Merge tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/…

…git/gregkh/tty Pull tty/serial updates from Greg KH: "Here's the big tty/serial driver pull request for 4.6-rc1. Lots of changes in here, Peter has been on a tear again, with lots of refactoring and bugs fixes, many thanks to the great work he has been doing. Lots of driver updates and fixes as well, full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (220 commits) serial: 8250: describe CONFIG_SERIAL_8250_RSA serial: samsung: optimize UART rx fifo access routine serial: pl011: add mark/space parity support serial: sa1100: make sa1100_register_uart_fns a function tty: serial: 8250: add MOXA Smartio MUE boards support serial: 8250: convert drivers to use up_to_u8250p() serial: 8250/mediatek: fix building with SERIAL_8250=m serial: 8250/ingenic: fix building with SERIAL_8250=m serial: 8250/uniphier: fix modular build Revert "drivers/tty/serial: make 8250/8250_ingenic.c explicitly non-modular" Revert "drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular" serial: mvebu-uart: initial support for Armada-3700 serial port serial: mctrl_gpio: Add missing module license serial: ifx6x60: avoid uninitialized variable use tty/serial: at91: fix bad offset for UART timeout register tty/serial: at91: restore dynamic driver binding serial: 8250: Add hardware dependency to RT288X option TTY, devpts: document pty count limiting tty: goldfish: support platform_device with id -1 drivers: tty: goldfish: Add device tree bindings ...
oohal · Mar 17, 2016 · 96b9b1c · 96b9b1c
2 parents 8eee93e + a95fc9c
commit 96b9b1c
Show file tree

Hide file tree

Showing 139 changed files with 3,447 additions and 3,701 deletions.
diff --git a/Documentation/devicetree/bindings/goldfish/tty.txt b/Documentation/devicetree/bindings/goldfish/tty.txt
@@ -0,0 +1,17 @@
+Android Goldfish TTY
+
+Android goldfish tty device generated by android emulator.
+
+Required properties:
+
+- compatible : should contain "google,goldfish-tty" to match emulator
+- reg        : <registers mapping>
+- interrupts : <interrupt mapping>
+
+Example:
+
+	goldfish_tty@1f004000 {
+		compatible = "google,goldfish-tty";
+		reg = <0x1f004000 0x1000>;
+		interrupts = <0xc>;
+	};
diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt
@@ -0,0 +1,18 @@
+* BCM2835 AUXILIAR UART
+
+Required properties:
+
+- compatible: "brcm,bcm2835-aux-uart"
+- reg: The base address of the UART register bank.
+- interrupts: A single interrupt specifier.
+- clocks: Clock driving the hardware; used to figure out the baud rate
+  divisor.
+
+Example:
+
+	uart1: serial@7e215040 {
+		compatible = "brcm,bcm2835-aux-uart";
+		reg = <0x7e215040 0x40>;
+		interrupts = <1 29>;
+		clocks = <&aux BCM2835_AUX_CLOCK_UART>;
+	};
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -19,6 +19,8 @@ Required properties:
     - "renesas,scifa-r8a7791" for R8A7791 (R-Car M2-W) SCIFA compatible UART.
     - "renesas,scifb-r8a7791" for R8A7791 (R-Car M2-W) SCIFB compatible UART.
     - "renesas,hscif-r8a7791" for R8A7791 (R-Car M2-W) HSCIF compatible UART.
+    - "renesas,scif-r8a7792" for R8A7792 (R-Car V2H) SCIF compatible UART.
+    - "renesas,hscif-r8a7792" for R8A7792 (R-Car V2H) HSCIF compatible UART.
     - "renesas,scif-r8a7793" for R8A7793 (R-Car M2-N) SCIF compatible UART.
     - "renesas,scifa-r8a7793" for R8A7793 (R-Car M2-N) SCIFA compatible UART.
     - "renesas,scifb-r8a7793" for R8A7793 (R-Car M2-N) SCIFB compatible UART.

diff --git a/Documentation/devicetree/bindings/tty/serial/mvebu-uart.txt b/Documentation/devicetree/bindings/tty/serial/mvebu-uart.txt
@@ -0,0 +1,13 @@
+* Marvell UART : Non standard UART used in some of Marvell EBU SoCs (e.g., Armada-3700)
+
+Required properties:
+- compatible: "marvell,armada-3700-uart"
+- reg: offset and length of the register set for the device.
+- interrupts: device interrupt
+
+Example:
+	serial@12000 {
+		compatible = "marvell,armada-3700-uart";
+		reg = <0x12000 0x400>;
+		interrupts = <43>;
+	};
diff --git a/Documentation/filesystems/devpts.txt b/Documentation/filesystems/devpts.txt
@@ -51,6 +51,15 @@ where 'ns_exec -cm /bin/bash' calls clone() with CLONE_NEWNS flag and execs
 /bin/bash in the child process.  A pty created by the sshd is not visible in
 the original mount of /dev/pts.
 
