Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git…

…/arm/arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) ARM: sa1100: fix build error ARM: OMAP1: recalculate loops per jiffy after dpll1 reprogram ARM: davinci: dm365 evm: align nand partition table to u-boot ARM: davinci: da850 evm: change audio edma event queue to EVENTQ_0 ARM: davinci: dm646x evm: wrong register used in setup_vpif_input_channel_mode ARM: davinci: dm646x does not have a DSP domain ARM: davinci: psc: fix incorrect offsets ARM: davinci: psc: fix incorrect mask ARM: mx28: LRADC macro rename arm: mx23: recognise stmp378x as mx23 ARM: mxs: fix machines' initializers order ARM: mxs/tx28: add __initconst for fec pdata ARM: S3C64XX: Staticise s3c6400_sysclass ARM: S3C64XX: Add linux/export.h to dev-spi.c ARM: S3C64XX: Remove extern from definition of framebuffer setup call MAINTAINERS: Extend Samsung patterns to cover SPI and ASoC drivers MAINTAINERS: Add linux-samsung-soc mailing list for Samsung MAINTAINERS: Consolidate Samsung MAINTAINERS ARM: CSR: PM: fix build error due to undeclared 'THIS_MODULE' ARM: CSR: fix build error due to new mdesc->dma_zone_size ...
rtvt123 · Dec 8, 2011 · 8bd1c88 · 8bd1c88
2 parents 1418a3e + 073c460
commit 8bd1c88
Show file tree

Hide file tree

Showing 29 changed files with 74 additions and 77 deletions.
diff --git a/MAINTAINERS b/MAINTAINERS
@@ -1054,35 +1054,18 @@ ARM/SAMSUNG ARM ARCHITECTURES
 M:	Ben Dooks <[email protected]>
 M:	Kukjin Kim <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
+L:	[email protected] (moderated for non-subscribers)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
 F:	arch/arm/plat-samsung/
 F:	arch/arm/plat-s3c24xx/
 F:	arch/arm/plat-s5p/
+F:	arch/arm/mach-s3c24*/
+F:	arch/arm/mach-s3c64xx/
 F:	drivers/*/*s3c2410*
 F:	drivers/*/*/*s3c2410*
-
-ARM/S3C2410 ARM ARCHITECTURE
-M:	Ben Dooks <[email protected]>
-L:	[email protected] (moderated for non-subscribers)
-W:	http://www.fluff.org/ben/linux/
-S:	Maintained
-F:	arch/arm/mach-s3c2410/
-
-ARM/S3C244x ARM ARCHITECTURE
-M:	Ben Dooks <[email protected]>
-L:	[email protected] (moderated for non-subscribers)
-W:	http://www.fluff.org/ben/linux/
-S:	Maintained
-F:	arch/arm/mach-s3c2440/
-F:	arch/arm/mach-s3c2443/
-
-ARM/S3C64xx ARM ARCHITECTURE
-M:	Ben Dooks <[email protected]>
-L:	[email protected] (moderated for non-subscribers)
-W:	http://www.fluff.org/ben/linux/
-S:	Maintained
-F:	arch/arm/mach-s3c64xx/
+F:	drivers/spi/spi-s3c*
+F:	sound/soc/samsung/*
 
 ARM/S5P EXYNOS ARM ARCHITECTURES
 M:	Kukjin Kim <[email protected]>

diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
@@ -48,12 +48,7 @@ CONFIG_MACH_SX1=y
 CONFIG_MACH_NOKIA770=y
 CONFIG_MACH_AMS_DELTA=y
 CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_OMAP_ARM_216MHZ=y
-CONFIG_OMAP_ARM_195MHZ=y
-CONFIG_OMAP_ARM_192MHZ=y
 CONFIG_OMAP_ARM_182MHZ=y
-CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_60MHZ is not set
 # CONFIG_ARM_THUMB is not set
 CONFIG_PCCARD=y
 CONFIG_OMAP_CF=y

diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {

diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
@@ -195,9 +195,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
-	CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk),
-	CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk),
-	CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
 	/* more usart lookup table for DT entries */
 	CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),

diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {

diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {

diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {

diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h
@@ -19,7 +19,7 @@
 #define BOARD_HAVE_NAND_16BIT	(1 << 31)
 static inline int board_have_nand_16bit(void)
 {
-	return system_rev & BOARD_HAVE_NAND_16BIT;
+	return (system_rev & BOARD_HAVE_NAND_16BIT) ? 1 : 0;
 }
 
 #endif /* __ARCH_SYSTEM_REV_H__ */
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
@@ -753,7 +753,7 @@ static struct snd_platform_data da850_evm_snd_data = {
 	.num_serializer	= ARRAY_SIZE(da850_iis_serializer_direction),
 	.tdm_slots	= 2,
 	.serial_dir	= da850_iis_serializer_direction,
-	.asp_chan_q	= EVENTQ_1,
+	.asp_chan_q	= EVENTQ_0,
 	.version	= MCASP_VERSION_2,
 	.txnumevt	= 1,
 	.rxnumevt	= 1,

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -107,7 +107,7 @@ static struct mtd_partition davinci_nand_partitions[] = {
 		/* UBL (a few copies) plus U-Boot */
 		.name		= "bootloader",
 		.offset		= 0,
-		.size		= 28 * NAND_BLOCK_SIZE,
+		.size		= 30 * NAND_BLOCK_SIZE,
 		.mask_flags	= MTD_WRITEABLE, /* force read-only */
 	}, {
 		/* U-Boot environment */

diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -564,23 +564,23 @@ static int setup_vpif_input_channel_mode(int mux_mode)
 	int val;
 	u32 value;
 
-	if (!vpif_vsclkdis_reg || !cpld_client)
+	if (!vpif_vidclkctl_reg || !cpld_client)
 		return -ENXIO;
 
 	val = i2c_smbus_read_byte(cpld_client);
 	if (val < 0)
 		return val;
 
 	spin_lock_irqsave(&vpif_reg_lock, flags);
-	value = __raw_readl(vpif_vsclkdis_reg);
+	value = __raw_readl(vpif_vidclkctl_reg);
 	if (mux_mode) {
 		val &= VPIF_INPUT_TWO_CHANNEL;
 		value |= VIDCH1CLK;
 	} else {
 		val |= VPIF_INPUT_ONE_CHANNEL;
 		value &= ~VIDCH1CLK;
 	}
-	__raw_writel(value, vpif_vsclkdis_reg);
+	__raw_writel(value, vpif_vidclkctl_reg);
 	spin_unlock_irqrestore(&vpif_reg_lock, flags);
 
 	err = i2c_smbus_write_byte(cpld_client, val);

diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
@@ -161,7 +161,6 @@ static struct clk dsp_clk = {
 	.name = "dsp",
 	.parent = &pll1_sysclk1,
 	.lpsc = DM646X_LPSC_C64X_CPU,
-	.flags = PSC_DSP,
 	.usecount = 1,			/* REVISIT how to disable? */
 };
 

diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
@@ -233,7 +233,7 @@
 #define PTCMD		0x120
 #define PTSTAT		0x128
 #define PDSTAT		0x200
-#define PDCTL1		0x304
+#define PDCTL		0x300
 #define MDSTAT		0x800
 #define MDCTL		0xA00
 
@@ -244,7 +244,10 @@
 #define PSC_STATE_ENABLE	3
 
 #define MDSTAT_STATE_MASK	0x3f
+#define PDSTAT_STATE_MASK	0x1f
 #define MDCTL_FORCE		BIT(31)
+#define PDCTL_NEXT		BIT(1)
+#define PDCTL_EPCGOOD		BIT(8)
 
