Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

.mailmap

@@ -107,6 +107,7 @@ Linus Lüssing <[email protected]> <[email protected]>
 Maciej W. Rozycki <[email protected]> <[email protected]>
 Marcin Nowakowski <[email protected]> <[email protected]>
 Mark Brown <[email protected]>
+Mark Yao <[email protected]> <[email protected]>
 Martin Kepplinger <[email protected]> <[email protected]>
 Martin Kepplinger <[email protected]> <[email protected]>
 Matthieu CASTET <[email protected]>

Documentation/admin-guide/kernel-parameters.rst

@@ -109,6 +109,7 @@ parameter is applicable::
 	IPV6	IPv6 support is enabled.
 	ISAPNP	ISA PnP code is enabled.
 	ISDN	Appropriate ISDN support is enabled.
+	ISOL	CPU Isolation is enabled.
 	JOY	Appropriate joystick support is enabled.
 	KGDB	Kernel debugger support is enabled.
 	KVM	Kernel Virtual Machine support is enabled.

Documentation/admin-guide/kernel-parameters.txt

@@ -328,11 +328,15 @@
 			not play well with APC CPU idle - disable it if you have
 			APC and your system crashes randomly.
 
-	apic=		[APIC,X86-32] Advanced Programmable Interrupt Controller
+	apic=		[APIC,X86] Advanced Programmable Interrupt Controller
 			Change the output verbosity whilst booting
 			Format: { quiet (default) | verbose | debug }
 			Change the amount of debugging information output
 			when initialising the APIC and IO-APIC components.
+			For X86-32, this can also be used to specify an APIC
+			driver name.
+			Format: apic=driver_name
+			Examples: apic=bigsmp
 
 	apic_extnmi=	[APIC,X86] External NMI delivery setting
 			Format: { bsp (default) | all | none }
@@ -1737,7 +1741,7 @@
 	isapnp=		[ISAPNP]
 			Format: <RDP>,<reset>,<pci_scan>,<verbosity>
 
-	isolcpus=	[KNL,SMP] Isolate a given set of CPUs from disturbance.
+	isolcpus=	[KNL,SMP,ISOL] Isolate a given set of CPUs from disturbance.
 			[Deprecated - use cpusets instead]
 			Format: [flag-list,]<cpu-list>
 
@@ -2662,7 +2666,7 @@
 			Valid arguments: on, off
 			Default: on
 
-	nohz_full=	[KNL,BOOT]
+	nohz_full=	[KNL,BOOT,SMP,ISOL]
 			The argument is a cpu list, as described above.
 			In kernels built with CONFIG_NO_HZ_FULL=y, set
 			the specified list of CPUs whose tick will be stopped
@@ -2708,6 +2712,8 @@
 			steal time is computed, but won't influence scheduler
 			behaviour
 
+	nopti		[X86-64] Disable kernel page table isolation
+
 	nolapic		[X86-32,APIC] Do not enable or use the local APIC.
 
 	nolapic_timer	[X86-32,APIC] Do not use the local APIC timer.
@@ -3282,6 +3288,12 @@
 	pt.		[PARIDE]
 			See Documentation/blockdev/paride.txt.
 
+	pti=		[X86_64]
+			Control user/kernel address space isolation:
+			on - enable
+			off - disable
+			auto - default setting
+
 	pty.legacy_count=
 			[KNL] Number of legacy pty's. Overwrites compiled-in
 			default number.

Documentation/admin-guide/thunderbolt.rst

@@ -230,7 +230,7 @@ If supported by your machine this will be exposed by the WMI bus with
 a sysfs attribute called "force_power".
 
 For example the intel-wmi-thunderbolt driver exposes this attribute in:
-  /sys/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/86CCFD48-205E-4A77-9C48-2021CBEDE341/force_power
+  /sys/bus/wmi/devices/86CCFD48-205E-4A77-9C48-2021CBEDE341/force_power
 
   To force the power to on, write 1 to this attribute file.
   To disable force power, write 0 to this attribute file.

