Merge tag 'asoc-v3.15-5' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/broonie/sound into for-linus

ASoC: Fixes for v3.15

A smattering of device specific fixes, nothing stands out here except
for the multiplatform fixes for Samsung and the device IDs being added
by Stephen Warren - there's no real code changes from those and they
give better robustness to the enumeration with DT.

Documentation/devicetree/bindings/sound/fsl,ssi.txt

@@ -20,15 +20,6 @@ Required properties:
                     have.
 - interrupt-parent: The phandle for the interrupt controller that
                     services interrupts for this device.
-- fsl,mode:         The operating mode for the SSI interface.
-                    "i2s-slave" - I2S mode, SSI is clock slave
-                    "i2s-master" - I2S mode, SSI is clock master
-                    "lj-slave" - left-justified mode, SSI is clock slave
-                    "lj-master" - l.j. mode, SSI is clock master
-                    "rj-slave" - right-justified mode, SSI is clock slave
-                    "rj-master" - r.j., SSI is clock master
-                    "ac97-slave" - AC97 mode, SSI is clock slave
-                    "ac97-master" - AC97 mode, SSI is clock master
 - fsl,playback-dma: Phandle to a node for the DMA channel to use for
                     playback of audio.  This is typically dictated by SOC
                     design.  See the notes below.
@@ -47,6 +38,9 @@ Required properties:
                     be connected together, and SRFS and STFS be connected
                     together.  This would still allow different sample sizes,
                     but not different sample rates.
+ - clocks:          "ipg" - Required clock for the SSI unit
+                    "baud" - Required clock for SSI master mode. Otherwise this
+		      clock is not used
 
 Required are also ac97 link bindings if ac97 is used. See
 Documentation/devicetree/bindings/sound/soc-ac97link.txt for the necessary
@@ -64,6 +58,15 @@ Optional properties:
 		    Documentation/devicetree/bindings/dma/dma.txt.
 - dma-names:	    Two dmas have to be defined, "tx" and "rx", if fsl,imx-fiq
 		    is not defined.
+- fsl,mode:         The operating mode for the SSI interface.
+                    "i2s-slave" - I2S mode, SSI is clock slave
+                    "i2s-master" - I2S mode, SSI is clock master
+                    "lj-slave" - left-justified mode, SSI is clock slave
+                    "lj-master" - l.j. mode, SSI is clock master
+                    "rj-slave" - right-justified mode, SSI is clock slave
+                    "rj-master" - r.j., SSI is clock master
+                    "ac97-slave" - AC97 mode, SSI is clock slave
+                    "ac97-master" - AC97 mode, SSI is clock master
 
 Child 'codec' node required properties:
 - compatible:       Compatible list, contains the name of the codec

MAINTAINERS

@@ -1832,8 +1832,8 @@ F:	net/bluetooth/
 F:	include/net/bluetooth/
 
 BONDING DRIVER
-M:	Jay Vosburgh <[email protected].com>
-M:	Veaceslav Falico <vfalico@redhat.com>
+M:	Jay Vosburgh <j.vosburgh@gmail.com>
+M:	Veaceslav Falico <vfalico@gmail.com>
 M:	Andy Gospodarek <[email protected]>
 L:	[email protected]
 W:	http://sourceforge.net/projects/bonding/
@@ -2808,9 +2808,9 @@ S:	Supported
 F:	drivers/acpi/dock.c
 
 DOCUMENTATION
-M:	Rob Landley <[email protected]>
+M:	Randy Dunlap <[email protected]>
 L:	[email protected]
-T:	TBD
+T:	quilt http://www.infradead.org/~rdunlap/Doc/patches/
 S:	Maintained
 F:	Documentation/
 
@@ -6013,6 +6013,7 @@ F:	include/uapi/linux/net.h
 F:	include/uapi/linux/netdevice.h
 F:	tools/net/
 F:	tools/testing/selftests/net/
+F:	lib/random32.c
 
