Merge 3.3-rc7 into usb-next

This resolves the conflict with drivers/usb/host/ehci-fsl.h that happened with changes in Linus's and this branch at the same time. Signed-off-by: Greg Kroah-Hartman <[email protected]>
powerwareeasyman · Mar 12, 2012 · f7a0d42 · f7a0d42
2 parents fde7d90 + b790f5d
commit f7a0d42
Show file tree

Hide file tree

Showing 253 changed files with 8,198 additions and 4,852 deletions.
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
@@ -182,3 +182,14 @@ Description:
 		USB2 hardware LPM is enabled for the device. Developer can
 		write y/Y/1 or n/N/0 to the file to enable/disable the
 		feature.
+
+What:		/sys/bus/usb/devices/.../removable
+Date:		February 2012
+Contact:	Matthew Garrett <[email protected]>
+Description:
+		Some information about whether a given USB device is
+		physically fixed to the platform can be inferred from a
+		combination of hub decriptor bits and platform-specific data
+		such as ACPI. This file will read either "removable" or
+		"fixed" if the information is available, and "unknown"
+		otherwise.
diff --git a/arch/arm/mach-imx/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c
@@ -158,7 +158,7 @@ static int devboard_usbh1_hw_init(struct platform_device *pdev)
 #define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
 #define USBH1_MODE	IOMUX_TO_GPIO(MX31_PIN_NFALE)
 
-static int devboard_isp1105_init(struct otg_transceiver *otg)
+static int devboard_isp1105_init(struct usb_phy *otg)
 {
 	int ret = gpio_request(USBH1_MODE, "usbh1-mode");
 	if (ret)
@@ -177,7 +177,7 @@ static int devboard_isp1105_init(struct otg_transceiver *otg)
 }
 
 
-static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
+static int devboard_isp1105_set_vbus(struct usb_otg *otg, bool on)
 {
 	if (on)
 		gpio_set_value(USBH1_VBUSEN_B, 0);
@@ -194,18 +194,24 @@ static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
 
 static int __init devboard_usbh1_init(void)
 {
-	struct otg_transceiver *otg;
+	struct usb_phy *phy;
 	struct platform_device *pdev;
 
-	otg = kzalloc(sizeof(*otg), GFP_KERNEL);
-	if (!otg)
+	phy = kzalloc(sizeof(*phy), GFP_KERNEL);
+	if (!phy)
 		return -ENOMEM;
 
-	otg->label	= "ISP1105";
-	otg->init	= devboard_isp1105_init;
-	otg->set_vbus	= devboard_isp1105_set_vbus;
+	phy->otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
+	if (!phy->otg) {
+		kfree(phy);
+		return -ENOMEM;
+	}
+
+	phy->label	= "ISP1105";
+	phy->init	= devboard_isp1105_init;
+	phy->otg->set_vbus	= devboard_isp1105_set_vbus;
 
-	usbh1_pdata.otg = otg;
+	usbh1_pdata.otg = phy;
 
 	pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
 	if (IS_ERR(pdev))

diff --git a/arch/arm/mach-imx/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c
@@ -272,7 +272,7 @@ static int marxbot_usbh1_hw_init(struct platform_device *pdev)
 #define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
 #define USBH1_MODE	IOMUX_TO_GPIO(MX31_PIN_NFALE)
 
-static int marxbot_isp1105_init(struct otg_transceiver *otg)
+static int marxbot_isp1105_init(struct usb_phy *otg)
 {
 	int ret = gpio_request(USBH1_MODE, "usbh1-mode");
 	if (ret)
@@ -291,7 +291,7 @@ static int marxbot_isp1105_init(struct otg_transceiver *otg)
 }
 
 
-static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
+static int marxbot_isp1105_set_vbus(struct usb_otg *otg, bool on)
 {
 	if (on)
 		gpio_set_value(USBH1_VBUSEN_B, 0);
@@ -308,18 +308,24 @@ static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
 
 static int __init marxbot_usbh1_init(void)
 {
-	struct otg_transceiver *otg;
+	struct usb_phy *phy;
 	struct platform_device *pdev;
 
-	otg = kzalloc(sizeof(*otg), GFP_KERNEL);
-	if (!otg)
+	phy = kzalloc(sizeof(*phy), GFP_KERNEL);
+	if (!phy)
 		return -ENOMEM;
 
-	otg->label	= "ISP1105";
-	otg->init	= marxbot_isp1105_init;
-	otg->set_vbus	= marxbot_isp1105_set_vbus;
+	phy->otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
+	if (!phy->otg) {
+		kfree(phy);
+		return -ENOMEM;
+	}
+
+	phy->label	= "ISP1105";
+	phy->init	= marxbot_isp1105_init;
+	phy->otg->set_vbus	= marxbot_isp1105_set_vbus;
 
-	usbh1_pdata.otg = otg;
+	usbh1_pdata.otg = phy;
 
 	pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
 	if (IS_ERR(pdev))

diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
@@ -33,7 +33,7 @@ struct pxa3xx_u2d_ulpi {
 	struct clk		*clk;
 	void __iomem		*mmio_base;
 