 #ifndef __ASSEMBLER__
 

diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
@@ -52,7 +52,7 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
 void davinci_psc_config(unsigned int domain, unsigned int ctlr,
 		unsigned int id, bool enable, u32 flags)
 {
-	u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
+	u32 epcpr, ptcmd, ptstat, pdstat, pdctl, mdstat, mdctl;
 	void __iomem *psc_base;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	u32 next_state = PSC_STATE_ENABLE;
@@ -79,11 +79,11 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr,
 		mdctl |= MDCTL_FORCE;
 	__raw_writel(mdctl, psc_base + MDCTL + 4 * id);
 
-	pdstat = __raw_readl(psc_base + PDSTAT);
-	if ((pdstat & 0x00000001) == 0) {
-		pdctl1 = __raw_readl(psc_base + PDCTL1);
-		pdctl1 |= 0x1;
-		__raw_writel(pdctl1, psc_base + PDCTL1);
+	pdstat = __raw_readl(psc_base + PDSTAT + 4 * domain);
+	if ((pdstat & PDSTAT_STATE_MASK) == 0) {
+		pdctl = __raw_readl(psc_base + PDCTL + 4 * domain);
+		pdctl |= PDCTL_NEXT;
+		__raw_writel(pdctl, psc_base + PDCTL + 4 * domain);
 
 		ptcmd = 1 << domain;
 		__raw_writel(ptcmd, psc_base + PTCMD);
@@ -92,9 +92,9 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr,
 			epcpr = __raw_readl(psc_base + EPCPR);
 		} while ((((epcpr >> domain) & 1) == 0));
 
-		pdctl1 = __raw_readl(psc_base + PDCTL1);
-		pdctl1 |= 0x100;
-		__raw_writel(pdctl1, psc_base + PDCTL1);
+		pdctl = __raw_readl(psc_base + PDCTL + 4 * domain);
+		pdctl |= PDCTL_EPCGOOD;
+		__raw_writel(pdctl, psc_base + PDCTL + 4 * domain);
 	} else {
 		ptcmd = 1 << domain;
 		__raw_writel(ptcmd, psc_base + PTCMD);

diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
@@ -37,14 +37,15 @@ static void __init imx6q_map_io(void)
 	imx6q_clock_map_io();
 }
 
-static void __init imx6q_gpio_add_irq_domain(struct device_node *np,
+static int __init imx6q_gpio_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
-	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
-				   32 * 7; /* imx6q gets 7 gpio ports */
+	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
 
+	gpio_irq_base -= 32;
 	irq_domain_add_simple(np, gpio_irq_base);
-	gpio_irq_base += 32;
+
+	return 0;
 }
 
 static const struct of_device_id imx6q_irq_match[] __initconst = {

diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c
@@ -44,20 +44,22 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
 	{ /* sentinel */ }
 };
 
-static void __init imx51_tzic_add_irq_domain(struct device_node *np,
+static int __init imx51_tzic_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
 	irq_domain_add_simple(np, 0);
+	return 0;
 }
 
-static void __init imx51_gpio_add_irq_domain(struct device_node *np,
+static int __init imx51_gpio_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
-	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
-				   32 * 4; /* imx51 gets 4 gpio ports */
+	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
 
+	gpio_irq_base -= 32;
 	irq_domain_add_simple(np, gpio_irq_base);
-	gpio_irq_base += 32;
+
+	return 0;
 }
 
 static const struct of_device_id imx51_irq_match[] __initconst = {

diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c
@@ -48,20 +48,22 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
 	{ /* sentinel */ }
 };
 
-static void __init imx53_tzic_add_irq_domain(struct device_node *np,
+static int __init imx53_tzic_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
 	irq_domain_add_simple(np, 0);
+	return 0;
 }
 
-static void __init imx53_gpio_add_irq_domain(struct device_node *np,
+static int __init imx53_gpio_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
-	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
-				   32 * 7; /* imx53 gets 7 gpio ports */
+	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
 
