Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/dtor/input

Pull input subsystem updates from Dmitry Torokhov:
 "- we finally merged driver for USB version of Synaptics touchpads
    (I guess most commonly found in IBM/Lenovo keyboard/touchpad combo);

   - a bunch of new drivers for embedded platforms (Cypress
     touchscreens, DA9052 OnKey, MAX8997-haptic, Ilitek ILI210x
     touchscreens, TI touchscreen);

   - input core allows clients to specify desired clock source for
     timestamps on input events (EVIOCSCLOCKID ioctl);

   - input core allows querying state of all MT slots for given event
     code via EVIOCGMTSLOTS ioctl;

   - various driver fixes and improvements."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits)
  Input: ili210x - add support for Ilitek ILI210x based touchscreens
  Input: altera_ps2 - use of_match_ptr()
  Input: synaptics_usb - switch to module_usb_driver()
  Input: convert I2C drivers to use module_i2c_driver()
  Input: convert SPI drivers to use module_spi_driver()
  Input: omap4-keypad - move platform_data to <linux/platform_data>
  Input: kxtj9 - who_am_i check value and initial data rate fixes
  Input: add driver support for MAX8997-haptic
  Input: tegra-kbc - revise device tree support
  Input: of_keymap - add device tree bindings for simple key matrices
  Input: wacom - fix physical size calculation for 3rd-gen Bamboo
  Input: twl4030-vibra - really switch from #if to #ifdef
  Input: hp680_ts_input - ensure arguments to request_irq and free_irq are compatible
  Input: max8925_onkey - avoid accessing input device too early
  Input: max8925_onkey - allow to be used as a wakeup source
  Input: atmel-wm97xx - convert to dev_pm_ops
  Input: atmel-wm97xx - set driver owner
  Input: add cyttsp touchscreen maintainer entry
  Input: cyttsp - remove useless checks in cyttsp_probe()
  Input: usbtouchscreen - add support for Data Modul EasyTouch TP 72037
  ...

Documentation/devicetree/bindings/input/matrix-keymap.txt

@@ -0,0 +1,19 @@
+A simple common binding for matrix-connected key boards. Currently targeted at
+defining the keys in the scope of linux key codes since that is a stable and
+standardized interface at this time.
+
+Required properties:
+- linux,keymap: an array of packed 1-cell entries containing the equivalent
+  of row, column and linux key-code. The 32-bit big endian cell is packed
+  as:
+	row << 24 | column << 16 | key-code
+
+Optional properties:
+Some users of this binding might choose to specify secondary keymaps for
+cases where there is a modifier key such as a Fn key. Proposed names
+for said properties are "linux,fn-keymap" or with another descriptive
+word for the modifier other from "Fn".
+
+Example:
+	linux,keymap = < 0x00030012
+			 0x0102003a >;

Documentation/devicetree/bindings/input/tegra-kbc.txt

@@ -3,16 +3,21 @@
 Required properties:
 - compatible: "nvidia,tegra20-kbc"
 
-Optional properties:
-- debounce-delay: delay in milliseconds per row scan for debouncing
-- repeat-delay: delay in milliseconds before repeat starts
-- ghost-filter: enable ghost filtering for this device
-- wakeup-source: configure keyboard as a wakeup source for suspend/resume
+Optional properties, in addition to those specified by the shared
+matrix-keyboard bindings:
+
+- linux,fn-keymap: a second keymap, same specification as the
+  matrix-keyboard-controller spec but to be used when the KEY_FN modifier
+  key is pressed.
+- nvidia,debounce-delay-ms: delay in milliseconds per row scan for debouncing
+- nvidia,repeat-delay-ms: delay in milliseconds before repeat starts
+- nvidia,ghost-filter: enable ghost filtering for this device
+- nvidia,wakeup-source: configure keyboard as a wakeup source for suspend/resume
 
 Example:
 
 keyboard: keyboard {
 	compatible = "nvidia,tegra20-kbc";
 	reg = <0x7000e200 0x100>;
-	ghost-filter;
+	nvidia,ghost-filter;
 };

MAINTAINERS

@@ -2109,6 +2109,13 @@ W:	http://www.cyclades.com/
 S:	Orphan
 F:	drivers/net/wan/pc300*
 
+CYTTSP TOUCHSCREEN DRIVER
+M:      Javier Martinez Canillas <[email protected]>
+L:      [email protected]
+S:      Maintained
+F:      drivers/input/touchscreen/cyttsp*
+F:      include/linux/input/cyttsp.h
+
 DAMA SLAVE for AX.25
 M:	Joerg Reuter <[email protected]>
 W:	http://yaina.de/jreuter/

arch/arm/mach-omap2/board-4430sdp.c

@@ -25,6 +25,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/leds.h>
 #include <linux/leds_pwm.h>
+#include <linux/platform_data/omap4-keypad.h>
 
