Merge tag 'powerpc-4.14-1' of git://git.kernel.org/pub/scm/linux/kern…

…el/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Nothing really major this release, despite quite a lot of activity.
  Just lots of things all over the place.

  Some things of note include:

   - Access via perf to a new type of PMU (IMC) on Power9, which can
     count both core events as well as nest unit events (Memory
     controller etc).

   - Optimisations to the radix MMU TLB flushing, mostly to avoid
     unnecessary Page Walk Cache (PWC) flushes when the structure of the
     tree is not changing.

   - Reworks/cleanups of do_page_fault() to modernise it and bring it
     closer to other architectures where possible.

   - Rework of our page table walking so that THP updates only need to
     send IPIs to CPUs where the affected mm has run, rather than all
     CPUs.

   - The size of our vmalloc area is increased to 56T on 64-bit hash MMU
     systems. This avoids problems with the percpu allocator on systems
     with very sparse NUMA layouts.

   - STRICT_KERNEL_RWX support on PPC32.

   - A new sched domain topology for Power9, to capture the fact that
     pairs of cores may share an L2 cache.

   - Power9 support for VAS, which is a new mechanism for accessing
     coprocessors, and initial support for using it with the NX
     compression accelerator.

   - Major work on the instruction emulation support, adding support for
     many new instructions, and reworking it so it can be used to
     implement the emulation needed to fixup alignment faults.

   - Support for guests under PowerVM to use the Power9 XIVE interrupt
     controller.

  And probably that many things again that are almost as interesting,
  but I had to keep the list short. Plus the usual fixes and cleanups as
  always.

  Thanks to: Alexey Kardashevskiy, Alistair Popple, Andreas Schwab,
  Aneesh Kumar K.V, Anju T Sudhakar, Arvind Yadav, Balbir Singh,
  Benjamin Herrenschmidt, Bhumika Goyal, Breno Leitao, Bryant G. Ly,
  Christophe Leroy, Cédric Le Goater, Dan Carpenter, Dou Liyang,
  Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Hannes
  Reinecke, Haren Myneni, Ivan Mikhaylov, John Allen, Julia Lawall,
  LABBE Corentin, Laurentiu Tudor, Madhavan Srinivasan, Markus Elfring,
  Masahiro Yamada, Matt Brown, Michael Neuling, Murilo Opsfelder Araujo,
  Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran,
  Paul Mackerras, Rashmica Gupta, Rob Herring, Rui Teng, Sam Bobroff,
  Santosh Sivaraj, Scott Wood, Shilpasri G Bhat, Sukadev Bhattiprolu,
  Suraj Jitindar Singh, Tobin C. Harding, Victor Aoqui"

* tag 'powerpc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (321 commits)
  powerpc/xive: Fix section __init warning
  powerpc: Fix kernel crash in emulation of vector loads and stores
  powerpc/xive: improve debugging macros
  powerpc/xive: add XIVE Exploitation Mode to CAS
  powerpc/xive: introduce H_INT_ESB hcall
  powerpc/xive: add the HW IRQ number under xive_irq_data
  powerpc/xive: introduce xive_esb_write()
  powerpc/xive: rename xive_poke_esb() in xive_esb_read()
  powerpc/xive: guest exploitation of the XIVE interrupt controller
  powerpc/xive: introduce a common routine xive_queue_page_alloc()
  powerpc/sstep: Avoid used uninitialized error
  axonram: Return directly after a failed kzalloc() in axon_ram_probe()
  axonram: Improve a size determination in axon_ram_probe()
  axonram: Delete an error message for a failed memory allocation in axon_ram_probe()
  powerpc/powernv/npu: Move tlb flush before launching ATSD
  powerpc/macintosh: constify wf_sensor_ops structures
  powerpc/iommu: Use permission-specific DEVICE_ATTR variants
  powerpc/eeh: Delete an error out of memory message at init time
  powerpc/mm: Use seq_putc() in two functions
  macintosh: Convert to using %pOF instead of full_name
  ...

