Merge tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux

Pull block updates from Jens Axboe:

 - NVMe pull requests via Christoph:
      - Support some passthrough commands without CAP_SYS_ADMIN (Kanchan
        Joshi)
      - Refactor PCIe probing and reset (Christoph Hellwig)
      - Various fabrics authentication fixes and improvements (Sagi
        Grimberg)
      - Avoid fallback to sequential scan due to transient issues (Uday
        Shankar)
      - Implement support for the DEAC bit in Write Zeroes (Christoph
        Hellwig)
      - Allow overriding the IEEE OUI and firmware revision in configfs
        for nvmet (Aleksandr Miloserdov)
      - Force reconnect when number of queue changes in nvmet (Daniel
        Wagner)
      - Minor fixes and improvements (Uros Bizjak, Joel Granados, Sagi
        Grimberg, Christoph Hellwig, Christophe JAILLET)
      - Fix and cleanup nvme-fc req allocation (Chaitanya Kulkarni)
      - Use the common tagset helpers in nvme-pci driver (Christoph
        Hellwig)
      - Cleanup the nvme-pci removal path (Christoph Hellwig)
      - Use kstrtobool() instead of strtobool (Christophe JAILLET)
      - Allow unprivileged passthrough of Identify Controller (Joel
        Granados)
      - Support io stats on the mpath device (Sagi Grimberg)
      - Minor nvmet cleanup (Sagi Grimberg)

 - MD pull requests via Song:
      - Code cleanups (Christoph)
      - Various fixes

 - Floppy pull request from Denis:
      - Fix a memory leak in the init error path (Yuan)

 - Series fixing some batch wakeup issues with sbitmap (Gabriel)

 - Removal of the pktcdvd driver that was deprecated more than 5 years
   ago, and subsequent removal of the devnode callback in struct
   block_device_operations as no users are now left (Greg)

 - Fix for partition read on an exclusively opened bdev (Jan)

 - Series of elevator API cleanups (Jinlong, Christoph)

 - Series of fixes and cleanups for blk-iocost (Kemeng)

 - Series of fixes and cleanups for blk-throttle (Kemeng)

 - Series adding concurrent support for sync queues in BFQ (Yu)

 - Series bringing drbd a bit closer to the out-of-tree maintained
   version (Christian, Joel, Lars, Philipp)

 - Misc drbd fixes (Wang)

 - blk-wbt fixes and tweaks for enable/disable (Yu)

 - Fixes for mq-deadline for zoned devices (Damien)

 - Add support for read-only and offline zones for null_blk
   (Shin'ichiro)

 - Series fixing the delayed holder tracking, as used by DM (Yu,
   Christoph)

 - Series enabling bio alloc caching for IRQ based IO (Pavel)

 - Series enabling userspace peer-to-peer DMA (Logan)

 - BFQ waker fixes (Khazhismel)

 - Series fixing elevator refcount issues (Christoph, Jinlong)

 - Series cleaning up references around queue destruction (Christoph)

 - Series doing quiesce by tagset, enabling cleanups in drivers
   (Christoph, Chao)

 - Series untangling the queue kobject and queue references (Christoph)

 - Misc fixes and cleanups (Bart, David, Dawei, Jinlong, Kemeng, Ye,
   Yang, Waiman, Shin'ichiro, Randy, Pankaj, Christoph)

* tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux: (247 commits)
  blktrace: Fix output non-blktrace event when blk_classic option enabled
  block: sed-opal: Don't include <linux/kernel.h>
  sed-opal: allow using IOC_OPAL_SAVE for locking too
  blk-cgroup: Fix typo in comment
  block: remove bio_set_op_attrs
  nvmet: don't open-code NVME_NS_ATTR_RO enumeration
  nvme-pci: use the tagset alloc/free helpers
  nvme: add the Apple shared tag workaround to nvme_alloc_io_tag_set
  nvme: only set reserved_tags in nvme_alloc_io_tag_set for fabrics controllers
  nvme: consolidate setting the tagset flags
  nvme: pass nr_maps explicitly to nvme_alloc_io_tag_set
  block: bio_copy_data_iter
  nvme-pci: split out a nvme_pci_ctrl_is_dead helper
  nvme-pci: return early on ctrl state mismatch in nvme_reset_work
  nvme-pci: rename nvme_disable_io_queues
  nvme-pci: cleanup nvme_suspend_queue
  nvme-pci: remove nvme_pci_disable
  nvme-pci: remove nvme_disable_admin_queue
  nvme: merge nvme_shutdown_ctrl into nvme_disable_ctrl
  nvme: use nvme_wait_ready in nvme_shutdown_ctrl
  ...

