Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/torvalds/linux into fixes

The merge of the 'clk-for-linus' branch caused an automated
merge failure. Pull that in here so we can fix the problem.

Signed-off-by: Arnd Bergmann <[email protected]>

Documentation/ABI/stable/vdso

@@ -24,4 +24,4 @@ though.
 
 (As of this writing, this ABI documentation as been confirmed for x86_64.
  The maintainers of the other vDSO-using architectures should confirm
- that it is correct for their architecture.)
+ that it is correct for their architecture.)

Documentation/ABI/testing/sysfs-block-zram

@@ -96,4 +96,4 @@ Description:
 		overhead, allocated for this disk. So, allocator space
 		efficiency can be calculated using compr_data_size and this
 		statistic.
-		Unit: bytes
+		Unit: bytes

Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg

@@ -40,4 +40,4 @@ Description:	Controls the decimal places on the device.
 		the value of 10 ** n. Assume this field has
 		the value k and has 1 or more decimal places set,
 		to set the mth place (where m is not already set),
-		change this fields value to k + 10 ** m.
+		change this fields value to k + 10 ** m.

Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870

@@ -53,4 +53,4 @@ Description:
 		Documentation/ABI/stable/sysfs-class-backlight.
 		It can be enabled by writing the value stored in
 		/sys/class/backlight/<backlight>/max_brightness to
-		/sys/class/backlight/<backlight>/brightness.
+		/sys/class/backlight/<backlight>/brightness.

Documentation/ABI/testing/sysfs-devices-system-xen_cpu

@@ -0,0 +1,20 @@
+What:		/sys/devices/system/xen_cpu/
+Date:		May 2012
+Contact:	Liu, Jinsong <[email protected]>
+Description:
+		A collection of global/individual Xen physical cpu attributes
+
+		Individual physical cpu attributes are contained in
+		subdirectories named by the Xen's logical cpu number, e.g.:
+		/sys/devices/system/xen_cpu/xen_cpu#/
+
+
+What:		/sys/devices/system/xen_cpu/xen_cpu#/online
+Date:		May 2012
+Contact:	Liu, Jinsong <[email protected]>
+Description:
+		Interface to online/offline Xen physical cpus
+
+		When running under Xen platform, it provide user interface
+		to online/offline physical cpus, except cpu0 due to several
+		logic restrictions and assumptions.

Documentation/ABI/testing/sysfs-driver-hid-lenovo-tpkbd

@@ -0,0 +1,38 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/press_to_select
+Date:		July 2011
+Contact:	[email protected]
+Description:	This controls if mouse clicks should be generated if the trackpoint is quickly pressed. How fast this press has to be
+		is being controlled by press_speed.
+		Values are 0 or 1.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/dragging
+Date:		July 2011
+Contact:	[email protected]
+Description:	If this setting is enabled, it is possible to do dragging by pressing the trackpoint. This requires press_to_select to be enabled.
+		Values are 0 or 1.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/release_to_select
+Date:		July 2011
+Contact:	[email protected]
+Description:	For details regarding this setting please refer to http://www.pc.ibm.com/ww/healthycomputing/trkpntb.html
+		Values are 0 or 1.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/select_right
+Date:		July 2011
+Contact:	[email protected]
+Description:	This setting controls if the mouse click events generated by pressing the trackpoint (if press_to_select is enabled) generate
+		a left or right mouse button click.
+		Values are 0 or 1.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/sensitivity
+Date:		July 2011
+Contact:	[email protected]
+Description:	This file contains the trackpoint sensitivity.
+		Values are decimal integers from 1 (lowest sensitivity) to 255 (highest sensitivity).
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/press_speed
+Date:		July 2011
+Contact:	[email protected]
+Description:	This setting controls how fast the trackpoint needs to be pressed to generate a mouse click if press_to_select is enabled.
+		Values are decimal integers from 1 (slowest) to 255 (fastest).
+

Documentation/ABI/testing/sysfs-driver-hid-roccat-savu

@@ -0,0 +1,77 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/buttons
+Date:		Mai 2012
+Contact:	Stefan Achatz <[email protected]>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split into general settings and
+		button settings. buttons holds informations about button layout.
+		When written, this file lets one write the respective profile
+		buttons to the mouse. The data has to be 47 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/control
+Date:		Mai 2012
+Contact:	Stefan Achatz <[email protected]>
+Description:	When written, this file lets one select which data from which
+		profile will be	read next. The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/general
+Date:		Mai 2012
+Contact:	Stefan Achatz <[email protected]>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split into general settings and
+		button settings. profile holds informations like resolution, sensitivity
+		and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 43 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/info
+Date:		Mai 2012
+Contact:	Stefan Achatz <[email protected]>
+Description:	When read, this file returns general data like firmware version.
+		The data is 8 bytes long.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/macro
+Date:		Mai 2012
+Contact:	Stefan Achatz <[email protected]>
+Description:	When written, this file lets one store macros with max 500
+		keystrokes for a specific button for a specific profile.
+		Button and profile numbers are included in written data.
+		The data has to be 2083 bytes long.
+		Before reading this file, control has to be written to select
+		which profile and key to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/profile
+Date:		Mai 2012
+Contact:	Stefan Achatz <[email protected]>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. profile holds number of actual profile.
+		This value is persistent, so its value determines the profile
+		that's active when the mouse is powered on next time.
+		When written, the mouse activates the set profile immediately.
+		The data has to be 3 bytes long.
+		The mouse will reject invalid data.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/sensor
+Date:		July 2012
+Contact:	Stefan Achatz <[email protected]>
+Description:	The mouse has a Avago ADNS-3090 sensor.
+		This file allows reading and writing of the mouse sensors registers.
+		The data has to be 4 bytes long.
+Users:		http://roccat.sourceforge.net
+

