Merge tag 'iio-for-3.19a' of git://git.kernel.org/pub/scm/linux/kerne…

…l/git/jic23/iio into staging-next

Jonathan writes:

First round of new drivers, features and cleanups for IIO in the 3.19 cycle.

New drivers / supported parts
* rockchip - rk3066-tsadc variant
* si7020 humidity and temperature sensor
* mcp320x - add mcp3001, mcp3002, mcp3004, mcp3008, mcp3201, mcp3202
* bmp280 pressure and temperature sensor
* Qualcomm SPMI PMIC current ADC driver
* Exynos_adc - support exynos7

New features
* vf610-adc - add temperature sensor support
* Documentation of current attributes, scaled pressure, offset and
  scaled humidity, RGBC intensity gain factor and scale applied to
  differential voltage channels.
* Bring iio_event_monitor up to date with newer modifiers.
* Add of_xlate function to allow for complex channel mappings from the
  device tree.
* Add -g parameter to generic_buffer example to allow for devices with
  directly fed (no trigger) buffers.
* Move exynos driver over to syscon for PMU register access.

Cleanups, fixes for new drivers
* lis3l02dq drop an unneeded else.
* st sensors - renam st_sensors to st_sensor_settings (for clarity)
* st sensors - drop an unused parameter from all the probe utility
  functions.
* vf610 better error handling and tidy up.
* si7020 - cleanups following merge
* as3935 - drop some unnecessary semicolons.
* bmp280 - fix the pressure calculation.

Documentation/ABI/testing/sysfs-bus-iio

@@ -200,6 +200,13 @@ Description:
 		Raw pressure measurement from channel Y. Units after
 		application of scale and offset are kilopascal.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_input
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_input
+KernelVersion:	3.8
+Contact:	[email protected]
+Description:
+		Scaled pressure measurement from channel Y, in kilopascal.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_humidityrelative_raw
 KernelVersion:	3.14
 Contact:	[email protected]
@@ -231,6 +238,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_tempY_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_humidityrelative_offset
 KernelVersion:	2.6.35
 Contact:	[email protected]
 Description:
@@ -251,6 +259,7 @@ Description:
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_scale
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale
@@ -266,6 +275,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_sca
 What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_humidityrelative_scale
 KernelVersion:	2.6.35
 Contact:	[email protected]
 Description:
@@ -328,6 +338,10 @@ Description:
 		are listed in this attribute.
 
 What		/sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_clear_hardwaregain
 KernelVersion:	2.6.35
 Contact:	[email protected]
 Description:
@@ -1028,3 +1042,12 @@ Contact:	[email protected]
 Description:
 		Raw value of rotation from true/magnetic north measured with
 		or without compensation from tilt sensors.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentX_raw
+KernelVersion:	3.18
+Contact:	[email protected]
+Description:
+		Raw current measurement from channel X. Units are in milliamps
+		after application of scale and offset. If no offset or scale is
+		present, output should be considered as processed with the
+		unit in milliamps.

Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt

@@ -16,6 +16,8 @@ Required properties:
 				future controllers.
 			Must be "samsung,exynos3250-adc" for
 				controllers compatible with ADC of Exynos3250.
+			Must be "samsung,exynos7-adc" for
+				the ADC in Exynos7 and compatibles
 			Must be "samsung,s3c2410-adc" for
 				the ADC in s3c2410 and compatibles
 			Must be "samsung,s3c2416-adc" for
@@ -43,13 +45,16 @@ Required properties:
 				   compatible ADC block)
 - vdd-supply		VDD input supply.
 
+- samsung,syscon-phandle Contains the PMU system controller node
+			(To access the ADC_PHY register on Exynos5250/5420/5800/3250)
+
 Note: child nodes can be added for auto probing from device tree.
 
 Example: adding device info in dtsi file
 
 adc: adc@12D10000 {
 	compatible = "samsung,exynos-adc-v1";
-	reg = <0x12D10000 0x100>, <0x10040718 0x4>;
+	reg = <0x12D10000 0x100>;
 	interrupts = <0 106 0>;
 	#io-channel-cells = <1>;
 	io-channel-ranges;
@@ -58,13 +63,14 @@ adc: adc@12D10000 {
 	clock-names = "adc";
 
 	vdd-supply = <&buck5_reg>;
+	samsung,syscon-phandle = <&pmu_system_controller>;
 };
 
 Example: adding device info in dtsi file for Exynos3250 with additional sclk
 
 adc: adc@126C0000 {
 	compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2;
-	reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+	reg = <0x126C0000 0x100>;
 	interrupts = <0 137 0>;
 	#io-channel-cells = <1>;
 	io-channel-ranges;
@@ -73,6 +79,7 @@ adc: adc@126C0000 {
 	clock-names = "adc", "sclk";
 
 	vdd-supply = <&buck5_reg>;
+	samsung,syscon-phandle = <&pmu_system_controller>;
 };
 