Documentation/ABI/testing/sysfs-bus-pci

@@ -407,6 +407,16 @@ Description:
 	        file contains a '1' if the memory has been published for
 		use outside the driver that owns the device.
 
+What:		/sys/bus/pci/devices/.../p2pmem/allocate
+Date:		August 2022
+Contact:	Logan Gunthorpe <[email protected]>
+Description:
+		This file allows mapping p2pmem into userspace. For each
+		mmap() call on this file, the kernel will allocate a chunk
+		of Peer-to-Peer memory for use in Peer-to-Peer transactions.
+		This memory can be used in O_DIRECT calls to NVMe backed
+		files for Peer-to-Peer copies.
+
 What:		/sys/bus/pci/devices/.../link/clkpm
 		/sys/bus/pci/devices/.../link/l0s_aspm
 		/sys/bus/pci/devices/.../link/l1_aspm

Documentation/block/inline-encryption.rst

@@ -142,7 +142,7 @@ Therefore, we also introduce *blk-crypto-fallback*, which is an implementation
 of inline encryption using the kernel crypto API.  blk-crypto-fallback is built
 into the block layer, so it works on any block device without any special setup.
 Essentially, when a bio with an encryption context is submitted to a
-request_queue that doesn't support that encryption context, the block layer will
+block_device that doesn't support that encryption context, the block layer will
 handle en/decryption of the bio using blk-crypto-fallback.
 
 For encryption, the data cannot be encrypted in-place, as callers usually rely
@@ -187,15 +187,15 @@ API presented to users of the block layer
 
 ``blk_crypto_config_supported()`` allows users to check ahead of time whether
 inline encryption with particular crypto settings will work on a particular
-request_queue -- either via hardware or via blk-crypto-fallback.  This function
+block_device -- either via hardware or via blk-crypto-fallback.  This function
 takes in a ``struct blk_crypto_config`` which is like blk_crypto_key, but omits
 the actual bytes of the key and instead just contains the algorithm, data unit
 size, etc.  This function can be useful if blk-crypto-fallback is disabled.
 
 ``blk_crypto_init_key()`` allows users to initialize a blk_crypto_key.
 
 Users must call ``blk_crypto_start_using_key()`` before actually starting to use
-a blk_crypto_key on a request_queue (even if ``blk_crypto_config_supported()``
+a blk_crypto_key on a block_device (even if ``blk_crypto_config_supported()``
 was called earlier).  This is needed to initialize blk-crypto-fallback if it
 will be needed.  This must not be called from the data path, as this may have to
 allocate resources, which may deadlock in that case.
@@ -207,7 +207,7 @@ for en/decryption.  Users don't need to worry about freeing the bio_crypt_ctx
 later, as that happens automatically when the bio is freed or reset.
 
 Finally, when done using inline encryption with a blk_crypto_key on a
-request_queue, users must call ``blk_crypto_evict_key()``.  This ensures that
+block_device, users must call ``blk_crypto_evict_key()``.  This ensures that
 the key is evicted from all keyslots it may be programmed into and unlinked from
 any kernel data structures it may be linked into.
 
@@ -221,9 +221,9 @@ as follows:
 5. ``blk_crypto_evict_key()`` (after all I/O has completed)
 6. Zeroize the blk_crypto_key (this has no dedicated function)
 
-If a blk_crypto_key is being used on multiple request_queues, then
+If a blk_crypto_key is being used on multiple block_devices, then
 ``blk_crypto_config_supported()`` (if used), ``blk_crypto_start_using_key()``,
-and ``blk_crypto_evict_key()`` must be called on each request_queue.
+and ``blk_crypto_evict_key()`` must be called on each block_device.
 