Documentation/gpu/i915.rst

@@ -341,10 +341,7 @@ GuC
 GuC-specific firmware loader
 ----------------------------
 
-.. kernel-doc:: drivers/gpu/drm/i915/intel_guc_loader.c
-   :doc: GuC-specific firmware loader
-
-.. kernel-doc:: drivers/gpu/drm/i915/intel_guc_loader.c
+.. kernel-doc:: drivers/gpu/drm/i915/intel_guc_fw.c
    :internal:
 
 GuC-based command submission

Documentation/x86/x86_64/mm.txt

@@ -12,7 +12,9 @@ ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB)
 ... unused hole ...
 ffffec0000000000 - fffffbffffffffff (=44 bits) kasan shadow memory (16TB)
 ... unused hole ...
-fffffe8000000000 - fffffeffffffffff (=39 bits) cpu_entry_area mapping
+				    vaddr_end for KASLR
+fffffe0000000000 - fffffe7fffffffff (=39 bits) cpu_entry_area mapping
+fffffe8000000000 - fffffeffffffffff (=39 bits) LDT remap for PTI
 ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks
 ... unused hole ...
 ffffffef00000000 - fffffffeffffffff (=64 GB) EFI region mapping space
@@ -29,20 +31,22 @@ Virtual memory map with 5 level page tables:
 hole caused by [56:63] sign extension
 ff00000000000000 - ff0fffffffffffff (=52 bits) guard hole, reserved for hypervisor
 ff10000000000000 - ff8fffffffffffff (=55 bits) direct mapping of all phys. memory
-ff90000000000000 - ff91ffffffffffff (=49 bits) hole
-ff92000000000000 - ffd1ffffffffffff (=54 bits) vmalloc/ioremap space
+ff90000000000000 - ff9fffffffffffff (=52 bits) LDT remap for PTI
+ffa0000000000000 - ffd1ffffffffffff (=54 bits) vmalloc/ioremap space (12800 TB)
 ffd2000000000000 - ffd3ffffffffffff (=49 bits) hole
 ffd4000000000000 - ffd5ffffffffffff (=49 bits) virtual memory map (512TB)
 ... unused hole ...
 ffdf000000000000 - fffffc0000000000 (=53 bits) kasan shadow memory (8PB)
 ... unused hole ...
-fffffe8000000000 - fffffeffffffffff (=39 bits) cpu_entry_area mapping
+				    vaddr_end for KASLR
+fffffe0000000000 - fffffe7fffffffff (=39 bits) cpu_entry_area mapping
+... unused hole ...
 ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks
 ... unused hole ...
 ffffffef00000000 - fffffffeffffffff (=64 GB) EFI region mapping space
 ... unused hole ...
 ffffffff80000000 - ffffffff9fffffff (=512 MB)  kernel text mapping, from phys 0
-ffffffffa0000000 - [fixmap start]   (~1526 MB) module mapping space
+ffffffffa0000000 - fffffffffeffffff (1520 MB) module mapping space
 [fixmap start]   - ffffffffff5fffff kernel-internal fixmap range
 ffffffffff600000 - ffffffffff600fff (=4 kB) legacy vsyscall ABI
 ffffffffffe00000 - ffffffffffffffff (=2 MB) unused hole
@@ -66,9 +70,10 @@ memory window (this size is arbitrary, it can be raised later if needed).
 The mappings are not part of any other kernel PGD and are only available
 during EFI runtime calls.
 
-The module mapping space size changes based on the CONFIG requirements for the
-following fixmap section.
-
 Note that if CONFIG_RANDOMIZE_MEMORY is enabled, the direct mapping of all
 physical memory, vmalloc/ioremap space and virtual memory map are randomized.
 Their order is preserved but their base will be offset early at boot time.
+
+Be very careful vs. KASLR when changing anything here. The KASLR address
+range must not overlap with anything except the KASAN shadow area, which is
+correct as KASAN disables KASLR.