Documentation/ABI/testing/ppc-memtrace

@@ -0,0 +1,45 @@
+What:		/sys/kernel/debug/powerpc/memtrace
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	[email protected]
+Description:	This folder contains the relevant debugfs files for the
+		hardware trace macro to use. CONFIG_PPC64_HARDWARE_TRACING
+		must be set.
+
+What:		/sys/kernel/debug/powerpc/memtrace/enable
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	[email protected]
+Description:	Write an integer containing the size in bytes of the memory
+		you want removed from each NUMA node to this file - it must be
+		aligned to the memblock size. This amount of RAM will be removed
+		from the kernel mappings and the following debugfs files will be
+		created. This can only be successfully done once per boot. Once
+		memory is successfully removed from each node, the following
+		files are created.
+
+What:		/sys/kernel/debug/powerpc/memtrace/<node-id>
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	[email protected]
+Description:	This directory contains information about the removed memory
+		from the specific NUMA node.
+
+What:		/sys/kernel/debug/powerpc/memtrace/<node-id>/size
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	[email protected]
+Description:	This contains the size of the memory removed from the node.
+
+What:		/sys/kernel/debug/powerpc/memtrace/<node-id>/start
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	[email protected]
+Description:	This contains the start address of the removed memory.
+
+What:		/sys/kernel/debug/powerpc/memtrace/<node-id>/trace
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	[email protected]
+Description:	This is where the hardware trace macro will output the trace
+		it generates.

Documentation/ABI/testing/sysfs-firmware-opal-powercap

@@ -0,0 +1,31 @@
+What:		/sys/firmware/opal/powercap
+Date:		August 2017
+Contact:	Linux for PowerPC mailing list <[email protected]>
+Description:	Powercap directory for Powernv (P8, P9) servers
+
+		Each folder in this directory contains a
+		power-cappable component.
+
+What:		/sys/firmware/opal/powercap/system-powercap
+		/sys/firmware/opal/powercap/system-powercap/powercap-min
+		/sys/firmware/opal/powercap/system-powercap/powercap-max
+		/sys/firmware/opal/powercap/system-powercap/powercap-current
+Date:		August 2017
+Contact:	Linux for PowerPC mailing list <[email protected]>
+Description:	System powercap directory and attributes applicable for
+		Powernv (P8, P9) servers
+
+		This directory provides powercap information. It
+		contains below sysfs attributes:
+
+		- powercap-min : This file provides the minimum
+		  possible powercap in Watt units
+
+		- powercap-max : This file provides the maximum
+		  possible powercap in Watt units
+
+		- powercap-current : This file provides the current
+		  powercap set on the system. Writing to this file
+		  creates a request for setting a new-powercap. The
+		  powercap requested must be between powercap-min
+		  and powercap-max.

Documentation/ABI/testing/sysfs-firmware-opal-psr

@@ -0,0 +1,18 @@
+What:		/sys/firmware/opal/psr
+Date:		August 2017
+Contact:	Linux for PowerPC mailing list <[email protected]>
+Description:	Power-Shift-Ratio directory for Powernv P9 servers
+
+		Power-Shift-Ratio allows to provide hints the firmware
+		to shift/throttle power between different entities in
+		the system. Each attribute in this directory indicates
+		a settable PSR.
+
+What:		/sys/firmware/opal/psr/cpu_to_gpu_X
+Date:		August 2017
+Contact:	Linux for PowerPC mailing list <[email protected]>
+Description:	PSR sysfs attributes for Powernv P9 servers
+
+		Power-Shift-Ratio between CPU and GPU for a given chip
+		with chip-id X. This file gives the ratio (0-100)
+		which is used by OCC for power-capping.