 NETWORKING [IPv4/IPv6]
 M:	"David S. Miller" <[email protected]>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 14
 SUBLEVEL = 0
-EXTRAVERSION = -rc8
+EXTRAVERSION =
 NAME = Shuffling Zombie Juror
 
 # *DOCUMENTATION*

arch/x86/include/asm/pgtable.h

@@ -445,20 +445,10 @@ static inline int pte_same(pte_t a, pte_t b)
 	return a.pte == b.pte;
 }
 
-static inline int pteval_present(pteval_t pteval)
-{
-	/*
-	 * Yes Linus, _PAGE_PROTNONE == _PAGE_NUMA. Expressing it this
-	 * way clearly states that the intent is that protnone and numa
-	 * hinting ptes are considered present for the purposes of
-	 * pagetable operations like zapping, protection changes, gup etc.
-	 */
-	return pteval & (_PAGE_PRESENT | _PAGE_PROTNONE | _PAGE_NUMA);
-}
-
 static inline int pte_present(pte_t a)
 {
-	return pteval_present(pte_flags(a));
+	return pte_flags(a) & (_PAGE_PRESENT | _PAGE_PROTNONE |
+			       _PAGE_NUMA);
 }
 
 #define pte_accessible pte_accessible

arch/x86/include/asm/topology.h

@@ -119,9 +119,10 @@ static inline void setup_node_to_cpumask_map(void) { }
 
 extern const struct cpumask *cpu_coregroup_mask(int cpu);
 
-#ifdef ENABLE_TOPO_DEFINES
 #define topology_physical_package_id(cpu)	(cpu_data(cpu).phys_proc_id)
 #define topology_core_id(cpu)			(cpu_data(cpu).cpu_core_id)
+
+#ifdef ENABLE_TOPO_DEFINES
 #define topology_core_cpumask(cpu)		(per_cpu(cpu_core_map, cpu))
 #define topology_thread_cpumask(cpu)		(per_cpu(cpu_sibling_map, cpu))
 #endif

arch/x86/xen/mmu.c

@@ -365,7 +365,7 @@ void xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr,
 /* Assume pteval_t is equivalent to all the other *val_t types. */
 static pteval_t pte_mfn_to_pfn(pteval_t val)
 {
-	if (pteval_present(val)) {
+	if (val & _PAGE_PRESENT) {
 		unsigned long mfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
 		unsigned long pfn = mfn_to_pfn(mfn);
 
@@ -381,7 +381,7 @@ static pteval_t pte_mfn_to_pfn(pteval_t val)
 
 static pteval_t pte_pfn_to_mfn(pteval_t val)
 {
-	if (pteval_present(val)) {
+	if (val & _PAGE_PRESENT) {
 		unsigned long pfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
 		pteval_t flags = val & PTE_FLAGS_MASK;
 		unsigned long mfn;

drivers/block/rbd.c

@@ -2109,7 +2109,6 @@ static void rbd_img_obj_callback(struct rbd_obj_request *obj_request)
 	rbd_assert(img_request->obj_request_count > 0);
 	rbd_assert(which != BAD_WHICH);
 	rbd_assert(which < img_request->obj_request_count);
-	rbd_assert(which >= img_request->next_completion);
 
 	spin_lock_irq(&img_request->completion_lock);
 	if (which != img_request->next_completion)

drivers/gpu/drm/i915/i915_gem_gtt.c

@@ -842,7 +842,7 @@ void i915_gem_suspend_gtt_mappings(struct drm_device *dev)
 	dev_priv->gtt.base.clear_range(&dev_priv->gtt.base,
 				       dev_priv->gtt.base.start / PAGE_SIZE,
 				       dev_priv->gtt.base.total / PAGE_SIZE,
-				       false);
+				       true);
 }
 
 void i915_gem_restore_gtt_mappings(struct drm_device *dev)

drivers/gpu/drm/nouveau/nouveau_drm.c

@@ -866,13 +866,16 @@ static int nouveau_pmops_runtime_suspend(struct device *dev)
 	struct drm_device *drm_dev = pci_get_drvdata(pdev);
 	int ret;
 