MAINTAINERS

@@ -2622,50 +2622,48 @@ F:	fs/bfs/
 F:	include/uapi/linux/bfs_fs.h
 
 BLACKFIN ARCHITECTURE
-M:	Steven Miao <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
 T:	git git://git.code.sf.net/p/adi-linux/code
 W:	http://blackfin.uclinux.org
-S:	Supported
+S:	Orphan
 F:	arch/blackfin/
 
 BLACKFIN EMAC DRIVER
 L:	[email protected] (moderated for non-subscribers)
 W:	http://blackfin.uclinux.org
-S:	Supported
+S:	Orphan
 F:	drivers/net/ethernet/adi/
 
 BLACKFIN MEDIA DRIVER
-M:	Scott Jiang <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
 W:	http://blackfin.uclinux.org/
-S:	Supported
+S:	Orphan
 F:	drivers/media/platform/blackfin/
 F:	drivers/media/i2c/adv7183*
 F:	drivers/media/i2c/vs6624*
 
 BLACKFIN RTC DRIVER
 L:	[email protected] (moderated for non-subscribers)
 W:	http://blackfin.uclinux.org
-S:	Supported
+S:	Orphan
 F:	drivers/rtc/rtc-bfin.c
 
 BLACKFIN SDH DRIVER
 L:	[email protected] (moderated for non-subscribers)
 W:	http://blackfin.uclinux.org
-S:	Supported
+S:	Orphan
 F:	drivers/mmc/host/bfin_sdh.c
 
 BLACKFIN SERIAL DRIVER
 L:	[email protected] (moderated for non-subscribers)
 W:	http://blackfin.uclinux.org
-S:	Supported
+S:	Orphan
 F:	drivers/tty/serial/bfin_uart.c
 
 BLACKFIN WATCHDOG DRIVER
 L:	[email protected] (moderated for non-subscribers)
 W:	http://blackfin.uclinux.org
-S:	Supported
+S:	Orphan
 F:	drivers/watchdog/bfin_wdt.c
 
 BLINKM RGB LED DRIVER
@@ -5154,15 +5152,15 @@ F:	sound/usb/misc/ua101.c
 EFI TEST DRIVER
 L:	[email protected]
 M:	Ivan Hu <[email protected]>
-M:	Matt Fleming <[email protected]>
+M:	Ard Biesheuvel <[email protected]>
 S:	Maintained
 F:	drivers/firmware/efi/test/
 
 EFI VARIABLE FILESYSTEM
 M:	Matthew Garrett <[email protected]>
 M:	Jeremy Kerr <[email protected]>
-M:	Matt Fleming <[email protected]>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi.git
+M:	Ard Biesheuvel <[email protected]>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi.git
 L:	[email protected]
 S:	Maintained
 F:	fs/efivarfs/
@@ -5323,7 +5321,6 @@ S:	Supported
 F:	security/integrity/evm/
 
 EXTENSIBLE FIRMWARE INTERFACE (EFI)
-M:	Matt Fleming <[email protected]>
 M:	Ard Biesheuvel <[email protected]>
 L:	[email protected]
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi.git
@@ -10152,7 +10149,7 @@ F:	drivers/irqchip/irq-ompic.c
 F:	drivers/irqchip/irq-or1k-*
 
 OPENVSWITCH
-M:	Pravin Shelar <pshelar@nicira.com>
+M:	Pravin B Shelar <pshelar@ovn.org>
 L:	[email protected]
 L:	[email protected]
 W:	http://openvswitch.org
@@ -13508,6 +13505,7 @@ M:	Mika Westerberg <[email protected]>
 M:	Yehezkel Bernat <[email protected]>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt.git
 S:	Maintained
+F:	Documentation/admin-guide/thunderbolt.rst
 F:	drivers/thunderbolt/
 F:	include/linux/thunderbolt.h
 

Makefile

@@ -2,7 +2,7 @@
 VERSION = 4
 PATCHLEVEL = 15
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc7
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*
@@ -789,6 +789,9 @@ KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
 # disable invalid "can't wrap" optimizations for signed / pointers
 KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
 