Documentation/ABI/testing/sysfs-kernel-iommu_groups

@@ -0,0 +1,14 @@
+What:		/sys/kernel/iommu_groups/
+Date:		May 2012
+KernelVersion:	v3.5
+Contact:	Alex Williamson <[email protected]>
+Description:	/sys/kernel/iommu_groups/ contains a number of sub-
+		directories, each representing an IOMMU group.  The
+		name of the sub-directory matches the iommu_group_id()
+		for the group, which is an integer value.  Within each
+		subdirectory is another directory named "devices" with
+		links to the sysfs devices contained in this group.
+		The group directory also optionally contains a "name"
+		file if the IOMMU driver has chosen to register a more
+		common name for the group.
+Users:

Documentation/DocBook/80211.tmpl

@@ -404,7 +404,6 @@
 !Finclude/net/mac80211.h ieee80211_get_tkip_p1k
 !Finclude/net/mac80211.h ieee80211_get_tkip_p1k_iv
 !Finclude/net/mac80211.h ieee80211_get_tkip_p2k
-!Finclude/net/mac80211.h ieee80211_key_removed
       </chapter>
 
       <chapter id="powersave">

Documentation/ManagementStyle

@@ -178,7 +178,7 @@ sadly that you are one too, and that while we can all bask in the secure
 knowledge that we're better than the average person (let's face it,
 nobody ever believes that they're average or below-average), we should
 also admit that we're not the sharpest knife around, and there will be
-other people that are less of an idiot that you are. 
+other people that are less of an idiot than you are. 
 
 Some people react badly to smart people.  Others take advantage of them. 
 

Documentation/arm/Samsung-S3C24XX/H1940.txt

@@ -37,4 +37,4 @@ Maintainers
   Thanks to the many others who have also provided support.
 
 
-(c) 2005 Ben Dooks
+(c) 2005 Ben Dooks

Documentation/arm/Samsung-S3C24XX/SMDK2440.txt

@@ -53,4 +53,4 @@ Maintainers
   and to Simtec Electronics for allowing me time to work on this.
 
 
-(c) 2004 Ben Dooks
+(c) 2004 Ben Dooks

Documentation/connector/cn_test.c

@@ -69,9 +69,13 @@ static int cn_test_want_notify(void)
 		return -ENOMEM;
 	}
 
-	nlh = NLMSG_PUT(skb, 0, 0x123, NLMSG_DONE, size - sizeof(*nlh));
+	nlh = nlmsg_put(skb, 0, 0x123, NLMSG_DONE, size - sizeof(*nlh), 0);
+	if (!nlh) {
+		kfree_skb(skb);
+		return -EMSGSIZE;
+	}
 
-	msg = (struct cn_msg *)NLMSG_DATA(nlh);
+	msg = nlmsg_data(nlh);
 
 	memset(msg, 0, size0);
 
@@ -117,11 +121,6 @@ static int cn_test_want_notify(void)
 	pr_info("request was sent: group=0x%x\n", ctl->group);
 
 	return 0;
-
-nlmsg_failure:
-	pr_err("failed to send %u.%u\n", msg->seq, msg->ack);
-	kfree_skb(skb);
-	return -EINVAL;
 }
 #endif
 

Documentation/devices.txt

@@ -2416,6 +2416,8 @@ Your cooperation is appreciated.
 		  1 = /dev/raw/raw1	First raw I/O device
 		  2 = /dev/raw/raw2	Second raw I/O device
 		    ...
+                 max minor number of raw device is set by kernel config
+                 MAX_RAW_DEVS or raw module parameter 'max_raw_devs'
 
 163 char
 

Documentation/devicetree/bindings/arm/primecell.txt

@@ -13,11 +13,17 @@ Required properties:
 Optional properties:
 
 - arm,primecell-periphid : Value to override the h/w value with
+- clocks : From common clock binding. First clock is phandle to clock for apb
+	pclk. Additional clocks are optional and specific to those peripherals.
+- clock-names : From common clock binding. Shall be "apb_pclk" for first clock.
 
 Example:
 
 serial@fff36000 {
 	compatible = "arm,pl011", "arm,primecell";
 	arm,primecell-periphid = <0x00341011>;
+	clocks = <&pclk>;
+	clock-names = "apb_pclk";
+
 };
 

Documentation/devicetree/bindings/clock/calxeda.txt

@@ -0,0 +1,17 @@
+Device Tree Clock bindings for Calxeda highbank platform
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"calxeda,hb-pll-clock" - for a PLL clock
+	"calxeda,hb-a9periph-clock" - The A9 peripheral clock divided from the
+		A9 clock.
+	"calxeda,hb-a9bus-clock" - The A9 bus clock divided from the A9 clock.
+	"calxeda,hb-emmc-clock" - Divided clock for MMC/SD controller.
+- reg : shall be the control register offset from SYSREGs base for the clock.
+- clocks : shall be the input parent clock phandle for the clock. This is
+	either an oscillator or a pll output.
+- #clock-cells : from common clock binding; shall be set to 0.