Documentation/devicetree/bindings/powerpc/ibm,vas.txt

@@ -0,0 +1,22 @@
+* IBM Powerpc Virtual Accelerator Switchboard (VAS)
+
+VAS is a hardware mechanism that allows kernel subsystems and user processes
+to directly submit compression and other requests to Nest accelerators (NX)
+or other coprocessors functions.
+
+Required properties:
+- compatible : should be "ibm,vas".
+- ibm,vas-id : A unique identifier for each instance of VAS in the system
+- reg : Should contain 4 pairs of 64-bit fields specifying the Hypervisor
+  window context start and length, OS/User window context start and length,
+  "Paste address" start and length, "Paste window id" start bit and number
+  of bits)
+
+Example:
+
+	vas@6019100000000 {
+		compatible = "ibm,vas", "ibm,power9-vas";
+		reg = <0x6019100000000 0x2000000 0x6019000000000 0x100000000 0x8000000000000 0x100000000 0x20 0x10>;
+		name = "vas";
+		ibm,vas-id = <0x1>;
+	};

Documentation/devicetree/bindings/powerpc/opal/sensor-groups.txt

@@ -0,0 +1,27 @@
+IBM OPAL Sensor Groups Binding
+-------------------------------
+
+Node: /ibm,opal/sensor-groups
+
+Description: Contains sensor groups available in the Powernv P9
+servers. Each child node indicates a sensor group.
+
+- compatible : Should be "ibm,opal-sensor-group"
+
+Each child node contains below properties:
+
+- type : String to indicate the type of sensor-group
+
+- sensor-group-id: Abstract unique identifier provided by firmware of
+		   type <u32> which is used for sensor-group
+		   operations like clearing the min/max history of all
+		   sensors belonging to the group.
+
+- ibm,chip-id : Chip ID
+
+- sensors : Phandle array of child nodes of /ibm,opal/sensor/
+	    belonging to this group
+
+- ops : Array of opal-call numbers indicating available operations on
+	sensor groups like clearing min/max, enabling/disabling sensor
+	group.

MAINTAINERS

@@ -6494,6 +6494,15 @@ L:	[email protected]
 S:	Supported
 F:	drivers/net/ethernet/ibm/ibmvnic.*
 
+IBM Power Virtual Accelerator Switchboard
+M:	Sukadev Bhattiprolu
+L:	[email protected]
+S:	Supported
+F:	arch/powerpc/platforms/powernv/vas*
+F:	arch/powerpc/platforms/powernv/copy-paste.h
+F:	arch/powerpc/include/asm/vas.h
+F:	arch/powerpc/include/uapi/asm/vas.h
+
 IBM Power Virtual Ethernet Device Driver
 M:	Thomas Falcon <[email protected]>
 L:	[email protected]
@@ -7830,6 +7839,7 @@ F:	drivers/pci/hotplug/rpa*
 F:	drivers/rtc/rtc-opal.c
 F:	drivers/scsi/ibmvscsi/
 F:	drivers/tty/hvc/hvc_opal.c
+F:	drivers/watchdog/wdrtas.c
 F:	tools/testing/selftests/powerpc
 N:	/pmac
 N:	powermac

arch/powerpc/Kconfig

@@ -85,6 +85,17 @@ config NMI_IPI
 	depends on SMP && (DEBUGGER || KEXEC_CORE || HARDLOCKUP_DETECTOR)
 	default y
 
+config PPC_WATCHDOG
+	bool
+	depends on HARDLOCKUP_DETECTOR
+	depends on HAVE_HARDLOCKUP_DETECTOR_ARCH
+	default y
+	help
+	  This is a placeholder when the powerpc hardlockup detector
+	  watchdog is selected (arch/powerpc/kernel/watchdog.c). It is
+	  seleted via the generic lockup detector menu which is why we
+	  have no standalone config option for it here.
+
 config STACKTRACE_SUPPORT
 	bool
 	default y
@@ -165,7 +176,7 @@ config PPC
 	select HAVE_ARCH_MMAP_RND_COMPAT_BITS	if COMPAT
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
-	select ARCH_HAS_STRICT_KERNEL_RWX	if (PPC_BOOK3S_64 && !RELOCATABLE && !HIBERNATION)
+	select ARCH_HAS_STRICT_KERNEL_RWX	if ((PPC_BOOK3S_64 || PPC32) && !RELOCATABLE && !HIBERNATION)
 	select ARCH_OPTIONAL_KERNEL_RWX		if ARCH_HAS_STRICT_KERNEL_RWX
 	select HAVE_CBPF_JIT			if !PPC64
 	select HAVE_CONTEXT_TRACKING		if PPC64
@@ -356,10 +367,6 @@ config PPC_ADV_DEBUG_DAC_RANGE
 	depends on PPC_ADV_DEBUG_REGS && 44x
 	default y
 