 #include <mach/hardware.h>
 #include <asm/hardware/gic.h>

arch/arm/mach-omap2/devices.c

@@ -17,6 +17,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+#include <linux/platform_data/omap4-keypad.h>
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>

arch/arm/mach-tegra/include/mach/kbc.h

@@ -24,20 +24,21 @@
 #include <linux/types.h>
 #include <linux/input/matrix_keypad.h>
 
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
 #define KBC_MAX_GPIO	24
 #define KBC_MAX_KPENT	8
-#else
-#define KBC_MAX_GPIO	20
-#define KBC_MAX_KPENT	7
-#endif
 
 #define KBC_MAX_ROW	16
 #define KBC_MAX_COL	8
 #define KBC_MAX_KEY	(KBC_MAX_ROW * KBC_MAX_COL)
 
+enum tegra_pin_type {
+	PIN_CFG_IGNORE,
+	PIN_CFG_COL,
+	PIN_CFG_ROW,
+};
+
 struct tegra_kbc_pin_cfg {
-	bool is_row;
+	enum tegra_pin_type type;
 	unsigned char num;
 };
 

arch/arm/plat-omap/include/plat/omap4-keypad.h

@@ -1,15 +1,6 @@
 #ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H
 #define ARCH_ARM_PLAT_OMAP4_KEYPAD_H
 
-#include <linux/input/matrix_keypad.h>
-
-struct omap4_keypad_platform_data {
-	const struct matrix_keymap_data *keymap_data;
-
-	u8 rows;
-	u8 cols;
-};
-
 extern int omap4_keyboard_init(struct omap4_keypad_platform_data *,
 				struct omap_board_data *);
 #endif

arch/arm/plat-spear/include/plat/keyboard.h

@@ -15,7 +15,7 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/types.h>
 
-#define DECLARE_KEYMAP(_name) \
+#define DECLARE_9x9_KEYMAP(_name) \
 int _name[] = { \
 	KEY(0, 0, KEY_ESC), \
 	KEY(0, 1, KEY_1), \
@@ -62,24 +62,6 @@ int _name[] = { \
 	KEY(4, 6, KEY_Z), \
 	KEY(4, 7, KEY_X), \
 	KEY(4, 8, KEY_C), \
-	KEY(4, 0, KEY_L), \
-	KEY(4, 1, KEY_SEMICOLON), \
-	KEY(4, 2, KEY_APOSTROPHE), \
-	KEY(4, 3, KEY_GRAVE), \
-	KEY(4, 4, KEY_LEFTSHIFT), \
-	KEY(4, 5, KEY_BACKSLASH), \
-	KEY(4, 6, KEY_Z), \
-	KEY(4, 7, KEY_X), \
-	KEY(4, 8, KEY_C), \
-	KEY(4, 0, KEY_L), \
-	KEY(4, 1, KEY_SEMICOLON), \
-	KEY(4, 2, KEY_APOSTROPHE), \
-	KEY(4, 3, KEY_GRAVE), \
-	KEY(4, 4, KEY_LEFTSHIFT), \
-	KEY(4, 5, KEY_BACKSLASH), \
-	KEY(4, 6, KEY_Z), \
-	KEY(4, 7, KEY_X), \
-	KEY(4, 8, KEY_C), \
 	KEY(5, 0, KEY_V), \
 	KEY(5, 1, KEY_B), \
 	KEY(5, 2, KEY_N), \
@@ -118,17 +100,63 @@ int _name[] = { \
 	KEY(8, 8, KEY_KP0), \
 }
 