-	if (nouveau_runtime_pm == 0)
-		return -EINVAL;
+	if (nouveau_runtime_pm == 0) {
+		pm_runtime_forbid(dev);
+		return -EBUSY;
+	}
 
 	/* are we optimus enabled? */
 	if (nouveau_runtime_pm == -1 && !nouveau_is_optimus() && !nouveau_is_v1_dsm()) {
 		DRM_DEBUG_DRIVER("failing to power off - not optimus\n");
-		return -EINVAL;
+		pm_runtime_forbid(dev);
+		return -EBUSY;
 	}
 
 	nv_debug_level(SILENT);
@@ -923,12 +926,15 @@ static int nouveau_pmops_runtime_idle(struct device *dev)
 	struct nouveau_drm *drm = nouveau_drm(drm_dev);
 	struct drm_crtc *crtc;
 
-	if (nouveau_runtime_pm == 0)
+	if (nouveau_runtime_pm == 0) {
+		pm_runtime_forbid(dev);
 		return -EBUSY;
+	}
 
 	/* are we optimus enabled? */
 	if (nouveau_runtime_pm == -1 && !nouveau_is_optimus() && !nouveau_is_v1_dsm()) {
 		DRM_DEBUG_DRIVER("failing to power off - not optimus\n");
+		pm_runtime_forbid(dev);
 		return -EBUSY;
 	}
 

drivers/gpu/drm/radeon/radeon_drv.c

@@ -403,11 +403,15 @@ static int radeon_pmops_runtime_suspend(struct device *dev)
 	struct drm_device *drm_dev = pci_get_drvdata(pdev);
 	int ret;
 
-	if (radeon_runtime_pm == 0)
-		return -EINVAL;
+	if (radeon_runtime_pm == 0) {
+		pm_runtime_forbid(dev);
+		return -EBUSY;
+	}
 
-	if (radeon_runtime_pm == -1 && !radeon_is_px())
-		return -EINVAL;
+	if (radeon_runtime_pm == -1 && !radeon_is_px()) {
+		pm_runtime_forbid(dev);
+		return -EBUSY;
+	}
 
 	drm_dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
 	drm_kms_helper_poll_disable(drm_dev);
@@ -456,12 +460,15 @@ static int radeon_pmops_runtime_idle(struct device *dev)
 	struct drm_device *drm_dev = pci_get_drvdata(pdev);
 	struct drm_crtc *crtc;
 
-	if (radeon_runtime_pm == 0)
+	if (radeon_runtime_pm == 0) {
+		pm_runtime_forbid(dev);
 		return -EBUSY;
+	}
 
 	/* are we PX enabled? */
 	if (radeon_runtime_pm == -1 && !radeon_is_px()) {
 		DRM_DEBUG_DRIVER("failing to power off - not px\n");
+		pm_runtime_forbid(dev);
 		return -EBUSY;
 	}
 

drivers/gpu/drm/udl/udl_gem.c

@@ -177,8 +177,10 @@ void udl_gem_free_object(struct drm_gem_object *gem_obj)
 	if (obj->vmapping)
 		udl_gem_vunmap(obj);
 
-	if (gem_obj->import_attach)
+	if (gem_obj->import_attach) {
 		drm_prime_gem_destroy(gem_obj, obj->sg);
+		put_device(gem_obj->dev->dev);
+	}
 
 	if (obj->pages)
 		udl_gem_put_pages(obj);
@@ -256,9 +258,12 @@ struct drm_gem_object *udl_gem_prime_import(struct drm_device *dev,
 	int ret;
 
 	/* need to attach */
+	get_device(dev->dev);
 	attach = dma_buf_attach(dma_buf, dev->dev);
-	if (IS_ERR(attach))
+	if (IS_ERR(attach)) {
+		put_device(dev->dev);
 		return ERR_CAST(attach);
+	}
 
 	get_dma_buf(dma_buf);
 
