Merge tag 'omap-for-v5.6/fixes-rc3-signed' of git://git.kernel.org/pu…

…b/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Few fixes for omaps for v5.6-rc cycle This series of changes contains few code fixes for issues recently discovered: - A build fix for ARMv6 only configs when CONFIG_HAVE_ARM_SMCCC is not set - A fix for ti-sysc quirk handling for 1-wire hdq reset And a handful of dts fixes that I had queued up and should have already sent earlier instead of waiting for the code fixes to get sorted out: - Fix naming of vsys_3v3 regulator for dra7-evm - Fix incorrect OPP node names for am437x-idk-evm - Fix IPU1 mux clock parent source for dra7 - Add missing PWM property for dra7 timers 13 to 16 - Add missing dma-ranges for dra7 PCIe nodes - Fix mmc3 max-frequency for dra76x * tag 'omap-for-v5.6/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix compile if CONFIG_HAVE_ARM_SMCCC is not set arm: dts: dra76x: Fix mmc3 max-frequency ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes bus: ti-sysc: Fix 1-wire reset quirk ARM: dts: dra7-l4: mark timer13-16 as pwm capable ARM: dts: dra7xx-clocks: Fixup IPU1 mux clock parent source ARM: dts: am437x-idk-evm: Fix incorrect OPP node names ARM: dts: dra7-evm: Rename evm_3v3 regulator to vsys_3v3 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
penberg · Feb 29, 2020 · 27ad612 · 27ad612
2 parents f9a15f3 + 51c22d7
commit 27ad612
Show file tree

Hide file tree

Showing 9 changed files with 20 additions and 19 deletions.
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -526,11 +526,11 @@
 	 * Supply voltage supervisor on board will not allow opp50 so
 	 * disable it and set opp100 as suspend OPP.
 	 */
-	opp50@300000000 {
+	opp50-300000000 {
 		status = "disabled";
 	};
 
-	opp100@600000000 {
+	opp100-600000000 {
 		opp-suspend;
 	};
 };
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
@@ -61,10 +61,10 @@
 		regulator-max-microvolt = <1800000>;
 	};
 
-	evm_3v3: fixedregulator-evm3v3 {
+	vsys_3v3: fixedregulator-vsys3v3 {
 		/* Output of Cntlr A of TPS43351-Q1 on dra7-evm */
 		compatible = "regulator-fixed";
-		regulator-name = "evm_3v3";
+		regulator-name = "vsys_3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&evm_12v0>;

diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -3474,6 +3474,7 @@
 				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 24>;
 				clock-names = "fck";
 				interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
 			};
 		};
 
@@ -3501,6 +3502,7 @@
 				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 24>;
 				clock-names = "fck";
 				interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
 			};
 		};
 
@@ -3528,6 +3530,7 @@
 				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
 				clock-names = "fck";
 				interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
 			};
 		};
 
@@ -3555,6 +3558,7 @@
 				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
 				clock-names = "fck";
 				interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
 			};
 		};
 

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
@@ -184,6 +184,7 @@
 				device_type = "pci";
 				ranges = <0x81000000 0 0          0x03000 0 0x00010000
 					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+				dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
 				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
@@ -238,6 +239,7 @@
 				device_type = "pci";
 				ranges = <0x81000000 0 0          0x03000 0 0x00010000
 					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+				dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
 				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;

diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
@@ -128,3 +128,8 @@
 &usb4_tm {
 	status = "disabled";
 };
+
+&mmc3 {
+	/* dra76x is not affected by i887 */
+	max-frequency = <96000000>;
+};
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -796,16 +796,6 @@
 		clock-div = <1>;
 	};
 
-	ipu1_gfclk_mux: ipu1_gfclk_mux@520 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0520>;
-		assigned-clocks = <&ipu1_gfclk_mux>;
-		assigned-clock-parents = <&dpll_core_h22x2_ck>;
-	};
-
 	dummy_ck: dummy_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -1564,6 +1554,8 @@
 			compatible = "ti,clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
+			assigned-clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 24>;
+			assigned-clock-parents = <&dpll_core_h22x2_ck>;
 		};
 
 		ipu_clkctrl: ipu-clkctrl@50 {

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
@@ -16,7 +16,7 @@ hwmod-common				= omap_hwmod.o omap_hwmod_reset.o \
 clock-common				= clock.o
 secure-common				= omap-smc.o omap-secure.o
 
-obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
 obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common)
 obj-$(CONFIG_SOC_AM33XX) += $(hwmod-common) $(secure-common)

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
@@ -431,7 +431,6 @@ void __init omap2420_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap_clk_soc_init = omap2420_dt_clk_init;
 	rate_table = omap2420_rate_table;
-	omap_secure_init();
 }
 
 void __init omap2420_init_late(void)
@@ -456,7 +455,6 @@ void __init omap2430_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap_clk_soc_init = omap2430_dt_clk_init;
 	rate_table = omap2430_rate_table;
-	omap_secure_init();
 }
 
 void __init omap2430_init_late(void)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
@@ -1400,7 +1400,7 @@ static void sysc_init_revision_quirks(struct sysc *ddata)
 }
 
 /* 1-wire needs module's internal clocks enabled for reset */
-static void sysc_clk_enable_quirk_hdq1w(struct sysc *ddata)
+static void sysc_pre_reset_quirk_hdq1w(struct sysc *ddata)
 {
 	int offset = 0x0c;	/* HDQ_CTRL_STATUS */
 	u16 val;
@@ -1488,7 +1488,7 @@ static void sysc_init_module_quirks(struct sysc *ddata)
 		return;
 
 	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_HDQ1W) {
-		ddata->clk_enable_quirk = sysc_clk_enable_quirk_hdq1w;
+		ddata->clk_disable_quirk = sysc_pre_reset_quirk_hdq1w;
 
 		return;
 	}