Updated with changes from the wiki

pine64 · Dec 1, 2024 · 7cfa44f · 7cfa44f
1 parent eba3242
commit 7cfa44f
Show file tree

Hide file tree

Showing 5 changed files with 18 additions and 13 deletions.
diff --git a/content/documentation/PineNote/Development/Booting_Linux.md b/content/documentation/PineNote/Development/Booting_Linux.md
@@ -9,6 +9,10 @@ menu:
     weight: 3
 ---
 
+{{< admonition type="warning" >}}
+This page is only relevant for the first batch of PineNotes (December 2001)! The second batch of PineNotes (October 2024) come with Linux pre-installed!
+{{< /admonition >}}
+
 To boot Linux, the stock U-Boot has to be patched.
 
 Here the method from [charasyn](https://gist.github.com/charasyn/206b2537534b6679b0961be64cf9c35f) is used, based of work from Dorian as credited in the script. We’ll use the script to pull the U-Boot environment out of the stock U-Boot partition. We’ll then apply the patch, recreate the image, add a configuration file, and flash the new image to the PineNote.

diff --git a/content/documentation/PineNote/Development/Flashing.md b/content/documentation/PineNote/Development/Flashing.md
@@ -12,7 +12,7 @@ menu:
 {{% docs/construction %}}
 
 {{< admonition type="note" >}}
- These instructions are directed towards experienced developers only!
+These instructions are directed towards experienced developers only!
 {{< /admonition >}}
 
 This page contains information on flashing software to the PineNote.

diff --git a/content/documentation/PineNote/Development/UART.md b/content/documentation/PineNote/Development/UART.md
@@ -11,7 +11,7 @@ menu:
 
 {{< figure src="/documentation/PineNote/images/Pinenote-uart-dongle.jpeg" title="Basic non-stock PineNote UART dongle" width="400" >}}
 
-The USB UART dongle delivered with the PineNote allows you to have access to a serial port via USB-C Debug Accessory Mode (_DAM_) without having to open up the device. The factory firmware runs at a baud rate of 1500000bps, 8 data bits 1 stop bit, no parity and no flow control. The USB-C male end should go into the PineNote and the female end can be connected with a standard USB-C cable to your computer.
+The USB UART dongle delivered with the PineNote allows you to have access to its serial console via USB-C Debug Accessory Mode (DAM) without having to disassemble the device.  The factory-installed operating system runs the serial console at the 1,500,000 bps speed, 8 data bits and 1 stop bit, no parity, and no flow control. The USB-C male end should go into the PineNote and the female end can be connected with a standard USB-C cable to your computer.
 
 It is relatively easy to build your own UART interface with a USB-C breakout board (for example https://www.ebay.com/itm/275407037613), two resistors and a 3.3V USB serial adapter. It is basically just two 1K pull up resistors (R3, R4), the data sheet values of 10K isn’t whats on the real hardware, see the [schematic](https://files.pine64.org/doc/PineNote/PineNote_USB-C_Console_UART_breakout_board_schematic_v1.0_20210903.pdf). The pull ups enable the serial output on SBU1 and SBU2 you can use with any 3.3V USB serial adapter.
 

diff --git a/content/documentation/PineNote/Further_information/Specification.md b/content/documentation/PineNote/Further_information/Specification.md
@@ -55,5 +55,6 @@ menu:
 
 ## Accessories
 
-* Optional EMR pen with magnetic attachment (included in the first production batch)
-* Optional Cover (included in the first production batch)
+* December 2021 batch: Optional EMR pen with magnetic attachment (included in the first production batch)
+* October 2024 batch: Optional passive pen
+* Optional Cover (included in the December 2021 and October 2024 batch)
diff --git a/content/documentation/PineNote/Releases.md b/content/documentation/PineNote/Releases.md
@@ -9,15 +9,7 @@ menu:
     weight: 4
 ---
 
-This page contains a list of all available operating systems for the [PineNote](/documentation/PineNote) in alphabetical order.
-
-## Alpine
-
-See https://github.com/DorianRudolph/pinenotes#alpine
-
-## Arch Linux
-
-See https://github.com/DorianRudolph/pinenotes#arch-linux
+The following releases are available for the [PineNote](/documentation/PineNote).
 
 ## Debian
 
@@ -29,6 +21,14 @@ See https://github.com/DorianRudolph/pinenotes#arch-linux
 
 * A Debian-based minimalistic rootfs/disc image can be built using `debos` using the work from  [Eugen Răhăian](https://salsa.debian.org/eugenrh). The GNOME image above is building on this work.
 
+## Alpine
+
+See https://github.com/DorianRudolph/pinenotes#alpine
+
+## Arch Linux
+
+See https://github.com/DorianRudolph/pinenotes#arch-linux
+
 ## postmarketOS
 
 See https://wiki.postmarketos.org/wiki/PINE64_PineNote_(pine64-pinenote)