+# Make sure -fstack-check isn't enabled (like gentoo apparently did)
+KBUILD_CFLAGS  += $(call cc-option,-fno-stack-check,)
+
 # conserve stack if available
 KBUILD_CFLAGS   += $(call cc-option,-fconserve-stack)
 

arch/arc/boot/dts/axc003.dtsi

@@ -35,6 +35,14 @@
 			reg = <0x80 0x10>, <0x100 0x10>;
 			#clock-cells = <0>;
 			clocks = <&input_clk>;
+
+			/*
+			 * Set initial core pll output frequency to 90MHz.
+			 * It will be applied at the core pll driver probing
+			 * on early boot.
+			 */
+			assigned-clocks = <&core_clk>;
+			assigned-clock-rates = <90000000>;
 		};
 
 		core_intc: archs-intc@cpu {

arch/arc/boot/dts/axc003_idu.dtsi

@@ -35,6 +35,14 @@
 			reg = <0x80 0x10>, <0x100 0x10>;
 			#clock-cells = <0>;
 			clocks = <&input_clk>;
+
+			/*
+			 * Set initial core pll output frequency to 100MHz.
+			 * It will be applied at the core pll driver probing
+			 * on early boot.
+			 */
+			assigned-clocks = <&core_clk>;
+			assigned-clock-rates = <100000000>;
 		};
 
 		core_intc: archs-intc@cpu {

arch/arc/boot/dts/hsdk.dts

@@ -114,6 +114,14 @@
 			reg = <0x00 0x10>, <0x14B8 0x4>;
 			#clock-cells = <0>;
 			clocks = <&input_clk>;
+
+			/*
+			 * Set initial core pll output frequency to 1GHz.
+			 * It will be applied at the core pll driver probing
+			 * on early boot.
+			 */
+			assigned-clocks = <&core_clk>;
+			assigned-clock-rates = <1000000000>;
 		};
 
 		serial: serial@5000 {

arch/arc/configs/hsdk_defconfig

@@ -49,10 +49,11 @@ CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
+CONFIG_DRM=y
+# CONFIG_DRM_FBDEV_EMULATION is not set
+CONFIG_DRM_UDL=y
 CONFIG_FB=y
-CONFIG_FB_UDL=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_OHCI_HCD=y

arch/arc/include/asm/uaccess.h

@@ -668,6 +668,7 @@ __arc_strncpy_from_user(char *dst, const char __user *src, long count)
 		return 0;
 
 	__asm__ __volatile__(
+	"	mov	lp_count, %5		\n"
 	"	lp	3f			\n"
 	"1:	ldb.ab  %3, [%2, 1]		\n"
 	"	breq.d	%3, 0, 3f               \n"
@@ -684,8 +685,8 @@ __arc_strncpy_from_user(char *dst, const char __user *src, long count)
 	"	.word   1b, 4b			\n"
 	"	.previous			\n"
 	: "+r"(res), "+r"(dst), "+r"(src), "=r"(val)
-	: "g"(-EFAULT), "l"(count)
-	: "memory");
+	: "g"(-EFAULT), "r"(count)
+	: "lp_count", "lp_start", "lp_end", "memory");
 
 	return res;
 }

arch/arc/kernel/setup.c

@@ -199,7 +199,7 @@ static void read_arc_build_cfg_regs(void)
 			unsigned int exec_ctrl;
 
 			READ_BCR(AUX_EXEC_CTRL, exec_ctrl);
-			cpu->extn.dual_enb = exec_ctrl & 1;
+			cpu->extn.dual_enb = !(exec_ctrl & 1);
 
 			/* dual issue always present for this core */
 			cpu->extn.dual = 1;

arch/arc/kernel/stacktrace.c

@@ -163,7 +163,7 @@ arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs,
  */
 static int __print_sym(unsigned int address, void *unused)
 {
-	__print_symbol("  %s\n", address);
+	printk("  %pS\n", (void *)address);
 	return 0;
 }