-config PPC_EMULATE_SSTEP
-	bool
-	default y if KPROBES || UPROBES || XMON || HAVE_HW_BREAKPOINT
-
 config ZONE_DMA32
 	bool
 	default y if PPC64
@@ -394,7 +401,7 @@ config HUGETLB_PAGE_SIZE_VARIABLE
 
 config MATH_EMULATION
 	bool "Math emulation"
-	depends on 4xx || 8xx || PPC_MPC832x || BOOKE
+	depends on 4xx || PPC_8xx || PPC_MPC832x || BOOKE
 	---help---
 	  Some PowerPC chips designed for embedded applications do not have
 	  a floating-point unit and therefore do not implement the
@@ -956,9 +963,9 @@ config PPC_PCI_CHOICE
 
 config PCI
 	bool "PCI support" if PPC_PCI_CHOICE
-	default y if !40x && !CPM2 && !8xx && !PPC_83xx \
+	default y if !40x && !CPM2 && !PPC_8xx && !PPC_83xx \
 		&& !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON
-	default PCI_QSPAN if !4xx && !CPM2 && 8xx
+	default PCI_QSPAN if PPC_8xx
 	select GENERIC_PCI_IOMAP
 	help
 	  Find out whether your system includes a PCI bus. PCI is the name of
@@ -974,7 +981,7 @@ config PCI_SYSCALL
 
 config PCI_QSPAN
 	bool "QSpan PCI"
-	depends on !4xx && !CPM2 && 8xx
+	depends on PPC_8xx
 	select PPC_I8259
 	help
 	  Say Y here if you have a system based on a Motorola 8xx-series
@@ -1165,12 +1172,23 @@ config CONSISTENT_SIZE
 
 config PIN_TLB
 	bool "Pinned Kernel TLBs (860 ONLY)"
-	depends on ADVANCED_OPTIONS && 8xx
+	depends on ADVANCED_OPTIONS && PPC_8xx && \
+		   !DEBUG_PAGEALLOC && !STRICT_KERNEL_RWX
+
+config PIN_TLB_DATA
+	bool "Pinned TLB for DATA"
+	depends on PIN_TLB
+	default y
 
 config PIN_TLB_IMMR
 	bool "Pinned TLB for IMMR"
 	depends on PIN_TLB
 	default y
+
+config PIN_TLB_TEXT
+	bool "Pinned TLB for TEXT"
+	depends on PIN_TLB
+	default y
 endmenu
 
 if PPC64

arch/powerpc/Makefile

@@ -250,7 +250,7 @@ KBUILD_AFLAGS += $(aflags-y)
 KBUILD_CFLAGS += $(cflags-y)
 
 head-y				:= arch/powerpc/kernel/head_$(BITS).o
-head-$(CONFIG_8xx)		:= arch/powerpc/kernel/head_8xx.o
+head-$(CONFIG_PPC_8xx)		:= arch/powerpc/kernel/head_8xx.o
 head-$(CONFIG_40x)		:= arch/powerpc/kernel/head_40x.o
 head-$(CONFIG_44x)		:= arch/powerpc/kernel/head_44x.o
 head-$(CONFIG_FSL_BOOKE)	:= arch/powerpc/kernel/head_fsl_booke.o
@@ -317,6 +317,10 @@ PHONY += ppc64le_defconfig
 ppc64le_defconfig:
 	$(call merge_into_defconfig,ppc64_defconfig,le)
 