+Total count of pty pairs in all instances is limited by sysctls:
+kernel.pty.max = 4096		- global limit
+kernel.pty.reserve = 1024	- reserve for initial instance
+kernel.pty.nr			- current count of ptys
+
+Per-instance limit could be set by adding mount option "max=<count>".
+This feature was added in kernel 3.4 together with sysctl kernel.pty.reserve.
+In kernels older than 3.4 sysctl kernel.pty.max works as per-instance limit.
+
 User-space changes
 ------------------
 

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
@@ -1064,6 +1064,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			A valid base address must be provided, and the serial
 			port must already be setup and configured.
 
+		armada3700_uart,<addr>
+			Start an early, polled-mode console on the
+			Armada 3700 serial port at the specified
+			address. The serial port must already be setup
+			and configured. Options are not yet supported.
+
 	earlyprintk=	[X86,SH,BLACKFIN,ARM,M68k]
 			earlyprintk=vga
 			earlyprintk=efi

diff --git a/Documentation/serial/tty.txt b/Documentation/serial/tty.txt
@@ -72,9 +72,6 @@ flush_buffer()	-	(optional) May be called at any point between
 			open and close, and instructs the line discipline
 			to empty its input buffer.
 
-chars_in_buffer() -	(optional) Report the number of bytes in the input
-			buffer.
-
 set_termios()	-	(optional) Called on termios structure changes.
 			The caller passes the old termios data and the
 			current data is in the tty. Called under the

diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
@@ -66,6 +66,7 @@ show up in /proc/sys/kernel:
 - printk_delay
 - printk_ratelimit
 - printk_ratelimit_burst
+- pty                         ==> Documentation/filesystems/devpts.txt
 - randomize_va_space
 - real-root-dev               ==> Documentation/initrd.txt
 - reboot-cmd                  [ SPARC only ]

diff --git a/MAINTAINERS b/MAINTAINERS
@@ -6068,7 +6068,7 @@ S:	Maintained
 F:	drivers/media/platform/rcar_jpu.c
 
 JSM Neo PCI based serial card
-M:	Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
+M:	Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
 L:	[email protected]
 S:	Maintained
 F:	drivers/tty/serial/jsm/

diff --git a/arch/alpha/include/asm/serial.h b/arch/alpha/include/asm/serial.h
@@ -14,11 +14,11 @@
 
 /* Standard COM flags (except for COM4, because of the 8514 problem) */
 #ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ)
+#define STD_COM4_FLAGS (UPF_BOOT_AUTOCONF | UPF_AUTO_IRQ)
 #else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
+#define STD_COM4_FLAGS UPF_BOOT_AUTOCONF
 #endif
 
 #define SERIAL_PORT_DFNS			\

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
@@ -252,7 +252,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
 		info = omap_serial_default_info;
 
 	oh = uart->oh;
-	name = DRIVER_NAME;
+	name = OMAP_SERIAL_DRIVER_NAME;
 
 	omap_up.dma_enabled = info->dma_enabled;
 	omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;

diff --git a/arch/frv/include/asm/serial.h b/arch/frv/include/asm/serial.h
@@ -13,6 +13,6 @@
  */
 #define BASE_BAUD 0
 
-#define STD_COM_FLAGS		ASYNC_BOOT_AUTOCONF
+#define STD_COM_FLAGS		UPF_BOOT_AUTOCONF
 
 #define SERIAL_PORT_DFNS
diff --git a/arch/ia64/kernel/unaligned.c b/arch/ia64/kernel/unaligned.c
@@ -1336,8 +1336,11 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 			 * Don't call tty_write_message() if we're in the kernel; we might
 			 * be holding locks...
 			 */
-			if (user_mode(regs))
-				tty_write_message(current->signal->tty, buf);
+			if (user_mode(regs)) {
+				struct tty_struct *tty = get_current_tty();
+				tty_write_message(tty, buf);
+				tty_kref_put(tty);
+			}
 			buf[len-1] = '\0';	/* drop '\r' */
 			/* watch for command names containing %s */
 			printk(KERN_WARNING "%s", buf);

diff --git a/arch/m68k/include/asm/serial.h b/arch/m68k/include/asm/serial.h
@@ -18,11 +18,11 @@
 