 API presented to device drivers
 ===============================

MAINTAINERS

@@ -16430,13 +16430,6 @@ S:	Supported
 F:	Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml
 F:	drivers/input/keyboard/pinephone-keyboard.c
 
-PKTCDVD DRIVER
-M:	[email protected]
-S:	Orphan
-F:	drivers/block/pktcdvd.c
-F:	include/linux/pktcdvd.h
-F:	include/uapi/linux/pktcdvd.h
-
 PLANTOWER PMS7003 AIR POLLUTION SENSOR DRIVER
 M:	Tomasz Duszynski <[email protected]>
 S:	Maintained

block/bdev.c

@@ -224,7 +224,7 @@ int fsync_bdev(struct block_device *bdev)
 EXPORT_SYMBOL(fsync_bdev);
 
 /**
- * freeze_bdev  --  lock a filesystem and force it into a consistent state
+ * freeze_bdev - lock a filesystem and force it into a consistent state
  * @bdev:	blockdevice to lock
  *
  * If a superblock is found on this device, we take the s_umount semaphore
@@ -268,7 +268,7 @@ int freeze_bdev(struct block_device *bdev)
 EXPORT_SYMBOL(freeze_bdev);
 
 /**
- * thaw_bdev  -- unlock filesystem
+ * thaw_bdev - unlock filesystem
  * @bdev:	blockdevice to unlock
  *
  * Unlocks the filesystem and marks it writeable again after freeze_bdev().

block/bfq-cgroup.c

@@ -224,7 +224,7 @@ void bfqg_stats_update_io_add(struct bfq_group *bfqg, struct bfq_queue *bfqq,
 {
 	blkg_rwstat_add(&bfqg->stats.queued, opf, 1);
 	bfqg_stats_end_empty_time(&bfqg->stats);
-	if (!(bfqq == ((struct bfq_data *)bfqg->bfqd)->in_service_queue))
+	if (!(bfqq == bfqg->bfqd->in_service_queue))
 		bfqg_stats_set_start_group_wait_time(bfqg, bfqq_group(bfqq));
 }
 
@@ -552,6 +552,7 @@ static void bfq_pd_init(struct blkg_policy_data *pd)
 				   */
 	bfqg->bfqd = bfqd;
 	bfqg->active_entities = 0;
+	bfqg->num_queues_with_pending_reqs = 0;
 	bfqg->online = true;
 	bfqg->rq_pos_tree = RB_ROOT;
 }
@@ -645,6 +646,7 @@ void bfq_bfqq_move(struct bfq_data *bfqd, struct bfq_queue *bfqq,
 {
 	struct bfq_entity *entity = &bfqq->entity;
 	struct bfq_group *old_parent = bfqq_group(bfqq);
+	bool has_pending_reqs = false;
 
 	/*
 	 * No point to move bfqq to the same group, which can happen when
@@ -665,6 +667,11 @@ void bfq_bfqq_move(struct bfq_data *bfqd, struct bfq_queue *bfqq,
 	 */
 	bfqq->ref++;
 
+	if (entity->in_groups_with_pending_reqs) {
+		has_pending_reqs = true;
+		bfq_del_bfqq_in_groups_with_pending_reqs(bfqq);
+	}
+
 	/* If bfqq is empty, then bfq_bfqq_expire also invokes
 	 * bfq_del_bfqq_busy, thereby removing bfqq and its entity
 	 * from data structures related to current group. Otherwise we
@@ -692,6 +699,9 @@ void bfq_bfqq_move(struct bfq_data *bfqd, struct bfq_queue *bfqq,
 	/* pin down bfqg and its associated blkg  */
 	bfqg_and_blkg_get(bfqg);
 
+	if (has_pending_reqs)
+		bfq_add_bfqq_in_groups_with_pending_reqs(bfqq);
+
 	if (bfq_bfqq_busy(bfqq)) {
 		if (unlikely(!bfqd->nonrot_with_queueing))
 			bfq_pos_tree_add_move(bfqd, bfqq);