+	gpio_irq_base -= 32;
 	irq_domain_add_simple(np, gpio_irq_base);
-	gpio_irq_base += 32;
+
+	return 0;
 }
 
 static const struct of_device_id imx53_irq_match[] __initconst = {

diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h
@@ -104,8 +104,8 @@
 #define MX28_INT_CAN1			9
 #define MX28_INT_LRADC_TOUCH		10
 #define MX28_INT_HSADC			13
-#define MX28_INT_IRADC_THRESH0		14
-#define MX28_INT_IRADC_THRESH1		15
+#define MX28_INT_LRADC_THRESH0		14
+#define MX28_INT_LRADC_THRESH1		15
 #define MX28_INT_LRADC_CH0		16
 #define MX28_INT_LRADC_CH1		17
 #define MX28_INT_LRADC_CH2		18

diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h
@@ -30,6 +30,7 @@
  */
 #define cpu_is_mx23()		(					\
 		machine_is_mx23evk() ||					\
+		machine_is_stmp378x() ||				\
 		0)
 #define cpu_is_mx28()		(					\
 		machine_is_mx28evk() ||					\

diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c
@@ -361,6 +361,6 @@ static struct sys_timer m28evk_timer = {
 MACHINE_START(M28EVK, "DENX M28 EVK")
 	.map_io		= mx28_map_io,
 	.init_irq	= mx28_init_irq,
-	.init_machine	= m28evk_init,
 	.timer		= &m28evk_timer,
+	.init_machine	= m28evk_init,
 MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c
@@ -115,6 +115,6 @@ static struct sys_timer stmp378x_dvb_timer = {
 MACHINE_START(STMP378X, "STMP378X")
 	.map_io		= mx23_map_io,
 	.init_irq	= mx23_init_irq,
-	.init_machine	= stmp378x_dvb_init,
 	.timer		= &stmp378x_dvb_timer,
+	.init_machine	= stmp378x_dvb_init,
 MACHINE_END
diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c
@@ -66,11 +66,11 @@ static const iomux_cfg_t tx28_fec1_pads[] __initconst = {
 	MX28_PAD_ENET0_CRS__ENET1_RX_EN,
 };
 
-static struct fec_platform_data tx28_fec0_data = {
+static const struct fec_platform_data tx28_fec0_data __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 
-static struct fec_platform_data tx28_fec1_data = {
+static const struct fec_platform_data tx28_fec1_data __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 

diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
@@ -16,6 +16,8 @@
 
 #include <linux/kernel.h>
 #include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
 #include <linux/io.h>
 
 #include <asm/mach-types.h>  /* for machine_is_* */
@@ -927,16 +929,22 @@ int __init omap1_clk_init(void)
 
 void __init omap1_clk_late_init(void)
 {
-	if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE)
+	unsigned long rate = ck_dpll1.rate;
+
+	if (rate >= OMAP1_DPLL1_SANE_VALUE)
 		return;
 
+	/* System booting at unusable rate, force reprogramming of DPLL1 */
+	ck_dpll1_p->rate = 0;
+
 	/* Find the highest supported frequency and enable it */
 	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
 		pr_err("System frequencies not set, using default. Check your config.\n");
 		omap_writew(0x2290, DPLL_CTL);
-		omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
+		omap_writew(cpu_is_omap7xx() ? 0x2005 : 0x0005, ARM_CKCTL);
 		ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE;
 	}
 	propagate_rate(&ck_dpll1);
 	omap1_show_rates();
+	loops_per_jiffy = cpufreq_scale(loops_per_jiffy, rate, ck_dpll1.rate);
 }
diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c
@@ -9,6 +9,7 @@
 #include <linux/kernel.h>
 #include <linux/suspend.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>

diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c
@@ -8,6 +8,7 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <asm/sizes.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <linux/of.h>