Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/lin…

…ux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "This updated pull request does not contain the last few GIC related
  patches which were reported to cause a regression.  There is a fix
  available, but I let it breed for a couple of days first.

  The irq departement provides:

   - new infrastructure to support non PCI based MSI interrupts
   - a couple of new irq chip drivers
   - the usual pile of fixlets and updates to irq chip drivers
   - preparatory changes for removal of the irq argument from interrupt
     flow handlers
   - preparatory changes to remove IRQF_VALID"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
  irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources
  irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2
  irqchip: Add documentation for the bcm2836 interrupt controller
  irqchip/bcm2835: Add support for being used as a second level controller
  irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ
  PCI: xilinx: Fix typo in function name
  irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance
  irqchip/gic: Only allow the primary GIC to set the CPU map
  PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove
  unicore32/irq: Prepare puv3_gpio_handler for irq argument removal
  tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal
  m68k/irq: Prepare irq handlers for irq argument removal
  C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal
  blackfin: Prepare irq handlers for irq argument removal
  arc/irq: Prepare idu_cascade_isr for irq argument removal
  sparc/irq: Use access helper irq_data_get_affinity_mask()
  sparc/irq: Use helper irq_data_get_irq_handler_data()
  parisc/irq: Use access helper irq_data_get_affinity_mask()
  mn10300/irq: Use access helper irq_data_get_affinity_mask()
  irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal
  ...

Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt

@@ -5,9 +5,14 @@ The BCM2835 contains a custom top-level interrupt controller, which supports
 controller, or the HW block containing it, is referred to occasionally
 as "armctrl" in the SoC documentation, hence naming of this binding.
 
+The BCM2836 contains the same interrupt controller with the same
+interrupts, but the per-CPU interrupt controller is the root, and an
+interrupt there indicates that the ARMCTRL has an interrupt to handle.
+
 Required properties:
 
-- compatible : should be "brcm,bcm2835-armctrl-ic"
+- compatible : should be "brcm,bcm2835-armctrl-ic" or
+                 "brcm,bcm2836-armctrl-ic"
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
@@ -20,6 +25,12 @@ Required properties:
   The 2nd cell contains the interrupt number within the bank. Valid values
   are 0..7 for bank 0, and 0..31 for bank 1.
 
+Additional required properties for brcm,bcm2836-armctrl-ic:
+- interrupt-parent : Specifies the parent interrupt controller when this
+  controller is the second level.
+- interrupts : Specifies the interrupt on the parent for this interrupt
+  controller to handle.
+
 The interrupt sources are as follows:
 
 Bank 0:
@@ -102,9 +113,21 @@ Bank 2:
 
 Example:
 
+/* BCM2835, first level */
 intc: interrupt-controller {
 	compatible = "brcm,bcm2835-armctrl-ic";
 	reg = <0x7e00b200 0x200>;
 	interrupt-controller;
 	#interrupt-cells = <2>;
 };
+
+/* BCM2836, second level */
+intc: interrupt-controller {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	interrupt-parent = <&local_intc>;
+	interrupts = <8>;
+};

Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt

@@ -0,0 +1,37 @@
+BCM2836 per-CPU interrupt controller
+
+The BCM2836 has a per-cpu interrupt controller for the timer, PMU
+events, and SMP IPIs.  One of the CPUs may receive interrupts for the
+peripheral (GPU) events, which chain to the BCM2835-style interrupt
+controller.
+
+Required properties:
+
+- compatible:	 	Should be "brcm,bcm2836-l1-intc"
+- reg:			Specifies base physical address and size of the
+			  registers
+- interrupt-controller:	Identifies the node as an interrupt controller
+- #interrupt-cells:	Specifies the number of cells needed to encode an
+			  interrupt source. The value shall be 1
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+The interrupt sources are as follows:
+
+0: CNTPSIRQ
+1: CNTPNSIRQ
+2: CNTHPIRQ
+3: CNTVIRQ
+8: GPU_FAST
+9: PMU_FAST
+
+Example:
+
+local_intc: local_intc {
+	compatible = "brcm,bcm2836-l1-intc";
+	reg = <0x40000000 0x100>;
+	interrupt-controller;
+	#interrupt-cells = <1>;
+	interrupt-parent = <&local_intc>;
+};

arch/alpha/kernel/irq.c

@@ -59,7 +59,7 @@ int irq_select_affinity(unsigned int irq)
 		cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
 	last_cpu = cpu;
 
-	cpumask_copy(data->affinity, cpumask_of(cpu));
+	cpumask_copy(irq_data_get_affinity_mask(data), cpumask_of(cpu));
 	chip->irq_set_affinity(data, cpumask_of(cpu), false);
 	return 0;
 }

arch/arc/kernel/mcip.c

@@ -252,9 +252,10 @@ static struct irq_chip idu_irq_chip = {
 
 static int idu_first_irq;
 