 Example: Adding child nodes in dts file

Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt

@@ -0,0 +1,46 @@
+Qualcomm's SPMI PMIC current ADC
+
+QPNP PMIC current ADC (IADC) provides interface to clients to read current.
+A 16 bit ADC is used for current measurements. IADC can measure the current
+through an external resistor (channel 1) or internal (built-in) resistor
+(channel 0). When using an external resistor it is to be described by
+qcom,external-resistor-micro-ohms property.
+
+IADC node:
+
+- compatible:
+    Usage: required
+    Value type: <string>
+    Definition: Should contain "qcom,spmi-iadc".
+
+- reg:
+    Usage: required
+    Value type: <prop-encoded-array>
+    Definition: IADC base address and length in the SPMI PMIC register map
+
+- interrupts:
+    Usage: optional
+    Value type: <prop-encoded-array>
+    Definition: End of ADC conversion.
+
+- qcom,external-resistor-micro-ohms:
+    Usage: optional
+    Value type: <u32>
+    Definition: Sense resister value in micro Ohm.
+                If not defined value of 10000 micro Ohms will be used.
+
+Example:
+	/* IADC node */
+	pmic_iadc: iadc@3600 {
+		compatible = "qcom,spmi-iadc";
+		reg = <0x3600 0x100>;
+		interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
+		qcom,external-resistor-micro-ohms = <10000>;
+		#io-channel-cells  = <1>;
+	};
+
+	/* IIO client node */
+	bat {
+		io-channels = <&pmic_iadc  0>;
+		io-channel-names = "iadc";
+	};

Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt

@@ -1,7 +1,7 @@
 Rockchip Successive Approximation Register (SAR) A/D Converter bindings
 
 Required properties:
-- compatible: Should be "rockchip,saradc"
+- compatible: Should be "rockchip,saradc" or "rockchip,rk3066-tsadc"
 - reg: physical base address of the controller and length of memory mapped
        region.
 - interrupts: The interrupt number to the cpu. The interrupt specifier format

arch/arm/boot/dts/exynos3250.dtsi

@@ -311,12 +311,13 @@
 		adc: adc@126C0000 {
 			compatible = "samsung,exynos3250-adc",
 				     "samsung,exynos-adc-v2";
-			reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+			reg = <0x126C0000 0x100>;
 			interrupts = <0 137 0>;
 			clock-names = "adc", "sclk";
 			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
 			#io-channel-cells = <1>;
 			io-channel-ranges;
+			samsung,syscon-phandle = <&pmu_system_controller>;
 			status = "disabled";
 		};
 

arch/arm/boot/dts/exynos4x12.dtsi

@@ -108,13 +108,14 @@
 
 	adc: adc@126C0000 {
 		compatible = "samsung,exynos-adc-v1";
-		reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+		reg = <0x126C0000 0x100>;
 		interrupt-parent = <&combiner>;
 		interrupts = <10 3>;
 		clocks = <&clock CLK_TSADC>;
 		clock-names = "adc";
 		#io-channel-cells = <1>;
 		io-channel-ranges;
+		samsung,syscon-phandle = <&pmu_system_controller>;
 		status = "disabled";
 	};
 

arch/arm/boot/dts/exynos5250.dtsi

@@ -750,12 +750,13 @@
 
 	adc: adc@12D10000 {
 		compatible = "samsung,exynos-adc-v1";
-		reg = <0x12D10000 0x100>, <0x10040718 0x4>;
+		reg = <0x12D10000 0x100>;
 		interrupts = <0 106 0>;
 		clocks = <&clock CLK_ADC>;
 		clock-names = "adc";
 		#io-channel-cells = <1>;
 		io-channel-ranges;
+		samsung,syscon-phandle = <&pmu_system_controller>;
 		status = "disabled";
 	};
 

arch/arm/boot/dts/exynos5420.dtsi

@@ -541,12 +541,13 @@
 
 	adc: adc@12D10000 {
 		compatible = "samsung,exynos-adc-v2";
-		reg = <0x12D10000 0x100>, <0x10040720 0x4>;
+		reg = <0x12D10000 0x100>;
 		interrupts = <0 106 0>;
 		clocks = <&clock CLK_TSADC>;
 		clock-names = "adc";
 		#io-channel-cells = <1>;
 		io-channel-ranges;
+		samsung,syscon-phandle = <&pmu_system_controller>;
 		status = "disabled";
 	};
 

drivers/iio/accel/st_accel.h

@@ -33,8 +33,7 @@ static const struct st_sensors_platform_data default_accel_pdata = {
 	.drdy_int_pin = 1,
 };
 