 /* Standard COM flags (except for COM4, because of the 8514 problem) */
 #ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ)
+#define STD_COM4_FLAGS (UPF_BOOT_AUTOCONF | UPF_AUTO_IRQ)
 #else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
+#define STD_COM4_FLAGS UPF_BOOT_AUTOCONF
 #endif
 
 #ifdef CONFIG_ISA

diff --git a/arch/mips/pmcs-msp71xx/msp_serial.c b/arch/mips/pmcs-msp71xx/msp_serial.c
@@ -110,7 +110,7 @@ void __init msp_serial_setup(void)
 	up.uartclk	= uartclk;
 	up.regshift	= 2;
 	up.iotype	= UPIO_MEM;
-	up.flags	= ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	up.flags	= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
 	up.type		= PORT_16550A;
 	up.line		= 0;
 	up.serial_out	= msp_serial_out;

diff --git a/arch/mn10300/include/asm/serial.h b/arch/mn10300/include/asm/serial.h
@@ -14,15 +14,15 @@
 
 /* Standard COM flags (except for COM4, because of the 8514 problem) */
 #ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define STD_COM_FLAGS	(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS	(ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#define STD_COM_FLAGS	(UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ)
+#define STD_COM4_FLAGS	(UPF_BOOT_AUTOCONF | UPF_AUTO_IRQ)
 #else
-#define STD_COM_FLAGS	(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS	ASYNC_BOOT_AUTOCONF
+#define STD_COM_FLAGS	(UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
+#define STD_COM4_FLAGS	UPF_BOOT_AUTOCONF
 #endif
 
 #ifdef CONFIG_SERIAL_8250_MANY_PORTS
-#define FOURPORT_FLAGS	ASYNC_FOURPORT
+#define FOURPORT_FLAGS	UPF_FOURPORT
 #define ACCENT_FLAGS	0
 #define BOCA_FLAGS	0
 #define HUB6_FLAGS	0

diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
@@ -28,10 +28,6 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 
-#ifdef SERIAL_INLINE
-#define _INLINE_ inline
-#endif
-
 #define SERIAL_MAX_NUM_LINES 1
 #define SERIAL_TIMER_VALUE (HZ / 10)
 

diff --git a/arch/xtensa/platforms/xt2000/setup.c b/arch/xtensa/platforms/xt2000/setup.c
@@ -113,7 +113,7 @@ void platform_heartbeat(void)
 }
 
 //#define RS_TABLE_SIZE 2
-//#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
+//#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF|UPF_SKIP_TEST)
 
 #define _SERIAL_PORT(_base,_irq)					\
 {									\

diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
@@ -1349,7 +1349,7 @@ static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty)
 	/* TODO:disable interrupts instead of reset to preserve signal states */
 	reset_device(info);
 
-	if (!tty || tty->termios.c_cflag & HUPCL) {
+	if (!tty || C_HUPCL(tty)) {
 		info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
 		set_signals(info);
 	}
@@ -1390,7 +1390,7 @@ static void mgslpc_program_hw(MGSLPC_INFO *info, struct tty_struct *tty)
 	port_irq_enable(info, (unsigned char) PVR_DSR | PVR_RI);
 	get_signals(info);
 
-	if (info->netcount || (tty && (tty->termios.c_cflag & CREAD)))
+	if (info->netcount || (tty && C_CREAD(tty)))
 		rx_start(info);
 
 	spin_unlock_irqrestore(&info->lock, flags);
@@ -1733,7 +1733,7 @@ static void mgslpc_throttle(struct tty_struct * tty)
 	if (I_IXOFF(tty))
 		mgslpc_send_xchar(tty, STOP_CHAR(tty));
 
-	if (tty->termios.c_cflag & CRTSCTS) {
+	if (C_CRTSCTS(tty)) {
 		spin_lock_irqsave(&info->lock, flags);
 		info->serial_signals &= ~SerialSignal_RTS;
 		set_signals(info);
@@ -1762,7 +1762,7 @@ static void mgslpc_unthrottle(struct tty_struct * tty)
 			mgslpc_send_xchar(tty, START_CHAR(tty));
 	}
 