-static void idu_cascade_isr(unsigned int core_irq, struct irq_desc *desc)
+static void idu_cascade_isr(unsigned int __core_irq, struct irq_desc *desc)
 {
 	struct irq_domain *domain = irq_desc_get_handler_data(desc);
+	unsigned int core_irq = irq_desc_get_irq(desc);
 	unsigned int idu_irq;
 
 	idu_irq = core_irq - idu_first_irq;

arch/arm/mach-shmobile/setup-r8a7779.c

@@ -62,8 +62,6 @@ static void __init r8a7779_map_io(void)
 
 static void __init r8a7779_init_irq_dt(void)
 {
-	gic_set_irqchip_flags(IRQCHIP_SKIP_SET_WAKE);
-
 	irqchip_init();
 
 	/* route all interrupts to ARM */

arch/arm/mach-ux500/cpu.c

@@ -56,7 +56,6 @@ void __init ux500_init_irq(void)
 	struct device_node *np;
 	struct resource r;
 
-	gic_set_irqchip_flags(IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND);
 	irqchip_init();
 	np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu");
 	of_address_to_resource(np, 0, &r);

arch/arm/mach-vexpress/tc2_pm.c

@@ -80,7 +80,7 @@ static void tc2_pm_cpu_powerdown_prepare(unsigned int cpu, unsigned int cluster)
 	 * to the CPU by disabling the GIC CPU IF to prevent wfi
 	 * from completing execution behind power controller back
 	 */
-	gic_cpu_if_down();
+	gic_cpu_if_down(0);
 }
 
 static void tc2_pm_cluster_powerdown_prepare(unsigned int cluster)

arch/arm/mach-zynq/common.c

@@ -186,7 +186,6 @@ static void __init zynq_map_io(void)
 
 static void __init zynq_irq_init(void)
 {
-	gic_set_irqchip_flags(IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND);
 	irqchip_init();
 }
 

arch/avr32/mach-at32ap/extint.c

@@ -128,9 +128,9 @@ static int eic_set_irq_type(struct irq_data *d, unsigned int flow_type)
 
 	irqd_set_trigger_type(d, flow_type);
 	if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
-		__irq_set_handler_locked(irq, handle_level_irq);
+		irq_set_handler_locked(d, handle_level_irq);
 	else
-		__irq_set_handler_locked(irq, handle_edge_irq);
+		irq_set_handler_locked(d, handle_edge_irq);
 
 	return IRQ_SET_MASK_OK_NOCOPY;
 }

arch/avr32/mach-at32ap/pio.c

@@ -286,7 +286,7 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 	struct pio_device	*pio = irq_desc_get_chip_data(desc);
 	unsigned		gpio_irq;
 
-	gpio_irq = (unsigned) irq_get_handler_data(irq);
+	gpio_irq = (unsigned) irq_desc_get_handler_data(desc);
 	for (;;) {
 		u32		isr;
 
@@ -312,15 +312,15 @@ gpio_irq_setup(struct pio_device *pio, int irq, int gpio_irq)
 	unsigned	i;
 
 	irq_set_chip_data(irq, pio);
-	irq_set_handler_data(irq, (void *)gpio_irq);
 
 	for (i = 0; i < 32; i++, gpio_irq++) {
 		irq_set_chip_data(gpio_irq, pio);
 		irq_set_chip_and_handler(gpio_irq, &gpio_irqchip,
 					 handle_simple_irq);
 	}
 
-	irq_set_chained_handler(irq, gpio_irq_handler);
+	irq_set_chained_handler_and_data(irq, gpio_irq_handler,
+					 (void *)gpio_irq);
 }
 
 /*--------------------------------------------------------------------------*/

arch/blackfin/mach-bf537/ints-priority.c

@@ -182,9 +182,11 @@ static struct irq_chip bf537_mac_rx_irqchip = {
 	.irq_unmask = bf537_mac_rx_unmask_irq,
 };
 
-static void bf537_demux_mac_rx_irq(unsigned int int_irq,
+static void bf537_demux_mac_rx_irq(unsigned int __int_irq,
 				   struct irq_desc *desc)
 {
+	unsigned int int_irq = irq_desc_get_irq(desc);
+
 	if (bfin_read_DMA1_IRQ_STATUS() & (DMA_DONE | DMA_ERR))
 		bfin_handle_irq(IRQ_MAC_RX);
 	else

arch/blackfin/mach-common/ints-priority.c

@@ -194,7 +194,8 @@ void bfin_internal_unmask_irq(unsigned int irq)
 #ifdef CONFIG_SMP
 static void bfin_internal_unmask_irq_chip(struct irq_data *d)
 {
-	bfin_internal_unmask_irq_affinity(d->irq, d->affinity);
+	bfin_internal_unmask_irq_affinity(d->irq,
+					  irq_data_get_affinity_mask(d));
 }
 
 static int bfin_internal_set_affinity(struct irq_data *d,
@@ -685,12 +686,12 @@ void bfin_demux_mac_status_irq(unsigned int int_err_irq,
 }
 #endif
 
