start_end: Fix chamber handling (issue jschuh#97)

pspotato · May 13, 2023 · 8204294 · 8204294
1 parent b3d8d9b
commit 8204294
Showing 1 changed file with 4 additions and 3 deletions.
diff --git a/start_end.cfg b/start_end.cfg
@@ -15,8 +15,7 @@ gcode:
   CLEAR_PAUSE
   {% set BED = params.BED|default(params.BED_TEMP)|float %}
   {% set EXTRUDER = params.EXTRUDER|default(params.EXTRUDER_TEMP)|float %}
-  {% set CHAMBER = params.CHAMBER|default(0)|float
-                   if "chamber" in printer.heaters.available_heaters else 0.0 %}
+  {% set CHAMBER = params.CHAMBER|default(0)|float %}
   {% set settings = printer["gcode_macro print_start_set"].settings %}
   {% set MESH_MIN = params.MESH_MIN|default(settings.MESH_MIN)|default(None) %}
   {% set MESH_MAX = params.MESH_MAX|default(settings.MESH_MAX)|default(None) %}
@@ -115,7 +114,9 @@ description: Parks the extruder if the current temperature of the supplied
   Usage: _KM_PARK_IF_NEEDED HEATER=<heater> RANGE=[<percentage>|ABOVE|BELOW]
 gcode:
   # This needs to get called as its own macro to get the current temp evaluated.
-  {% set HEATER = params.HEATER %}
+  {% set HEATER = params.HEATER if params.HEATER in
+                    printer.heaters.available_heaters else
+                  ("heater_generic " ~ params.HEATER) %}
   {% set RANGE = (params.RANGE|default(1))|string|upper %}
 
   {% if printer[HEATER].target %}