Merge tag 'tegra-for-4.1-dt' of git://git.kernel.org/pub/scm/linux/ke…

…rnel/git/tegra/linux into next/dt

Merge "ARM: tegra: Device tree changes for v4.1-rc1" from Thierry Reding:

A bunch of changes to improve support on the Nyan Big (Acer Chromebook
13). These enable the trackpad and make the WiFi card work. Changes to
the userspace-exposed name of the soundcard are required for a better
audio experience.

Support for Nyan Blaze (HP Chromebook 14) is added. It is very similar
to Nyan Big and therefore can enjoys many of the above improvements.

Since the EMC driver can now be used to scale the frequency at which
external memory is clocked, corresponding EMC frequency tables are added
for Jetson TK1 and the Nyan boards.

The Jetson TK1, Beaver and Nyan boards now also use generated pinmux
data, which makes it easier to keep it in sync with the data provided by
syseng.

* tag 'tegra-for-4.1-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Add EMC timings to Nyan Blaze device tree
  ARM: tegra: Add EMC timings to Nyan Big device tree
  ARM: tegra: Add EMC timings to Jetson TK1 device tree
  ARM: tegra: Add EMC to Tegra124 device tree
  ARM: tegra: Add Tegra124 ACTMON support
  of: Add binding for NVIDIA Tegra ACTMON node
  ARM: tegra: nyan: The WiFi card is kept powered during suspend
  ARM: tegra: nyan: Add gpio-restart node
  ARM: tegra: nyan: Set maximum frequency for SPI flash
  ARM: tegra: Use generated pinmux data for Nyan Big
  ARM: tegra: Use pwrseq-simple for the wifi in Nyan
  ARM: tegra: Add node for trackpad in Nyan boards
  ARM: tegra: Add DTS for the nyan-blaze board
  ARM: tegra: Move generic parts out of the nyan-big DT
  ARM: tegra: Change model of sound card in Nyan Big
  ARM: tegra: Use generated pinmux for Beaver board
  ARM: tegra: Import latest Jetson TK1 pinmux

Signed-off-by: Olof Johansson <[email protected]>

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt

@@ -0,0 +1,32 @@
+NVIDIA Tegra Activity Monitor
+
+The activity monitor block collects statistics about the behaviour of other
+components in the system. This information can be used to derive the rate at
+which the external memory needs to be clocked in order to serve all requests
+from the monitored clients.
+
+Required properties:
+- compatible: should be "nvidia,tegra<chip>-actmon"
+- reg: offset and length of the register set for the device
+- interrupts: standard interrupt property
+- clocks: Must contain a phandle and clock specifier pair for each entry in
+clock-names. See ../../clock/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - actmon
+  - emc
+- resets: Must contain an entry for each entry in reset-names. See
+../../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - actmon
+
+Example:
+	actmon@6000c800 {
+		compatible = "nvidia,tegra124-actmon";
+		reg = <0x0 0x6000c800 0x0 0x400>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_ACTMON>,
+			 <&tegra_car TEGRA124_CLK_EMC>;
+		clock-names = "actmon", "emc";
+		resets = <&tegra_car 119>;
+		reset-names = "actmon";
+	};

arch/arm/boot/dts/Makefile

@@ -588,6 +588,7 @@ dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
 dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
 	tegra124-jetson-tk1.dtb \
 	tegra124-nyan-big.dtb \
+	tegra124-nyan-blaze.dtb \
 	tegra124-venice2.dtb
 dtb-$(CONFIG_ARCH_U300) += \
 	ste-u300.dtb