-static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle)
+static inline void bfin_set_irq_handler(struct irq_data *d, irq_flow_handler_t handle)
 {
 #ifdef CONFIG_IPIPE
 	handle = handle_level_irq;
 #endif
-	__irq_set_handler_locked(irq, handle);
+	irq_set_handler_locked(d, handle);
 }
 
 #ifdef CONFIG_GPIO_ADI
@@ -802,9 +803,9 @@ static int bfin_gpio_irq_type(struct irq_data *d, unsigned int type)
 	}
 
 	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
-		bfin_set_irq_handler(irq, handle_edge_irq);
+		bfin_set_irq_handler(d, handle_edge_irq);
 	else
-		bfin_set_irq_handler(irq, handle_level_irq);
+		bfin_set_irq_handler(d, handle_level_irq);
 
 	return 0;
 }
@@ -824,9 +825,9 @@ static void bfin_demux_gpio_block(unsigned int irq)
 	}
 }
 
-void bfin_demux_gpio_irq(unsigned int inta_irq,
-			struct irq_desc *desc)
+void bfin_demux_gpio_irq(unsigned int __inta_irq, struct irq_desc *desc)
 {
+	unsigned int inta_irq = irq_desc_get_irq(desc);
 	unsigned int irq;
 
 	switch (inta_irq) {

arch/c6x/platforms/megamod-pic.c

@@ -93,10 +93,11 @@ static struct irq_chip megamod_chip = {
 	.irq_unmask	= unmask_megamod,
 };
 
-static void megamod_irq_cascade(unsigned int irq, struct irq_desc *desc)
+static void megamod_irq_cascade(unsigned int __irq, struct irq_desc *desc)
 {
 	struct megamod_cascade_data *cascade;
 	struct megamod_pic *pic;
+	unsigned int irq;
 	u32 events;
 	int n, idx;
 
@@ -282,8 +283,8 @@ static struct megamod_pic * __init init_megamod_pic(struct device_node *np)
 		soc_writel(~0, &pic->regs->evtmask[i]);
 		soc_writel(~0, &pic->regs->evtclr[i]);
 
-		irq_set_handler_data(irq, &cascade_data[i]);
-		irq_set_chained_handler(irq, megamod_irq_cascade);
+		irq_set_chained_handler_and_data(irq, megamod_irq_cascade,
+						 &cascade_data[i]);
 	}
 
 	/* Finally, set up the MUX registers */

arch/ia64/kernel/iosapic.c

@@ -610,9 +610,9 @@ register_intr (unsigned int gsi, int irq, unsigned char delivery,
 			       chip->name, irq_type->name);
 		chip = irq_type;
 	}
-	__irq_set_chip_handler_name_locked(irq, chip, trigger == IOSAPIC_EDGE ?
-					   handle_edge_irq : handle_level_irq,
-					   NULL);
+	irq_set_chip_handler_name_locked(irq_get_irq_data(irq), chip,
+		trigger == IOSAPIC_EDGE ? handle_edge_irq : handle_level_irq,
+		NULL);
 	return 0;
 }
 
@@ -838,7 +838,7 @@ iosapic_unregister_intr (unsigned int gsi)
 	if (iosapic_intr_info[irq].count == 0) {
 #ifdef CONFIG_SMP
 		/* Clear affinity */
-		cpumask_setall(irq_get_irq_data(irq)->affinity);
+		cpumask_setall(irq_get_affinity_mask(irq));
 #endif
 		/* Clear the interrupt information */
 		iosapic_intr_info[irq].dest = 0;

arch/ia64/kernel/irq.c

@@ -67,7 +67,7 @@ static char irq_redir [NR_IRQS]; // = { [0 ... NR_IRQS-1] = 1 };
 void set_irq_affinity_info (unsigned int irq, int hwid, int redir)
 {
 	if (irq < NR_IRQS) {
-		cpumask_copy(irq_get_irq_data(irq)->affinity,
+		cpumask_copy(irq_get_affinity_mask(irq),
 			     cpumask_of(cpu_logical_id(hwid)));
 		irq_redir[irq] = (char) (redir & 0xff);
 	}
@@ -119,8 +119,8 @@ static void migrate_irqs(void)
 		if (irqd_is_per_cpu(data))
 			continue;
 
