Skip to content

Commit

Permalink
Merge branch 'introduce-hsr-offload-support-for-icssg'
Browse files Browse the repository at this point in the history
MD Danish Anwar says:

====================
Introduce HSR offload support for ICSSG

This series introduces HSR offload support for ICSSG driver. To support HSR
offload to hardware, ICSSG HSR firmware is used.

This series introduces,
1. HSR frame offload support for ICSSG driver.
2. HSR Tx Packet duplication offload
3. HSR Tx Tag and Rx Tag offload
4. Multicast filtering support in HSR offload mode.
5. Dependencies related to IEP.

HSR Test Setup:
--------------

     ___________           ___________           ___________
    |           | Link AB |           | Link BC |           |
  __|   AM64*   |_________|   AM64    |_________|   AM64*   |___
 |  | Station A |         | Station B |         | Station C |   |
 |  |___________|         |___________|         |___________|   |
 |                                                              |
 |______________________________________________________________|
                            Link CA
 *Could be any device that supports two ethernet interfaces.

Steps to switch to HSR frame forward offload mode:
-------------------------------------------------
Example assuming eth1, eth2 ports of ICSSG1 on AM64-EVM

  1) Enable HSR offload for both interfaces
      ethtool -K eth1 hsr-fwd-offload on
      ethtool -K eth1 hsr-dup-offload on
      ethtool -K eth1 hsr-tag-ins-offload on
      ethtool -K eth1 hsr-tag-rm-offload on

      ethtool -K eth2 hsr-fwd-offload on
      ethtool -K eth2 hsr-dup-offload on
      ethtool -K eth2 hsr-tag-ins-offload on
      ethtool -K eth2 hsr-tag-rm-offload on

  2) Create HSR interface and add slave interfaces to it
      ip link add name hsr0 type hsr slave1 eth1 slave2 eth2 \
    supervision 45 version 1

  3) Add IP address to the HSR interface
      ip addr add <IP_ADDR>/24 dev hsr0

  4) Bring up the HSR interface
      ip link set hsr0 up

Switching back to previous mode:
--------------------------------
  1) Delete HSR interface
      ip link delete hsr0

  2) Disable HSR port-to-port offloading mode, packet duplication
      ethtool -K eth1 hsr-fwd-offload off
      ethtool -K eth1 hsr-dup-offload off
      ethtool -K eth1 hsr-tag-ins-offload off
      ethtool -K eth1 hsr-tag-rm-offload off

      ethtool -K eth2 hsr-fwd-offload off
      ethtool -K eth2 hsr-dup-offload off
      ethtool -K eth2 hsr-tag-ins-offload off
      ethtool -K eth2 hsr-tag-rm-offload off

Testing the port-to-port frame forward offload feature:
-----------------------------------------------------
  1) Connect the LAN cables as shown in the test setup.
  2) Configure Station A and Station C in HSR non-offload mode.
  3) Configure Station B is HSR offload mode.
  4) Since HSR is a redundancy protocol, disconnect cable "Link CA",
     to ensure frames from Station A reach Station C only through
     Station B.
  5) Run iperf3 Server on Station C and client on station A.
  7) Check the CPU usage on Station B.

CPU usage report on Station B using mpstat when running UDP iperf3:
-------------------------------------------------------------------

  1) Non-Offload case
  -------------------
  CPU  %usr  %nice  %sys %iowait  %irq  %soft  %steal  %guest   %idle
  all  0.00   0.00  0.50    0.00  3.52  29.15    0.00    0.00   66.83
    0  0.00   0.00  0.00    0.00  7.00  58.00    0.00    0.00   35.00
    1  0.00   0.00  0.99    0.00  0.99   0.00    0.00    0.00   98.02

  2) Offload case
  ---------------
  CPU  %usr  %nice  %sys %iowait  %irq  %soft  %steal  %guest   %idle
  all  0.00   0.00  0.00    0.00  0.50   0.00    0.00    0.00   99.50
    0  0.00   0.00  0.99    0.00  0.00   0.00    0.00    0.00   99.01
    1  0.00   0.00  0.00    0.00  0.00   0.00    0.00    0.00  100.00

Note:
1) At the very least, hsr-fwd-offload must be enabled.
   Without offloading the port-to-port offload, other
   HSR offloads cannot be enabled.

