Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/l…

…inux/kernel/git/tip/linux-2.6-tip

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (29 commits)
  sched: Export account_system_vtime()
  sched: Call tick_check_idle before __irq_enter
  sched: Remove irq time from available CPU power
  sched: Do not account irq time to current task
  x86: Add IRQ_TIME_ACCOUNTING
  sched: Add IRQ_TIME_ACCOUNTING, finer accounting of irq time
  sched: Add a PF flag for ksoftirqd identification
  sched: Consolidate account_system_vtime extern declaration
  sched: Fix softirq time accounting
  sched: Drop group_capacity to 1 only if local group has extra capacity
  sched: Force balancing on newidle balance if local group has capacity
  sched: Set group_imb only a task can be pulled from the busiest cpu
  sched: Do not consider SCHED_IDLE tasks to be cache hot
  sched: Drop all load weight manipulation for RT tasks
  sched: Create special class for stop/migrate work
  sched: Unindent labels
  sched: Comment updates: fix default latency and granularity numbers
  tracing/sched: Add sched_pi_setprio tracepoint
  sched: Give CPU bound RT tasks preference
  sched: Try not to migrate higher priority RT tasks
  ...

Documentation/cputopology.txt

@@ -14,25 +14,39 @@ to /proc/cpuinfo.
 	identifier (rather than the kernel's).  The actual value is
 	architecture and platform dependent.
 
-3) /sys/devices/system/cpu/cpuX/topology/thread_siblings:
+3) /sys/devices/system/cpu/cpuX/topology/book_id:
+
+	the book ID of cpuX. Typically it is the hardware platform's
+	identifier (rather than the kernel's).	The actual value is
+	architecture and platform dependent.
+
+4) /sys/devices/system/cpu/cpuX/topology/thread_siblings:
 
 	internel kernel map of cpuX's hardware threads within the same
 	core as cpuX
 
-4) /sys/devices/system/cpu/cpuX/topology/core_siblings:
+5) /sys/devices/system/cpu/cpuX/topology/core_siblings:
 
 	internal kernel map of cpuX's hardware threads within the same
 	physical_package_id.
 
+6) /sys/devices/system/cpu/cpuX/topology/book_siblings:
+
+	internal kernel map of cpuX's hardware threads within the same
+	book_id.
+
 To implement it in an architecture-neutral way, a new source file,
-drivers/base/topology.c, is to export the 4 attributes.
+drivers/base/topology.c, is to export the 4 or 6 attributes. The two book
+related sysfs files will only be created if CONFIG_SCHED_BOOK is selected.
 
 For an architecture to support this feature, it must define some of
 these macros in include/asm-XXX/topology.h:
 #define topology_physical_package_id(cpu)
 #define topology_core_id(cpu)
+#define topology_book_id(cpu)
 #define topology_thread_cpumask(cpu)
 #define topology_core_cpumask(cpu)
+#define topology_book_cpumask(cpu)
 
 The type of **_id is int.
 The type of siblings is (const) struct cpumask *.
@@ -45,6 +59,9 @@ not defined by include/asm-XXX/topology.h:
 3) thread_siblings: just the given CPU
 4) core_siblings: just the given CPU
 
+For architectures that don't support books (CONFIG_SCHED_BOOK) there are no
+default definitions for topology_book_id() and topology_book_cpumask().
+
 Additionally, CPU topology information is provided under
 /sys/devices/system/cpu and includes these files.  The internal
 source for the output is in brackets ("[]").

Documentation/kernel-parameters.txt

@@ -2435,6 +2435,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			disables clocksource verification at runtime.
 			Used to enable high-resolution timer mode on older
 			hardware, and in virtualized environment.
+			[x86] noirqtime: Do not use TSC to do irq accounting.
+			Used to run time disable IRQ_TIME_ACCOUNTING on any
+			platforms where RDTSC is slow and this accounting
+			can add overhead.
 
 	turbografx.map[2|3]=	[HW,JOY]
 			TurboGraFX parallel port interface

arch/ia64/include/asm/system.h

@@ -272,10 +272,6 @@ void cpu_idle_wait(void);
 
 void default_idle(void);
 
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-extern void account_system_vtime(struct task_struct *);
-#endif
-
 #endif /* __KERNEL__ */
 
 #endif /* __ASSEMBLY__ */

arch/powerpc/include/asm/system.h

@@ -542,10 +542,6 @@ extern void reloc_got2(unsigned long);
 
 #define PTRRELOC(x)	((typeof(x)) add_reloc_offset((unsigned long)(x)))
 
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-extern void account_system_vtime(struct task_struct *);
-#endif
-
 extern struct dentry *powerpc_debugfs_root;
 
 #endif /* __KERNEL__ */

arch/s390/Kconfig

@@ -199,6 +199,13 @@ config HOTPLUG_CPU
 	  can be controlled through /sys/devices/system/cpu/cpu#.
 	  Say N if you want to disable CPU hotplug.
 
+config SCHED_BOOK
+	bool "Book scheduler support"
+	depends on SMP
+	help
+	  Book scheduler support improves the CPU scheduler's decision making
+	  when dealing with machines that have several books.
+
 config MATHEMU
 	bool "IEEE FPU emulation"
 	depends on MARCH_G5

arch/s390/include/asm/system.h

@@ -97,7 +97,6 @@ static inline void restore_access_regs(unsigned int *acrs)
 
 extern void account_vtime(struct task_struct *, struct task_struct *);
 extern void account_tick_vtime(struct task_struct *);
-extern void account_system_vtime(struct task_struct *);
 
 #ifdef CONFIG_PFAULT
 extern void pfault_irq_init(void);

arch/s390/include/asm/topology.h

@@ -3,15 +3,32 @@
 
 #include <linux/cpumask.h>
 
-#define mc_capable()	(1)
-
-const struct cpumask *cpu_coregroup_mask(unsigned int cpu);
-
 extern unsigned char cpu_core_id[NR_CPUS];
 extern cpumask_t cpu_core_map[NR_CPUS];
 
+static inline const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
+{
+	return &cpu_core_map[cpu];
+}
+
 #define topology_core_id(cpu)		(cpu_core_id[cpu])
 #define topology_core_cpumask(cpu)	(&cpu_core_map[cpu])
+#define mc_capable()			(1)
+
+#ifdef CONFIG_SCHED_BOOK
+
+extern unsigned char cpu_book_id[NR_CPUS];
+extern cpumask_t cpu_book_map[NR_CPUS];
+
+static inline const struct cpumask *cpu_book_mask(unsigned int cpu)
+{
+	return &cpu_book_map[cpu];
+}
+
+#define topology_book_id(cpu)		(cpu_book_id[cpu])
+#define topology_book_cpumask(cpu)	(&cpu_book_map[cpu])
+
+#endif /* CONFIG_SCHED_BOOK */
 
 int topology_set_cpu_management(int fc);
 void topology_schedule_update(void);
@@ -30,6 +47,8 @@ static inline void s390_init_cpu_topology(void)
 };
 #endif
 
+#define SD_BOOK_INIT	SD_CPU_INIT
+
 #include <asm-generic/topology.h>
 
 #endif /* _ASM_S390_TOPOLOGY_H */