
-M:	Harish Patil <[email protected]>
-M:	Sudarsana Kalluru <[email protected]>
-M:	[email protected]
-M:	[email protected]
+M:	Harish Patil <[email protected]>
+M:	Manish Chopra <[email protected]>
+M:	[email protected]
 L:	[email protected]
 S:	Supported
 F:	drivers/net/ethernet/qlogic/qlge/
 
 QLOGIC QL4xxx ETHERNET DRIVER
-M:	Yuval Mintz <Yuval.Mintz@qlogic.com>
-M:	Ariel Elior <Ariel.Elior@qlogic.com>
-M:	everest-linux-l2@qlogic.com
+M:	Yuval Mintz <Yuval.Mintz@cavium.com>
+M:	Ariel Elior <Ariel.Elior@cavium.com>
+M:	everest-linux-l2@cavium.com
 L:	[email protected]
 S:	Supported
 F:	drivers/net/ethernet/qlogic/qed/

arch/powerpc/include/asm/checksum.h

@@ -53,10 +53,8 @@ static inline __sum16 csum_fold(__wsum sum)
 	return (__force __sum16)(~((__force u32)sum + tmp) >> 16);
 }
 
-static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-                                     unsigned short len,
-                                     unsigned short proto,
-                                     __wsum sum)
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len,
+					__u8 proto, __wsum sum)
 {
 #ifdef __powerpc64__
 	unsigned long s = (__force u32)sum;
@@ -83,10 +81,8 @@ static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
  * computes the checksum of the TCP/UDP pseudo-header
  * returns a 16-bit checksum, already complemented
  */
-static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-					unsigned short len,
-					unsigned short proto,
-					__wsum sum)
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, __u32 len,
+					__u8 proto, __wsum sum)
 {
 	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
 }

drivers/bluetooth/btwilink.c

@@ -310,7 +310,7 @@ static int bt_ti_probe(struct platform_device *pdev)
 	BT_DBG("HCI device registered (hdev %p)", hdev);
 
 	dev_set_drvdata(&pdev->dev, hst);
-	return err;
+	return 0;
 }
 
 static int bt_ti_remove(struct platform_device *pdev)

drivers/bluetooth/hci_bcm.c

@@ -643,6 +643,14 @@ static const struct dmi_system_id bcm_wrong_irq_dmi_table[] = {
 		},
 		.driver_data = &acpi_active_low,
 	},
+	{	/* Handle ThinkPad 8 tablets with BCM2E55 chipset ACPI ID */
+		.ident = "Lenovo ThinkPad 8",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "ThinkPad 8"),
+		},
+		.driver_data = &acpi_active_low,
+	},
 	{ }
 };
 

drivers/infiniband/hw/mlx5/main.c

@@ -1019,7 +1019,7 @@ static struct ib_ucontext *mlx5_ib_alloc_ucontext(struct ib_device *ibdev,
 	resp.qp_tab_size = 1 << MLX5_CAP_GEN(dev->mdev, log_max_qp);
 	if (mlx5_core_is_pf(dev->mdev) && MLX5_CAP_GEN(dev->mdev, bf))
 		resp.bf_reg_size = 1 << MLX5_CAP_GEN(dev->mdev, log_bf_reg_size);
-	resp.cache_line_size = L1_CACHE_BYTES;
+	resp.cache_line_size = cache_line_size();
 	resp.max_sq_desc_sz = MLX5_CAP_GEN(dev->mdev, max_wqe_sz_sq);
 	resp.max_rq_desc_sz = MLX5_CAP_GEN(dev->mdev, max_wqe_sz_rq);
 	resp.max_send_wqebb = 1 << MLX5_CAP_GEN(dev->mdev, log_max_qp_sz);

drivers/infiniband/hw/mlx5/qp.c

@@ -52,7 +52,6 @@ enum {
 
 enum {
 	MLX5_IB_SQ_STRIDE	= 6,
-	MLX5_IB_CACHE_LINE_SIZE	= 64,
 };
 
 static const u32 mlx5_ib_opcode[] = {

drivers/infiniband/hw/qedr/Kconfig

@@ -2,6 +2,7 @@ config INFINIBAND_QEDR
 	tristate "QLogic RoCE driver"
 	depends on 64BIT && QEDE
 	select QED_LL2
+	select QED_RDMA
 	---help---
 	  This driver provides low-level InfiniBand over Ethernet
 	  support for QLogic QED host channel adapters (HCAs).

drivers/infiniband/ulp/ipoib/ipoib.h

@@ -63,6 +63,8 @@ enum ipoib_flush_level {
 
 enum {
 	IPOIB_ENCAP_LEN		  = 4,
+	IPOIB_PSEUDO_LEN	  = 20,
+	IPOIB_HARD_LEN		  = IPOIB_ENCAP_LEN + IPOIB_PSEUDO_LEN,
 
 	IPOIB_UD_HEAD_SIZE	  = IB_GRH_BYTES + IPOIB_ENCAP_LEN,
 	IPOIB_UD_RX_SG		  = 2, /* max buffer needed for 4K mtu */
@@ -134,15 +136,21 @@ struct ipoib_header {
 	u16	reserved;
 };
 
-struct ipoib_cb {
-	struct qdisc_skb_cb	qdisc_cb;
-	u8			hwaddr[INFINIBAND_ALEN];
+struct ipoib_pseudo_header {
+	u8	hwaddr[INFINIBAND_ALEN];
 };
 