-		if (cpumask_any_and(data->affinity, cpu_online_mask)
-		    >= nr_cpu_ids) {
+		if (cpumask_any_and(irq_data_get_affinity_mask(data),
+				    cpu_online_mask) >= nr_cpu_ids) {
 			/*
 			 * Save it for phase 2 processing
 			 */

arch/ia64/kernel/msi_ia64.c

@@ -23,7 +23,7 @@ static int ia64_set_msi_irq_affinity(struct irq_data *idata,
 	if (irq_prepare_move(irq, cpu))
 		return -1;
 
-	__get_cached_msi_msg(idata->msi_desc, &msg);
+	__get_cached_msi_msg(irq_data_get_msi_desc(idata), &msg);
 
 	addr = msg.address_lo;
 	addr &= MSI_ADDR_DEST_ID_MASK;
@@ -36,7 +36,7 @@ static int ia64_set_msi_irq_affinity(struct irq_data *idata,
 	msg.data = data;
 
 	pci_write_msi_msg(irq, &msg);
-	cpumask_copy(idata->affinity, cpumask_of(cpu));
+	cpumask_copy(irq_data_get_affinity_mask(idata), cpumask_of(cpu));
 
 	return 0;
 }
@@ -148,7 +148,7 @@ static int dmar_msi_set_affinity(struct irq_data *data,
 	msg.address_lo |= MSI_ADDR_DEST_ID_CPU(cpu_physical_id(cpu));
 
 	dmar_msi_write(irq, &msg);
-	cpumask_copy(data->affinity, mask);
+	cpumask_copy(irq_data_get_affinity_mask(data), mask);
 
 	return 0;
 }

arch/ia64/sn/kernel/msi_sn.c

@@ -175,7 +175,7 @@ static int sn_set_msi_irq_affinity(struct irq_data *data,
 	 * Release XIO resources for the old MSI PCI address
 	 */
 
-	__get_cached_msi_msg(data->msi_desc, &msg);
+	__get_cached_msi_msg(irq_data_get_msi_desc(data), &msg);
 	sn_pdev = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
 	pdev = sn_pdev->pdi_linux_pcidev;
 	provider = SN_PCIDEV_BUSPROVIDER(pdev);
@@ -206,7 +206,7 @@ static int sn_set_msi_irq_affinity(struct irq_data *data,
 	msg.address_lo = (u32)(bus_addr & 0x00000000ffffffff);
 
 	pci_write_msi_msg(irq, &msg);
-	cpumask_copy(data->affinity, cpu_mask);
+	cpumask_copy(irq_data_get_affinity_mask(data), cpu_mask);
 
 	return 0;
 }

arch/m68k/coldfire/intc-5272.c

@@ -143,8 +143,10 @@ static int intc_irq_set_type(struct irq_data *d, unsigned int type)
  * We need to be careful with the masking/acking due to the side effects
  * of masking an interrupt.
  */
-static void intc_external_irq(unsigned int irq, struct irq_desc *desc)
+static void intc_external_irq(unsigned int __irq, struct irq_desc *desc)
 {
+	unsigned int irq = irq_desc_get_irq(desc);
+
 	irq_desc_get_chip(desc)->irq_ack(&desc->irq_data);
 	handle_simple_irq(irq, desc);
 }

arch/m68k/mac/oss.c

@@ -63,13 +63,15 @@ void __init oss_nubus_init(void)
  * Handle miscellaneous OSS interrupts.
  */
 
-static void oss_irq(unsigned int irq, struct irq_desc *desc)
+static void oss_irq(unsigned int __irq, struct irq_desc *desc)
 {
 	int events = oss->irq_pending &
-	             (OSS_IP_IOPSCC | OSS_IP_SCSI | OSS_IP_IOPISM);
+		(OSS_IP_IOPSCC | OSS_IP_SCSI | OSS_IP_IOPISM);
 
 #ifdef DEBUG_IRQS
 	if ((console_loglevel == 10) && !(events & OSS_IP_SCSI)) {
+		unsigned int irq = irq_desc_get_irq(desc);
+
 		printk("oss_irq: irq %u events = 0x%04X\n", irq,
 			(int) oss->irq_pending);
 	}

arch/m68k/mac/psc.c

@@ -113,9 +113,10 @@ void __init psc_init(void)
  * PSC interrupt handler. It's a lot like the VIA interrupt handler.
  */
 
-static void psc_irq(unsigned int irq, struct irq_desc *desc)
+static void psc_irq(unsigned int __irq, struct irq_desc *desc)
 {
 	unsigned int offset = (unsigned int)irq_desc_get_handler_data(desc);
+	unsigned int irq = irq_desc_get_irq(desc);
 	int pIFR	= pIFRbase + offset;
 	int pIER	= pIERbase + offset;
 	int irq_num;