2) hsr-tag-ins-offload and hsr-dup-offload are tightly coupled in
   the firmware implementation. They both need to be enabled / disabled
   together.

v1: https://lore.kernel.org/[email protected]/
v2: https://lore.kernel.org/[email protected]
v3: https://lore.kernel.org/[email protected]/
v4: https://lore.kernel.org/[email protected]/
v5: https://lore.kernel.org/[email protected]/

[0] https://lore.kernel.org/[email protected]/
[1] https://lore.kernel.org/[email protected]/
[2] https://lore.kernel.org/[email protected]/
[3] https://lore.kernel.org/[email protected]/
[4] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=e846be0fba85
====================

Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
  • Loading branch information
kuba-moo committed Sep 14, 2024
2 parents 34c44eb + 1d6ae96 commit 3254ce8
Show file tree
Hide file tree
Showing 8 changed files with 290 additions and 92 deletions.
72 changes: 0 additions & 72 deletions drivers/net/ethernet/ti/icssg/icss_iep.c
Original file line number Diff line number Diff line change
Expand Up @@ -53,78 +53,6 @@
#define IEP_CAP_CFG_CAPNR_1ST_EVENT_EN(n) BIT(LATCH_INDEX(n))
#define IEP_CAP_CFG_CAP_ASYNC_EN(n) BIT(LATCH_INDEX(n) + 10)

enum {
ICSS_IEP_GLOBAL_CFG_REG,
ICSS_IEP_GLOBAL_STATUS_REG,
ICSS_IEP_COMPEN_REG,
ICSS_IEP_SLOW_COMPEN_REG,
ICSS_IEP_COUNT_REG0,
ICSS_IEP_COUNT_REG1,
ICSS_IEP_CAPTURE_CFG_REG,
ICSS_IEP_CAPTURE_STAT_REG,

ICSS_IEP_CAP6_RISE_REG0,
ICSS_IEP_CAP6_RISE_REG1,

ICSS_IEP_CAP7_RISE_REG0,
ICSS_IEP_CAP7_RISE_REG1,

ICSS_IEP_CMP_CFG_REG,
ICSS_IEP_CMP_STAT_REG,
ICSS_IEP_CMP0_REG0,
ICSS_IEP_CMP0_REG1,
ICSS_IEP_CMP1_REG0,
ICSS_IEP_CMP1_REG1,

ICSS_IEP_CMP8_REG0,
ICSS_IEP_CMP8_REG1,
ICSS_IEP_SYNC_CTRL_REG,
ICSS_IEP_SYNC0_STAT_REG,
ICSS_IEP_SYNC1_STAT_REG,
ICSS_IEP_SYNC_PWIDTH_REG,
ICSS_IEP_SYNC0_PERIOD_REG,
ICSS_IEP_SYNC1_DELAY_REG,
ICSS_IEP_SYNC_START_REG,
ICSS_IEP_MAX_REGS,
};

/**
* struct icss_iep_plat_data - Plat data to handle SoC variants
* @config: Regmap configuration data
* @reg_offs: register offsets to capture offset differences across SoCs
* @flags: Flags to represent IEP properties
*/
struct icss_iep_plat_data {
const struct regmap_config *config;
u32 reg_offs[ICSS_IEP_MAX_REGS];
u32 flags;
};

struct icss_iep {
struct device *dev;
void __iomem *base;
const struct icss_iep_plat_data *plat_data;
struct regmap *map;
struct device_node *client_np;
unsigned long refclk_freq;
int clk_tick_time; /* one refclk tick time in ns */
struct ptp_clock_info ptp_info;
struct ptp_clock *ptp_clock;
struct mutex ptp_clk_mutex; /* PHC access serializer */
u32 def_inc;
s16 slow_cmp_inc;
u32 slow_cmp_count;
const struct icss_iep_clockops *ops;
void *clockops_data;
u32 cycle_time_ns;
u32 perout_enabled;
bool pps_enabled;
int cap_cmp_irq;
u64 period;
u32 latch_enable;
struct work_struct work;
};