@@ -282,6 +287,6 @@ struct drm_gem_object *udl_gem_prime_import(struct drm_device *dev,
 fail_detach:
 	dma_buf_detach(dma_buf, attach);
 	dma_buf_put(dma_buf);
-
+	put_device(dev->dev);
 	return ERR_PTR(ret);
 }

drivers/i2c/busses/i2c-cpm.c

@@ -39,7 +39,9 @@
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/dma-mapping.h>
+#include <linux/of_address.h>
 #include <linux/of_device.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <sysdev/fsl_soc.h>
 #include <asm/cpm.h>

drivers/input/evdev.c

@@ -954,11 +954,13 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 			return -EFAULT;
 
 		error = input_ff_upload(dev, &effect, file);
+		if (error)
+			return error;
 
 		if (put_user(effect.id, &(((struct ff_effect __user *)p)->id)))
 			return -EFAULT;
 
-		return error;
+		return 0;
 	}
 
 	/* Multi-number variable-length handlers */

drivers/input/keyboard/adp5588-keys.c

@@ -76,8 +76,18 @@ static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
 	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
 	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
 	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
+	int val;
 
-	return !!(adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank) & bit);
+	mutex_lock(&kpad->gpio_lock);
+
+	if (kpad->dir[bank] & bit)
+		val = kpad->dat_out[bank];
+	else
+		val = adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank);
+
+	mutex_unlock(&kpad->gpio_lock);
+
+	return !!(val & bit);
 }
 
 static void adp5588_gpio_set_value(struct gpio_chip *chip,

drivers/input/misc/da9052_onkey.c

@@ -27,29 +27,32 @@ struct da9052_onkey {
 
 static void da9052_onkey_query(struct da9052_onkey *onkey)
 {
-	int key_stat;
+	int ret;
 
-	key_stat = da9052_reg_read(onkey->da9052, DA9052_EVENT_B_REG);
-	if (key_stat < 0) {
+	ret = da9052_reg_read(onkey->da9052, DA9052_STATUS_A_REG);
+	if (ret < 0) {
 		dev_err(onkey->da9052->dev,
-			"Failed to read onkey event %d\n", key_stat);
+			"Failed to read onkey event err=%d\n", ret);
 	} else {
 		/*
 		 * Since interrupt for deassertion of ONKEY pin is not
 		 * generated, onkey event state determines the onkey
 		 * button state.
 		 */
-		key_stat &= DA9052_EVENTB_ENONKEY;
-		input_report_key(onkey->input, KEY_POWER, key_stat);
+		bool pressed = !(ret & DA9052_STATUSA_NONKEY);
+
+		input_report_key(onkey->input, KEY_POWER, pressed);
 		input_sync(onkey->input);
-	}
 
-	/*
-	 * Interrupt is generated only when the ONKEY pin is asserted.
-	 * Hence the deassertion of the pin is simulated through work queue.
-	 */
-	if (key_stat)
-		schedule_delayed_work(&onkey->work, msecs_to_jiffies(50));
+		/*
+		 * Interrupt is generated only when the ONKEY pin
+		 * is asserted.  Hence the deassertion of the pin
+		 * is simulated through work queue.
+		 */
+		if (pressed)
+			schedule_delayed_work(&onkey->work,
+						msecs_to_jiffies(50));
+	}
 }
 
 static void da9052_onkey_work(struct work_struct *work)

drivers/input/mouse/cypress_ps2.c

@@ -409,7 +409,6 @@ static int cypress_set_input_params(struct input_dev *input,
 	__clear_bit(REL_X, input->relbit);
 	__clear_bit(REL_Y, input->relbit);
 
-	__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
 	__set_bit(EV_KEY, input->evbit);
 	__set_bit(BTN_LEFT, input->keybit);
 	__set_bit(BTN_RIGHT, input->keybit);