Programming as Conversation 2: Selection with if...end and Statement Modifiers

Learning Goals

• Write an if...end statement
• Write an if...else...end Statement
• Write an if...elsif...else...end Statement
• Use statement modifiers to change default sequence

Introduction

We've covered the default sequence Ruby follows when reading and executing a Ruby file. Let's teach the sequence to change by using the selection statement: if...end.

In this lab, we will cover the basics of if...end statements. At the end, you will need to write your own code and pass the included test.

Write an if...end Statement

To write a basic if...end statement in Ruby, the first line should start with if, followed by a condition. If this thing is true...

if <something that is either true or false>

Following this line, we can add some code that we want to run when the if statement is true. This code is conditional - it may or may not run! To let Ruby know we're done writing conditional code, we add end.

if true
  puts "This code runs!"
end

Run in IRB, the above code will output

This code runs
 => nil

The code inside the if...end statement below will never run:

if false
  puts "This code does not run. You will not see this in IRB"
end

Instead of writing true or false, we typically use a variable or expression.

run_code_inside = true
puts "Code before if...end"
if run_code_inside
  puts "code inside"
end
puts "Code after if...end"

Try entering this code in your file and try running it. The output should be the following:

Code before if...end
code inside
Code after if...end

Following the default sequence we:

1. Assign run_code_inside
2. Print out with puts "Code before if...end"
3. Reach the if statement
4. Evaluate the expression to the right of the if statement
5. Since the expression run_code_inside evaluates true, we perform the code between the if and end reserved words
6. Print out with puts "Code after if...end"

Try changing run_code_inside from true to false and see how the default sequence operates:

1. Assign run_code_inside
2. Print out with puts "Code before if...end"
3. Reach the if statement
4. Evaluate the expression to the right of the if statement
5. Since the expression run_code_inside evaluates false, we skip to the end reserved word
6. Print out with puts "Code after if...end"

We are essentially saying we want to execute our code, but we want to "mute" this one part of if.

Write an if...else...end Statement

A slightly more advanced version of if...end is if...else...end. In this code, we are guaranteed that the code in ONE of the two blocs will run (as the Boolean expression can only ever be one of two choices).

chance_of_rain = 0.2
puts "Let's go outside!"
if chance_of_rain > 0.5
  puts "Pack an umbrella!"
else
  puts "Enjoy the fine day!"
end
puts "Oh, and always wear sunscreen!"

The output is the following when the chance of rain is <= 0.5:

Let's go outside!
Enjoy the fine day!
Oh, and always wear sunscreen!

If we change chance_of_rain to 1, we get:

Let's go outside!
Pack an umbrella!
Oh, and always wear sunscreen!

In an if...else...end statement, if the expression to the right of if evaluates true, the work between if and else is run. If the expression to the right of if evaluates false, the code between else and end runs.

Write an if...elsif...else...end Statement

Sometimes choices are strictly limited to a path A or path B option, sometimes there's a third, fourth, option. In that case we need the if...elsif...else...end statement.

chance_of_rain = 0.2
if chance_of_rain <= 0.25
  puts "Pack a sun shelter!"
elsif (chance_of_rain > 0.25 && chance_of_rain < 0.75)
  puts "Pack an umbrella!"
else
  puts "Stay home and read Hegel."
end

Try filling in a table by changing the value of chance_of_rain. You'll see that you get different output!

chance_of_rain value	Output
0.0000001
0.2
0.2000001
0.3
0.9
1000
-23

Use Statement Modifiers to Change Default Sequence

Ruby has a useful feature called a statement modifier that allows you to put a conditional at the end of a statement. For example, let's consider this statement:

puts "Hey, it's 2019!"

However, we don't want to say "Hey, it's 2019!" every time this code is run. We only want to say it's 2019 if it's actually 2019. This is a good case for an if statement modifier.

puts "You know what year it is??"
this_year = 2019
puts "Hey, it's 2019!" if this_year == 2019

With output:

You know what year it is??
Hey, it's 2019!

Now, with the statement modifier if this_year == 2019 we are only putting it if the year is, in fact, 2019.