+#define DECLARE_6x6_KEYMAP(_name) \
+int _name[] = { \
+	KEY(0, 0, KEY_RESERVED), \
+	KEY(0, 1, KEY_1), \
+	KEY(0, 2, KEY_2), \
+	KEY(0, 3, KEY_3), \
+	KEY(0, 4, KEY_4), \
+	KEY(0, 5, KEY_5), \
+	KEY(1, 0, KEY_Q), \
+	KEY(1, 1, KEY_W), \
+	KEY(1, 2, KEY_E), \
+	KEY(1, 3, KEY_R), \
+	KEY(1, 4, KEY_T), \
+	KEY(1, 5, KEY_Y), \
+	KEY(2, 0, KEY_D), \
+	KEY(2, 1, KEY_F), \
+	KEY(2, 2, KEY_G), \
+	KEY(2, 3, KEY_H), \
+	KEY(2, 4, KEY_J), \
+	KEY(2, 5, KEY_K), \
+	KEY(3, 0, KEY_B), \
+	KEY(3, 1, KEY_N), \
+	KEY(3, 2, KEY_M), \
+	KEY(3, 3, KEY_COMMA), \
+	KEY(3, 4, KEY_DOT), \
+	KEY(3, 5, KEY_SLASH), \
+	KEY(4, 0, KEY_F6), \
+	KEY(4, 1, KEY_F7), \
+	KEY(4, 2, KEY_F8), \
+	KEY(4, 3, KEY_F9), \
+	KEY(4, 4, KEY_F10), \
+	KEY(4, 5, KEY_NUMLOCK), \
+	KEY(5, 0, KEY_KP2), \
+	KEY(5, 1, KEY_KP3), \
+	KEY(5, 2, KEY_KP0), \
+	KEY(5, 3, KEY_KPDOT), \
+	KEY(5, 4, KEY_RO), \
+	KEY(5, 5, KEY_ZENKAKUHANKAKU), \
+}
+
+#define KEYPAD_9x9     0
+#define KEYPAD_6x6     1
+#define KEYPAD_2x2     2
+
 /**
  * struct kbd_platform_data - spear keyboard platform data
  * keymap: pointer to keymap data (table and size)
  * rep: enables key autorepeat
+ * mode: choose keyboard support(9x9, 6x6, 2x2)
  *
  * This structure is supposed to be used by platform code to supply
  * keymaps to drivers that implement keyboards.
  */
 struct kbd_platform_data {
 	const struct matrix_keymap_data *keymap;
 	bool rep;
+	unsigned int mode;
 };
 
 /* This function is used to set platform data field of pdev->dev */

arch/m68k/q40/config.c

@@ -24,6 +24,7 @@
 #include <linux/rtc.h>
 #include <linux/vt_kern.h>
 #include <linux/bcd.h>
+#include <linux/platform_device.h>
 
 #include <asm/io.h>
 #include <asm/rtc.h>
@@ -329,3 +330,15 @@ static int q40_set_rtc_pll(struct rtc_pll_info *pll)
 	} else
 		return -EINVAL;
 }
+
+static __init int q40_add_kbd_device(void)
+{
+	struct platform_device *pdev;
+
+	pdev = platform_device_register_simple("q40kbd", -1, NULL, 0);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	return 0;
+}
+arch_initcall(q40_add_kbd_device);

drivers/hid/hid-core.c

@@ -1935,6 +1935,16 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0004) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PHILIPS, USB_DEVICE_ID_PHILIPS_IEEE802154_DONGLE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) },
+#if defined(CONFIG_MOUSE_SYNAPTICS_USB) || defined(CONFIG_MOUSE_SYNAPTICS_USB_MODULE)
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_TP) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_INT_TP) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_CPAD) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_STICK) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_WP) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_COMP_TP) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_WTP) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_DPAD) },
+#endif
 	{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },

drivers/hid/hid-ids.h

@@ -677,6 +677,17 @@
 #define USB_DEVICE_ID_SYMBOL_SCANNER_1	0x0800
 #define USB_DEVICE_ID_SYMBOL_SCANNER_2	0x1300
 
+#define USB_VENDOR_ID_SYNAPTICS		0x06cb
+#define USB_DEVICE_ID_SYNAPTICS_TP	0x0001
+#define USB_DEVICE_ID_SYNAPTICS_INT_TP	0x0002
+#define USB_DEVICE_ID_SYNAPTICS_CPAD	0x0003
+#define USB_DEVICE_ID_SYNAPTICS_TS	0x0006
+#define USB_DEVICE_ID_SYNAPTICS_STICK	0x0007
+#define USB_DEVICE_ID_SYNAPTICS_WP	0x0008
+#define USB_DEVICE_ID_SYNAPTICS_COMP_TP	0x0009
+#define USB_DEVICE_ID_SYNAPTICS_WTP	0x0010
+#define USB_DEVICE_ID_SYNAPTICS_DPAD	0x0013
+
 #define USB_VENDOR_ID_THRUSTMASTER	0x044f
 
 #define USB_VENDOR_ID_TIVO		0x150a

drivers/input/Kconfig

@@ -25,6 +25,10 @@ config INPUT
 
 if INPUT
 
+config INPUT_OF_MATRIX_KEYMAP
+	depends on USE_OF
+	bool
+
 config INPUT_FF_MEMLESS
 	tristate "Support for memoryless force-feedback devices"
 	help

drivers/input/Makefile

@@ -24,3 +24,4 @@ obj-$(CONFIG_INPUT_TOUCHSCREEN)	+= touchscreen/
 obj-$(CONFIG_INPUT_MISC)	+= misc/
 
 obj-$(CONFIG_INPUT_APMPOWER)	+= apm-power.o
+obj-$(CONFIG_INPUT_OF_MATRIX_KEYMAP) += of_keymap.o