-	if (tty->termios.c_cflag & CRTSCTS) {
+	if (C_CRTSCTS(tty)) {
 		spin_lock_irqsave(&info->lock, flags);
 		info->serial_signals |= SerialSignal_RTS;
 		set_signals(info);
@@ -2306,30 +2306,25 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term
 	mgslpc_change_params(info, tty);
 
 	/* Handle transition to B0 status */
-	if (old_termios->c_cflag & CBAUD &&
-	    !(tty->termios.c_cflag & CBAUD)) {
+	if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) {
 		info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
 		spin_lock_irqsave(&info->lock, flags);
 		set_signals(info);
 		spin_unlock_irqrestore(&info->lock, flags);
 	}
 
 	/* Handle transition away from B0 status */
-	if (!(old_termios->c_cflag & CBAUD) &&
-	    tty->termios.c_cflag & CBAUD) {
+	if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) {
 		info->serial_signals |= SerialSignal_DTR;
-		if (!(tty->termios.c_cflag & CRTSCTS) ||
-		    !test_bit(TTY_THROTTLED, &tty->flags)) {
+		if (!C_CRTSCTS(tty) || !test_bit(TTY_THROTTLED, &tty->flags))
 			info->serial_signals |= SerialSignal_RTS;
-		}
 		spin_lock_irqsave(&info->lock, flags);
 		set_signals(info);
 		spin_unlock_irqrestore(&info->lock, flags);
 	}
 
 	/* Handle turning off CRTSCTS */
-	if (old_termios->c_cflag & CRTSCTS &&
-	    !(tty->termios.c_cflag & CRTSCTS)) {
+	if (old_termios->c_cflag & CRTSCTS && !C_CRTSCTS(tty)) {
 		tty->hw_stopped = 0;
 		tx_release(tty);
 	}

diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
@@ -171,7 +171,7 @@ static const struct tty_operations ttyprintk_ops = {
 	.ioctl = tpk_ioctl,
 };
 
-static struct tty_port_operations null_ops = { };
+static const struct tty_port_operations null_ops = { };
 
 static struct tty_driver *ttyprintk_driver;
 

diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
@@ -1572,7 +1572,7 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
 #endif
 		return;
 	}
-	port->flags |= ASYNC_CLOSING;
+	info->closing = 1;
 
 	tty->closing = 1;
 	/*
@@ -1603,6 +1603,7 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
 	info->ncarrier = 0;
 
 	tty_port_close_end(port, tty);
+	info->closing = 0;
 #ifdef ISDN_DEBUG_MODEM_OPEN
 	printk(KERN_DEBUG "isdn_tty_close normal exit\n");
 #endif
@@ -2236,7 +2237,7 @@ isdn_tty_at_cout(char *msg, modem_info *info)
 	l = strlen(msg);
 
 	spin_lock_irqsave(&info->readlock, flags);
-	if (port->flags & ASYNC_CLOSING) {
+	if (info->closing) {
 		spin_unlock_irqrestore(&info->readlock, flags);
 		return;
 	}
@@ -2386,13 +2387,12 @@ isdn_tty_modem_result(int code, modem_info *info)
 	case RESULT_NO_CARRIER:
 #ifdef ISDN_DEBUG_MODEM_HUP
 		printk(KERN_DEBUG "modem_result: NO CARRIER %d %d\n",
-		       (info->port.flags & ASYNC_CLOSING),
-		       (!info->port.tty));
+		       info->closing, !info->port.tty);
 #endif
 		m->mdmreg[REG_RINGCNT] = 0;
 		del_timer(&info->nc_timer);
 		info->ncarrier = 0;
-		if ((info->port.flags & ASYNC_CLOSING) || (!info->port.tty))
+		if (info->closing || !info->port.tty)
 			return;
 
 #ifdef CONFIG_ISDN_AUDIO
@@ -2525,7 +2525,7 @@ isdn_tty_modem_result(int code, modem_info *info)
 		}
 	}
 	if (code == RESULT_NO_CARRIER) {
-		if ((info->port.flags & ASYNC_CLOSING) || (!info->port.tty))
+		if (info->closing || (!info->port.tty))
 			return;
 
 		if (info->port.flags & ASYNC_CHECK_CD)