We can also use unless in a statement modifier as well.

LOGICAL FACT: The English Logician Augustus DeMorgan proved that "if-not" is equal to "unless." This had huge implications for the construction of CPUs, but he discovered it in the era of inkwells and steamer ships. See DeMorgan's Laws

this_year = 2019
puts "Hey, it's not 2019!" unless this_year == 2019

STRETCH: Here we've hard-coded the year in this_year. If you want to ask Ruby to tell you the year, ask IRB what Time.now.year gives you. That expression could be assigned to this_year if you want more robust — and thus better — code! It's a common practice for developers to try out an expression in IRB, verify it, make sure they understand it, and then integrate it into their code.

Your Challenge

Now that we've seen a few examples of selection statements, it is time to test our knowledge. Your task is to write an if...else...end statement. For this statement, the condition will be based on the current time:

• If the current second is an even number, output Even!
• If the current second is an odd number, output Odd!

To determine the exact time, we can rely on Ruby's built-in Time class. In IRB, running Time.now will give you the current time:

2.6.1 :001 > Time.now
  => 2020-02-25 09:00:33 -0500

In the example above, the time is 09:00:33 AM. Similar to a String, Time is a class in Ruby and Time.now returns a Time object. It isn't a String and it isn't an Integer, but like them, it can be stored in a variable.

2.6.1 :002 > current_time = Time.now
  => 2020-02-25 09:07:47 -0500

And it can be converted to either:

2.6.1 :003 > current_time.to_s
  => "2020-02-25 09:07:47 -0500"
2.6.1 :004 > current_time.to_i
  => 1582639667

Note: Converting a Time object to an integer returns Epoch time, the number of seconds since January 1st, 1970.

So we can get the current time, and we can convert this time into an integer. But how can we incorporate this into an expression that evaluates to true or false?

Try to work out a solution using what you've learned about if...else...end statements and Boolean expressions. Write your answer in lib/if_else_end.rb and run learn to see your test progress.

Solving This Lab

There are multiple ways to solve this lab and we will look at two possible solutions. Remember, the task is to output either Even! or Odd! depending on the current second.

Solution One

We can write out a lot of the code without knowing all of it exactly. First, we can write the if...else...end statements, but we'll leave out the condition for the moment:

if true
  puts "Even!"
else
  puts "Odd!"
end

With the setup above, the output will always be Even!. To change that, we will need to replace true with an expression based on Time.now that deterrmines if the current second is even or odd.

We might start by capturing the Time.now value:

current_time = Time.now

Convert it to an integer

current_time = current_time.to_i

If we recall the lesson on arithmetic, the modulo operator, %, can be used to tell if an integer is even or odd:

current_time = Time.now
current_time = current_time.to_i

if current_time % 2 == 0
  puts "Even!"
else
  puts "Odd!"
end

The expression current_time % 2 will either return a zero or one. If we add == 0 to it, the complete expression will compare the results of current_time % 2 to zero. Therefor, if the current_time is an even second, the expression will evaluate to true.

We could actually clean up our code a bit if we choose, and skip using the current_time variable entirely:

if Time.now.to_i % 2 == 0
  puts "Even!"
else
  puts "Odd!"
end

Solution Two

Taking a quick look at the [Integer class][integer] in Ruby, it turns out there is a built-in tool for checking if any integer is even - the .even? method:

current_time = Time.now
current_time = current_time.to_i

if current_time.even?
  puts "Even!"
else
  puts "Odd!"
end

This should now satisfy the test requirements. Run learn to confirm you've passed the two tests in this lab.

Conclusion

Selection statements are a core part of programming. They allow us to make our code more dynamic. Our example based on seconds may not be the most applicable, but there are definitely times when we might want some piece of code to only run on specific hours or days. More often, especially as we are learning, conditional statements are a great way to output our own messages. We could, for instance, confirm our own beliefs about a piece of code we've written by adding an if...end statement after it and comparing the result of our code against what we expect.

result = 2 + 2

if result == 4
  puts "We've done it!"
end