/**
* icss_iep_get_count_hi() - Get the upper 32 bit IEP counter
* @iep: Pointer to structure representing IEP.
Expand Down
73 changes: 72 additions & 1 deletion drivers/net/ethernet/ti/icssg/icss_iep.h
Original file line number Diff line number Diff line change
Expand Up @@ -12,7 +12,78 @@
#include <linux/ptp_clock_kernel.h>
#include <linux/regmap.h>

struct icss_iep;
enum {
ICSS_IEP_GLOBAL_CFG_REG,
ICSS_IEP_GLOBAL_STATUS_REG,
ICSS_IEP_COMPEN_REG,
ICSS_IEP_SLOW_COMPEN_REG,
ICSS_IEP_COUNT_REG0,
ICSS_IEP_COUNT_REG1,
ICSS_IEP_CAPTURE_CFG_REG,
ICSS_IEP_CAPTURE_STAT_REG,

ICSS_IEP_CAP6_RISE_REG0,
ICSS_IEP_CAP6_RISE_REG1,

ICSS_IEP_CAP7_RISE_REG0,
ICSS_IEP_CAP7_RISE_REG1,

ICSS_IEP_CMP_CFG_REG,
ICSS_IEP_CMP_STAT_REG,
ICSS_IEP_CMP0_REG0,
ICSS_IEP_CMP0_REG1,
ICSS_IEP_CMP1_REG0,
ICSS_IEP_CMP1_REG1,

ICSS_IEP_CMP8_REG0,
ICSS_IEP_CMP8_REG1,
ICSS_IEP_SYNC_CTRL_REG,
ICSS_IEP_SYNC0_STAT_REG,
ICSS_IEP_SYNC1_STAT_REG,
ICSS_IEP_SYNC_PWIDTH_REG,
ICSS_IEP_SYNC0_PERIOD_REG,
ICSS_IEP_SYNC1_DELAY_REG,
ICSS_IEP_SYNC_START_REG,
ICSS_IEP_MAX_REGS,
};

/**
* struct icss_iep_plat_data - Plat data to handle SoC variants
* @config: Regmap configuration data
* @reg_offs: register offsets to capture offset differences across SoCs
* @flags: Flags to represent IEP properties
*/
struct icss_iep_plat_data {
const struct regmap_config *config;
u32 reg_offs[ICSS_IEP_MAX_REGS];
u32 flags;
};

struct icss_iep {
struct device *dev;
void __iomem *base;
const struct icss_iep_plat_data *plat_data;
struct regmap *map;
struct device_node *client_np;
unsigned long refclk_freq;
int clk_tick_time; /* one refclk tick time in ns */
struct ptp_clock_info ptp_info;
struct ptp_clock *ptp_clock;
struct mutex ptp_clk_mutex; /* PHC access serializer */
u32 def_inc;
s16 slow_cmp_inc;
u32 slow_cmp_count;
const struct icss_iep_clockops *ops;
void *clockops_data;
u32 cycle_time_ns;
u32 perout_enabled;
bool pps_enabled;
int cap_cmp_irq;
u64 period;
u32 latch_enable;
struct work_struct work;
};

extern const struct icss_iep_clockops prueth_iep_clockops;