-	struct otg_transceiver	*otg;
+	struct usb_phy		*otg;
 	unsigned int		ulpi_mode;
 };
 
@@ -79,7 +79,7 @@ static int pxa310_ulpi_poll(void)
 	return -ETIMEDOUT;
 }
 
-static int pxa310_ulpi_read(struct otg_transceiver *otg, u32 reg)
+static int pxa310_ulpi_read(struct usb_phy *otg, u32 reg)
 {
 	int err;
 
@@ -98,7 +98,7 @@ static int pxa310_ulpi_read(struct otg_transceiver *otg, u32 reg)
 	return u2d_readl(U2DOTGUCR) & U2DOTGUCR_RDATA;
 }
 
-static int pxa310_ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
+static int pxa310_ulpi_write(struct usb_phy *otg, u32 val, u32 reg)
 {
 	if (pxa310_ulpi_get_phymode() != SYNCH) {
 		pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
@@ -111,7 +111,7 @@ static int pxa310_ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
 	return pxa310_ulpi_poll();
 }
 
-struct otg_io_access_ops pxa310_ulpi_access_ops = {
+struct usb_phy_io_ops pxa310_ulpi_access_ops = {
 	.read	= pxa310_ulpi_read,
 	.write	= pxa310_ulpi_write,
 };
@@ -139,19 +139,19 @@ static int pxa310_start_otg_host_transcvr(struct usb_bus *host)
 
 	pxa310_otg_transceiver_rtsm();
 
-	err = otg_init(u2d->otg);
+	err = usb_phy_init(u2d->otg);
 	if (err) {
 		pr_err("OTG transceiver init failed");
 		return err;
 	}
 
-	err = otg_set_vbus(u2d->otg, 1);
+	err = otg_set_vbus(u2d->otg->otg, 1);
 	if (err) {
 		pr_err("OTG transceiver VBUS set failed");
 		return err;
 	}
 
-	err = otg_set_host(u2d->otg, host);
+	err = otg_set_host(u2d->otg->otg, host);
 	if (err)
 		pr_err("OTG transceiver Host mode set failed");
 
@@ -189,9 +189,9 @@ static void pxa310_stop_otg_hc(void)
 {
 	pxa310_otg_transceiver_rtsm();
 
-	otg_set_host(u2d->otg, NULL);
-	otg_set_vbus(u2d->otg, 0);
-	otg_shutdown(u2d->otg);
+	otg_set_host(u2d->otg->otg, NULL);
+	otg_set_vbus(u2d->otg->otg, 0);
+	usb_phy_shutdown(u2d->otg);
 }
 
 static void pxa310_u2d_setup_otg_hc(void)

diff --git a/arch/arm/mach-tegra/include/mach/usb_phy.h b/arch/arm/mach-tegra/include/mach/usb_phy.h
@@ -58,7 +58,7 @@ struct tegra_usb_phy {
 	struct clk *pad_clk;
 	enum tegra_usb_phy_mode mode;
 	void *config;
-	struct otg_transceiver *ulpi;
+	struct usb_phy *ulpi;
 };
 
 struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,

diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c
@@ -608,13 +608,13 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
 	writel(val, base + ULPI_TIMING_CTRL_1);
 
 	/* Fix VbusInvalid due to floating VBUS */
-	ret = otg_io_write(phy->ulpi, 0x40, 0x08);
+	ret = usb_phy_io_write(phy->ulpi, 0x40, 0x08);
 	if (ret) {
 		pr_err("%s: ulpi write failed\n", __func__);
 		return ret;
 	}
 
-	ret = otg_io_write(phy->ulpi, 0x80, 0x0B);
+	ret = usb_phy_io_write(phy->ulpi, 0x80, 0x0B);
 	if (ret) {
 		pr_err("%s: ulpi write failed\n", __func__);
 		return ret;

diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
@@ -44,7 +44,7 @@ struct mxc_usbh_platform_data {
 	int (*exit)(struct platform_device *pdev);
 
 	unsigned int		 portsc;
-	struct otg_transceiver	*otg;
+	struct usb_phy		*otg;
 };
 
 int mx51_initialize_usb_hw(int port, unsigned int flags);

diff --git a/arch/arm/plat-mxc/include/mach/ulpi.h b/arch/arm/plat-mxc/include/mach/ulpi.h
@@ -2,15 +2,15 @@
 #define __MACH_ULPI_H
 
 #ifdef CONFIG_USB_ULPI
-struct otg_transceiver *imx_otg_ulpi_create(unsigned int flags);
+struct usb_phy *imx_otg_ulpi_create(unsigned int flags);
 #else
-static inline struct otg_transceiver *imx_otg_ulpi_create(unsigned int flags)
+static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
 {
 	return NULL;
 }
 #endif
 
-extern struct otg_io_access_ops mxc_ulpi_access_ops;
+extern struct usb_phy_io_ops mxc_ulpi_access_ops;
 