-static inline struct ipoib_cb *ipoib_skb_cb(const struct sk_buff *skb)
+static inline void skb_add_pseudo_hdr(struct sk_buff *skb)
 {
-	BUILD_BUG_ON(sizeof(skb->cb) < sizeof(struct ipoib_cb));
-	return (struct ipoib_cb *)skb->cb;
+	char *data = skb_push(skb, IPOIB_PSEUDO_LEN);
+
+	/*
+	 * only the ipoib header is present now, make room for a dummy
+	 * pseudo header and set skb field accordingly
+	 */
+	memset(data, 0, IPOIB_PSEUDO_LEN);
+	skb_reset_mac_header(skb);
+	skb_pull(skb, IPOIB_HARD_LEN);
 }
 
 /* Used for all multicast joins (broadcast, IPv4 mcast and IPv6 mcast) */

drivers/infiniband/ulp/ipoib/ipoib_cm.c

@@ -63,6 +63,8 @@ MODULE_PARM_DESC(cm_data_debug_level,
 #define IPOIB_CM_RX_DELAY       (3 * 256 * HZ)
 #define IPOIB_CM_RX_UPDATE_MASK (0x3)
 
+#define IPOIB_CM_RX_RESERVE     (ALIGN(IPOIB_HARD_LEN, 16) - IPOIB_ENCAP_LEN)
+
 static struct ib_qp_attr ipoib_cm_err_attr = {
 	.qp_state = IB_QPS_ERR
 };
@@ -146,15 +148,15 @@ static struct sk_buff *ipoib_cm_alloc_rx_skb(struct net_device *dev,
 	struct sk_buff *skb;
 	int i;
 
-	skb = dev_alloc_skb(IPOIB_CM_HEAD_SIZE + 12);
+	skb = dev_alloc_skb(ALIGN(IPOIB_CM_HEAD_SIZE + IPOIB_PSEUDO_LEN, 16));
 	if (unlikely(!skb))
 		return NULL;
 
 	/*
-	 * IPoIB adds a 4 byte header. So we need 12 more bytes to align the
+	 * IPoIB adds a IPOIB_ENCAP_LEN byte header, this will align the
 	 * IP header to a multiple of 16.
 	 */
-	skb_reserve(skb, 12);
+	skb_reserve(skb, IPOIB_CM_RX_RESERVE);
 
 	mapping[0] = ib_dma_map_single(priv->ca, skb->data, IPOIB_CM_HEAD_SIZE,
 				       DMA_FROM_DEVICE);
@@ -624,9 +626,9 @@ void ipoib_cm_handle_rx_wc(struct net_device *dev, struct ib_wc *wc)
 	if (wc->byte_len < IPOIB_CM_COPYBREAK) {
 		int dlen = wc->byte_len;
 
-		small_skb = dev_alloc_skb(dlen + 12);
+		small_skb = dev_alloc_skb(dlen + IPOIB_CM_RX_RESERVE);
 		if (small_skb) {
-			skb_reserve(small_skb, 12);
+			skb_reserve(small_skb, IPOIB_CM_RX_RESERVE);
 			ib_dma_sync_single_for_cpu(priv->ca, rx_ring[wr_id].mapping[0],
 						   dlen, DMA_FROM_DEVICE);
 			skb_copy_from_linear_data(skb, small_skb->data, dlen);
@@ -663,8 +665,7 @@ void ipoib_cm_handle_rx_wc(struct net_device *dev, struct ib_wc *wc)
 
 copied:
 	skb->protocol = ((struct ipoib_header *) skb->data)->proto;
-	skb_reset_mac_header(skb);
-	skb_pull(skb, IPOIB_ENCAP_LEN);
+	skb_add_pseudo_hdr(skb);
 
 	++dev->stats.rx_packets;
 	dev->stats.rx_bytes += skb->len;

drivers/infiniband/ulp/ipoib/ipoib_ib.c

@@ -128,16 +128,15 @@ static struct sk_buff *ipoib_alloc_rx_skb(struct net_device *dev, int id)
 
 	buf_size = IPOIB_UD_BUF_SIZE(priv->max_ib_mtu);
 
-	skb = dev_alloc_skb(buf_size + IPOIB_ENCAP_LEN);
+	skb = dev_alloc_skb(buf_size + IPOIB_HARD_LEN);
 	if (unlikely(!skb))
 		return NULL;
 
 	/*
-	 * IB will leave a 40 byte gap for a GRH and IPoIB adds a 4 byte
-	 * header.  So we need 4 more bytes to get to 48 and align the
-	 * IP header to a multiple of 16.
+	 * the IP header will be at IPOIP_HARD_LEN + IB_GRH_BYTES, that is
+	 * 64 bytes aligned
 	 */
-	skb_reserve(skb, 4);
+	skb_reserve(skb, sizeof(struct ipoib_pseudo_header));
 
 	mapping = priv->rx_ring[id].mapping;
 	mapping[0] = ib_dma_map_single(priv->ca, skb->data, buf_size,
@@ -253,8 +252,7 @@ static void ipoib_ib_handle_rx_wc(struct net_device *dev, struct ib_wc *wc)
 	skb_pull(skb, IB_GRH_BYTES);
 
 	skb->protocol = ((struct ipoib_header *) skb->data)->proto;
-	skb_reset_mac_header(skb);
-	skb_pull(skb, IPOIB_ENCAP_LEN);
+	skb_add_pseudo_hdr(skb);
 
 	++dev->stats.rx_packets;
 	dev->stats.rx_bytes += skb->len;