+PHONY += powernv_be_defconfig
+powernv_be_defconfig:
+	$(call merge_into_defconfig,powernv_defconfig,be)
+
 PHONY += mpc85xx_defconfig
 mpc85xx_defconfig:
 	$(call merge_into_defconfig,mpc85xx_basic_defconfig,\

arch/powerpc/boot/4xx.c

@@ -564,7 +564,7 @@ void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
 		fbdv = 16;
 	cbdv = ((pllmr & 0x00060000) >> 17) + 1; /* CPU:PLB */
 	opdv = ((pllmr & 0x00018000) >> 15) + 1; /* PLB:OPB */
-	ppdv = ((pllmr & 0x00001800) >> 13) + 1; /* PLB:PCI */
+	ppdv = ((pllmr & 0x00006000) >> 13) + 1; /* PLB:PCI */
 	epdv = ((pllmr & 0x00001800) >> 11) + 2; /* PLB:EBC */
 	udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1;
 

arch/powerpc/boot/Makefile

@@ -107,17 +107,18 @@ src-wlib-y := string.S crt0.S stdio.c decompress.c main.c \
 		$(libfdt) libfdt-wrapper.c \
 		ns16550.c serial.c simple_alloc.c div64.S util.S \
 		elf_util.c $(zlib-y) devtree.c stdlib.c \
-		oflib.c ofconsole.c cuboot.c mpsc.c cpm-serial.c \
-		uartlite.c mpc52xx-psc.c opal.c
+		oflib.c ofconsole.c cuboot.c cpm-serial.c \
+		uartlite.c opal.c
+src-wlib-$(CONFIG_PPC_MPC52XX) += mpc52xx-psc.c
 src-wlib-$(CONFIG_PPC64_BOOT_WRAPPER) +=  opal-calls.S
 ifndef CONFIG_PPC64_BOOT_WRAPPER
 src-wlib-y += crtsavres.S
 endif
 src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c
 src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c
-src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c fsl-soc.c
+src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c
 src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c
-src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c fsl-soc.c
+src-wlib-$(CONFIG_EMBEDDED6xx) += mpsc.c mv64x60.c mv64x60_i2c.c ugecon.c fsl-soc.c
 
 src-plat-y := of.c epapr.c
 src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \
@@ -132,7 +133,7 @@ src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \
 				treeboot-iss4xx.c treeboot-currituck.c \
 				treeboot-akebono.c \
 				simpleboot.c fixed-head.S virtex.c
-src-plat-$(CONFIG_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c
+src-plat-$(CONFIG_PPC_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c
 src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c
 src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c
 src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c

arch/powerpc/boot/crt0.S

@@ -26,17 +26,17 @@ _zimage_start_opd:
 
 #ifdef __powerpc64__
 .balign 8
-p_start:	.llong	_start
-p_etext:	.llong	_etext
-p_bss_start:	.llong	__bss_start
-p_end:		.llong	_end
-
-p_toc:		.llong	__toc_start + 0x8000 - p_base
-p_dyn:		.llong	__dynamic_start - p_base
-p_rela:		.llong	__rela_dyn_start - p_base
-p_prom:		.llong	0
+p_start:	.8byte	_start
+p_etext:	.8byte	_etext
+p_bss_start:	.8byte	__bss_start
+p_end:		.8byte	_end
+
+p_toc:		.8byte	__toc_start + 0x8000 - p_base
+p_dyn:		.8byte	__dynamic_start - p_base
+p_rela:		.8byte	__rela_dyn_start - p_base
+p_prom:		.8byte	0
 	.weak	_platform_stack_top
-p_pstack:	.llong	_platform_stack_top
+p_pstack:	.8byte	_platform_stack_top
 #else
 p_start:	.long	_start
 p_etext:	.long	_etext