 #endif /* __MACH_ULPI_H */
 
diff --git a/arch/arm/plat-mxc/ulpi.c b/arch/arm/plat-mxc/ulpi.c
@@ -58,7 +58,7 @@ static int ulpi_poll(void __iomem *view, u32 bit)
 	return -ETIMEDOUT;
 }
 
-static int ulpi_read(struct otg_transceiver *otg, u32 reg)
+static int ulpi_read(struct usb_phy *otg, u32 reg)
 {
 	int ret;
 	void __iomem *view = otg->io_priv;
@@ -84,7 +84,7 @@ static int ulpi_read(struct otg_transceiver *otg, u32 reg)
 	return (__raw_readl(view) >> ULPIVW_RDATA_SHIFT) & ULPIVW_RDATA_MASK;
 }
 
-static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
+static int ulpi_write(struct usb_phy *otg, u32 val, u32 reg)
 {
 	int ret;
 	void __iomem *view = otg->io_priv;
@@ -106,13 +106,13 @@ static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
 	return ulpi_poll(view, ULPIVW_RUN);
 }
 
-struct otg_io_access_ops mxc_ulpi_access_ops = {
+struct usb_phy_io_ops mxc_ulpi_access_ops = {
 	.read	= ulpi_read,
 	.write	= ulpi_write,
 };
 EXPORT_SYMBOL_GPL(mxc_ulpi_access_ops);
 
-struct otg_transceiver *imx_otg_ulpi_create(unsigned int flags)
+struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
 {
 	return otg_ulpi_create(&mxc_ulpi_access_ops, flags);
 }
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
@@ -117,43 +117,6 @@
 
 #define UB_SENSE_SIZE  18
 
-/*
- */
-
-/* command block wrapper */
-struct bulk_cb_wrap {
-	__le32	Signature;		/* contains 'USBC' */
-	u32	Tag;			/* unique per command id */
-	__le32	DataTransferLength;	/* size of data */
-	u8	Flags;			/* direction in bit 0 */
-	u8	Lun;			/* LUN */
-	u8	Length;			/* of of the CDB */
-	u8	CDB[UB_MAX_CDB_SIZE];	/* max command */
-};
-
-#define US_BULK_CB_WRAP_LEN	31
-#define US_BULK_CB_SIGN		0x43425355	/*spells out USBC */
-#define US_BULK_FLAG_IN		1
-#define US_BULK_FLAG_OUT	0
-
-/* command status wrapper */
-struct bulk_cs_wrap {
-	__le32	Signature;		/* should = 'USBS' */
-	u32	Tag;			/* same as original command */
-	__le32	Residue;		/* amount not transferred */
-	u8	Status;			/* see below */
-};
-
-#define US_BULK_CS_WRAP_LEN	13
-#define US_BULK_CS_SIGN		0x53425355	/* spells out 'USBS' */
-#define US_BULK_STAT_OK		0
-#define US_BULK_STAT_FAIL	1
-#define US_BULK_STAT_PHASE	2
-
-/* bulk-only class specific requests */
-#define US_BULK_RESET_REQUEST	0xff
-#define US_BULK_GET_MAX_LUN	0xfe
-
 /*
  */
 struct ub_dev;

diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
@@ -398,6 +398,27 @@ config USB_NET_KALMIA
 	  To compile this driver as a module, choose M here: the
 	  module will be called kalmia.
 
+config USB_NET_QMI_WWAN
+	tristate "QMI WWAN driver for Qualcomm MSM based 3G and LTE modems"
+	depends on USB_USBNET
+	help
+	  Support WWAN LTE/3G devices based on Qualcomm Mobile Data Modem
+	  (MDM) chipsets.  Examples of such devices are
+	    * Huawei E392/E398
+
+	  This driver will only drive the ethernet part of the chips.
+	  The devices require additional configuration to be usable.
+	  Multiple management interfaces with linux drivers are
+	  available:
+
+	    * option: AT commands on /dev/ttyUSBx
+	    * cdc-wdm: Qualcomm MSM Interface (QMI) protocol on /dev/cdc-wdmx
+
+	  A modem manager with support for QMI is recommended.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called qmi_wwan.
+
 config USB_HSO
 	tristate "Option USB High Speed Mobile Devices"
 	depends on USB && RFKILL
@@ -461,4 +482,5 @@ config USB_VL600
 
 	  http://ubuntuforums.org/showpost.php?p=10589647&postcount=17
 
+
 endmenu
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
@@ -29,4 +29,5 @@ obj-$(CONFIG_USB_SIERRA_NET)	+= sierra_net.o
 obj-$(CONFIG_USB_NET_CX82310_ETH)	+= cx82310_eth.o
 obj-$(CONFIG_USB_NET_CDC_NCM)	+= cdc_ncm.o
 obj-$(CONFIG_USB_VL600)		+= lg-vl600.o
+obj-$(CONFIG_USB_NET_QMI_WWAN)	+= qmi_wwan.o