/* Firmware specific clock operations */
Expand Down
1 change: 1 addition & 0 deletions drivers/net/ethernet/ti/icssg/icssg_classifier.c
Original file line number Diff line number Diff line change
Expand Up @@ -290,6 +290,7 @@ void icssg_class_set_host_mac_addr(struct regmap *miig_rt, const u8 *mac)
mac[2] << 16 | mac[3] << 24));
regmap_write(miig_rt, MAC_INTERFACE_1, (u32)(mac[4] | mac[5] << 8));
}
EXPORT_SYMBOL_GPL(icssg_class_set_host_mac_addr);

void icssg_class_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac)
{
Expand Down
18 changes: 15 additions & 3 deletions drivers/net/ethernet/ti/icssg/icssg_common.c
Original file line number Diff line number Diff line change
Expand Up @@ -660,14 +660,15 @@ enum netdev_tx icssg_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev
{
struct cppi5_host_desc_t *first_desc, *next_desc, *cur_desc;
struct prueth_emac *emac = netdev_priv(ndev);
struct prueth *prueth = emac->prueth;
struct netdev_queue *netif_txq;
struct prueth_tx_chn *tx_chn;
dma_addr_t desc_dma, buf_dma;
u32 pkt_len, dst_tag_id;
int i, ret = 0, q_idx;
bool in_tx_ts = 0;
int tx_ts_cookie;
void **swdata;
u32 pkt_len;
u32 *epib;

pkt_len = skb_headlen(skb);
Expand Down Expand Up @@ -712,9 +713,20 @@ enum netdev_tx icssg_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev

/* set dst tag to indicate internal qid at the firmware which is at
* bit8..bit15. bit0..bit7 indicates port num for directed
* packets in case of switch mode operation
* packets in case of switch mode operation and port num 0
* for undirected packets in case of HSR offload mode
*/
cppi5_desc_set_tags_ids(&first_desc->hdr, 0, (emac->port_id | (q_idx << 8)));
dst_tag_id = emac->port_id | (q_idx << 8);

if (prueth->is_hsr_offload_mode &&
(ndev->features & NETIF_F_HW_HSR_DUP))
dst_tag_id = PRUETH_UNDIRECTED_PKT_DST_TAG;

if (prueth->is_hsr_offload_mode &&
(ndev->features & NETIF_F_HW_HSR_TAG_INS))
epib[1] |= PRUETH_UNDIRECTED_PKT_TAG_INS;

cppi5_desc_set_tags_ids(&first_desc->hdr, 0, dst_tag_id);
k3_udma_glue_tx_dma_to_cppi5_addr(tx_chn->tx_chn, &buf_dma);
cppi5_hdesc_attach_buf(first_desc, buf_dma, pkt_len, buf_dma, pkt_len);
swdata = cppi5_hdesc_get_swdata(first_desc);
Expand Down
22 changes: 12 additions & 10 deletions drivers/net/ethernet/ti/icssg/icssg_config.c
Original file line number Diff line number Diff line change
Expand Up @@ -107,7 +107,7 @@ static const struct map hwq_map[2][ICSSG_NUM_OTHER_QUEUES] = {
},
};

static void icssg_config_mii_init_switch(struct prueth_emac *emac)
static void icssg_config_mii_init_fw_offload(struct prueth_emac *emac)
{
struct prueth *prueth = emac->prueth;
int mii = prueth_emac_slice(emac);
Expand Down Expand Up @@ -278,7 +278,7 @@ static int emac_r30_is_done(struct prueth_emac *emac)
return 1;
}

static int prueth_switch_buffer_setup(struct prueth_emac *emac)
static int prueth_fw_offload_buffer_setup(struct prueth_emac *emac)
{
struct icssg_buffer_pool_cfg __iomem *bpool_cfg;
struct icssg_rxq_ctx __iomem *rxq_ctx;
Expand Down Expand Up @@ -424,7 +424,7 @@ static void icssg_init_emac_mode(struct prueth *prueth)
icssg_class_set_host_mac_addr(prueth->miig_rt, mac);
}

