Skip to content
forked from esp-rs/esp-hal

no_std Hardware Abstraction Layers for ESP32 microcontrollers

License

Notifications You must be signed in to change notification settings

perlindgren/esp-hal

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

esp-hal

GitHub Workflow Status MIT/Apache-2.0 licensed Matrix

Hardware Abstraction Layer crates for the ESP32, ESP32-C2/C3/C6, ESP32-H2, and ESP32-S2/S3 from Espressif.

These HALs are no_std; if you are looking for std support, please use esp-idf-hal instead.

If you have any questions, comments, or concerns, please open an issue, start a new discussion, or join us on Matrix. For additional information regarding any of the crates in this repository, please refer to the relevant crate's README.

Note

This project is still in the relatively early stages of development, and as such there should be no expectation of API stability. A significant number of peripherals currently have drivers implemented but have varying levels of functionality. For most basic tasks, this should be usable already, however some more advanced or uncommon features may not yet be implemented.

Getting Started

For information relating to the development of Rust applications on ESP devices, please first read The Rust on ESP Book.

For information about the HAL and how to use it in your own projects, please refer to the documentation on crates.io for the relevant chip.

Resources

HAL Crates

Crate Target Technical Reference Manual
esp32-hal xtensa-esp32-none-elf ESP32
esp32c2-hal riscv32imc-unknown-none-elf ESP32-C2
esp32c3-hal riscv32imc-unknown-none-elf ESP32-C3
esp32c6-hal riscv32imac-unknown-none-elf ESP32-C6
esp32c6-lp-hal riscv32imac-unknown-none-elf N/A
esp32h2-hal riscv32imac-unknown-none-elf ESP32-H2
esp32s2-hal xtensa-esp32s2-none-elf ESP32-S2
esp32s3-hal xtensa-esp32s3-none-elf ESP32-S3

Ancillary Crates

There are a number of other crates within the esp-rs organization which can be used in conjunction with esp-hal:

Crate Description
esp-alloc A simple no_std heap allocator
esp-backtrace Backtrace support for bare-metal applications
esp-ieee802154 Low-level IEEE802.15.4 driver for the ESP32-C6 and ESP32-H2
esp-println Provides print! and println! implementations
esp-storage Implementation of embedded-storage traits to access unencrypted flash memory
esp-wifi no_std Wi-Fi/Bluetooth LE support

Git Hooks

We provide a simple pre-commit hook to verify the formatting of each package prior to committing changes. We strongly encourage use of this git hook.

The hook can be enabled by copying it in to the .git/hooks/ directory:

cp pre-commit .git/hooks/pre-commit

When using this hook, you can choose to ignore its failure on a per-commit basis by committing with the --no-verify flag; however, you will need to be sure that all packages are formatted when submitting a pull request.

MSRV

The Minimum Supported Rust Version is 1.67.0 for all packages.

RISC-V is officially supported by the official Rust compiler, however, it should be noted that targeting the Xtensa ISA currently requires the use of the esp-rs/rust compiler fork. Our recommend method of installation is espup.

When targetting the RISC-V architecture, it is necessary to set RUSTC_BOOTSTRAP=1 in order to build with a previous stable release; this is not required when targeting Xtensa.

License

Licensed under either of:

at your option.

Contribution

Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.

About

no_std Hardware Abstraction Layers for ESP32 microcontrollers

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Rust 99.8%
  • Other 0.2%