-int st_accel_common_probe(struct iio_dev *indio_dev,
-					struct st_sensors_platform_data *pdata);
+int st_accel_common_probe(struct iio_dev *indio_dev);
 void st_accel_common_remove(struct iio_dev *indio_dev);
 
 #ifdef CONFIG_IIO_BUFFER

drivers/iio/accel/st_accel_core.c

@@ -161,7 +161,7 @@ static const struct iio_chan_spec st_accel_16bit_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };
 
-static const struct st_sensors st_accel_sensors[] = {
+static const struct st_sensor_settings st_accel_sensors_settings[] = {
 	{
 		.wai = ST_ACCEL_1_WAI_EXP,
 		.sensors_supported = {
@@ -457,8 +457,7 @@ static const struct iio_trigger_ops st_accel_trigger_ops = {
 #define ST_ACCEL_TRIGGER_OPS NULL
 #endif
 
-int st_accel_common_probe(struct iio_dev *indio_dev,
-				struct st_sensors_platform_data *plat_data)
+int st_accel_common_probe(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *adata = iio_priv(indio_dev);
 	int irq = adata->get_irq_data_ready(indio_dev);
@@ -470,24 +469,25 @@ int st_accel_common_probe(struct iio_dev *indio_dev,
 	st_sensors_power_enable(indio_dev);
 
 	err = st_sensors_check_device_support(indio_dev,
-				ARRAY_SIZE(st_accel_sensors), st_accel_sensors);
+					ARRAY_SIZE(st_accel_sensors_settings),
+					st_accel_sensors_settings);
 	if (err < 0)
 		return err;
 
 	adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS;
-	adata->multiread_bit = adata->sensor->multi_read_bit;
-	indio_dev->channels = adata->sensor->ch;
+	adata->multiread_bit = adata->sensor_settings->multi_read_bit;
+	indio_dev->channels = adata->sensor_settings->ch;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
 
 	adata->current_fullscale = (struct st_sensor_fullscale_avl *)
-						&adata->sensor->fs.fs_avl[0];
-	adata->odr = adata->sensor->odr.odr_avl[0].hz;
+					&adata->sensor_settings->fs.fs_avl[0];
+	adata->odr = adata->sensor_settings->odr.odr_avl[0].hz;
 
-	if (!plat_data)
-		plat_data =
+	if (!adata->dev->platform_data)
+		adata->dev->platform_data =
 			(struct st_sensors_platform_data *)&default_accel_pdata;
 
-	err = st_sensors_init_sensor(indio_dev, plat_data);
+	err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data);
 	if (err < 0)
 		return err;
 

drivers/iio/accel/st_accel_i2c.c

@@ -79,12 +79,11 @@ static int st_accel_i2c_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	adata = iio_priv(indio_dev);
-	adata->dev = &client->dev;
 	st_sensors_of_i2c_probe(client, st_accel_of_match);
 
 	st_sensors_i2c_configure(indio_dev, client, adata);
 
-	err = st_accel_common_probe(indio_dev, client->dev.platform_data);
+	err = st_accel_common_probe(indio_dev);
 	if (err < 0)
 		return err;
 

drivers/iio/accel/st_accel_spi.c

@@ -29,11 +29,10 @@ static int st_accel_spi_probe(struct spi_device *spi)
 		return -ENOMEM;
 
 	adata = iio_priv(indio_dev);
-	adata->dev = &spi->dev;
 
 	st_sensors_spi_configure(indio_dev, spi, adata);
 
-	err = st_accel_common_probe(indio_dev, spi->dev.platform_data);
+	err = st_accel_common_probe(indio_dev);
 	if (err < 0)
 		return err;
 

drivers/iio/adc/Kconfig

@@ -206,6 +206,20 @@ config NAU7802
 	  To compile this driver as a module, choose M here: the
 	  module will be called nau7802.
 
+config QCOM_SPMI_IADC
+	tristate "Qualcomm SPMI PMIC current ADC"
+	depends on SPMI
+	select REGMAP_SPMI
+	help
+	  This is the IIO Current ADC driver for Qualcomm QPNP IADC Chip.
+
+	  The driver supports single mode operation to read from one of two
+	  channels (external or internal). Hardware have additional
+	  channels internally used for gain and offset calibration.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called qcom-spmi-iadc.
+
 config ROCKCHIP_SARADC
 	tristate "Rockchip SARADC driver"
 	depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST)

drivers/iio/adc/Makefile

@@ -22,6 +22,7 @@ obj-$(CONFIG_MCP320X) += mcp320x.o
 obj-$(CONFIG_MCP3422) += mcp3422.o
 obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
 obj-$(CONFIG_NAU7802) += nau7802.o
+obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o
 obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
 obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
 obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o