static void icssg_init_switch_mode(struct prueth *prueth)
static void icssg_init_fw_offload_mode(struct prueth *prueth)
{
u32 addr = prueth->shram.pa + EMAC_ICSSG_SWITCH_DEFAULT_VLAN_TABLE_OFFSET;
int i;
Expand Down Expand Up @@ -455,8 +455,8 @@ int icssg_config(struct prueth *prueth, struct prueth_emac *emac, int slice)
struct icssg_flow_cfg __iomem *flow_cfg;
int ret;

if (prueth->is_switch_mode)
icssg_init_switch_mode(prueth);
if (prueth->is_switch_mode || prueth->is_hsr_offload_mode)
icssg_init_fw_offload_mode(prueth);
else
icssg_init_emac_mode(prueth);

Expand All @@ -472,8 +472,8 @@ int icssg_config(struct prueth *prueth, struct prueth_emac *emac, int slice)
regmap_update_bits(prueth->miig_rt, ICSSG_CFG_OFFSET,
ICSSG_CFG_DEFAULT, ICSSG_CFG_DEFAULT);
icssg_miig_set_interface_mode(prueth->miig_rt, slice, emac->phy_if);
if (prueth->is_switch_mode)
icssg_config_mii_init_switch(emac);
if (prueth->is_switch_mode || prueth->is_hsr_offload_mode)
icssg_config_mii_init_fw_offload(emac);
else
icssg_config_mii_init(emac);
icssg_config_ipg(emac);
Expand All @@ -498,8 +498,8 @@ int icssg_config(struct prueth *prueth, struct prueth_emac *emac, int slice)
writeb(0, config + SPL_PKT_DEFAULT_PRIORITY);
writeb(0, config + QUEUE_NUM_UNTAGGED);

if (prueth->is_switch_mode)
ret = prueth_switch_buffer_setup(emac);
if (prueth->is_switch_mode || prueth->is_hsr_offload_mode)
ret = prueth_fw_offload_buffer_setup(emac);
else
ret = prueth_emac_buffer_setup(emac);
if (ret)
Expand Down Expand Up @@ -531,7 +531,9 @@ static const struct icssg_r30_cmd emac_r32_bitmask[] = {
{{EMAC_NONE, 0xffff4000, EMAC_NONE, EMAC_NONE}}, /* Preemption on Tx ENABLE*/
{{EMAC_NONE, 0xbfff0000, EMAC_NONE, EMAC_NONE}}, /* Preemption on Tx DISABLE*/
{{0xffff0010, EMAC_NONE, 0xffff0010, EMAC_NONE}}, /* VLAN AWARE*/
{{0xffef0000, EMAC_NONE, 0xffef0000, EMAC_NONE}} /* VLAN UNWARE*/
{{0xffef0000, EMAC_NONE, 0xffef0000, EMAC_NONE}}, /* VLAN UNWARE*/
{{0xffff2000, EMAC_NONE, EMAC_NONE, EMAC_NONE}}, /* HSR_RX_OFFLOAD_ENABLE */
{{0xdfff0000, EMAC_NONE, EMAC_NONE, EMAC_NONE}} /* HSR_RX_OFFLOAD_DISABLE */
};

int icssg_set_port_state(struct prueth_emac *emac,
Expand Down
2 changes: 2 additions & 0 deletions drivers/net/ethernet/ti/icssg/icssg_config.h
Original file line number Diff line number Diff line change
Expand Up @@ -80,6 +80,8 @@ enum icssg_port_state_cmd {
ICSSG_EMAC_PORT_PREMPT_TX_DISABLE,
ICSSG_EMAC_PORT_VLAN_AWARE_ENABLE,
ICSSG_EMAC_PORT_VLAN_AWARE_DISABLE,
ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE,
ICSSG_EMAC_HSR_RX_OFFLOAD_DISABLE,
ICSSG_EMAC_PORT_MAX_COMMANDS
};

Expand Down
Loading

0 comments on commit 3254ce8

Please sign in to comment.