Merge tag 'renesas-fixes-for-v5.9-tag1' of git://git.kernel.org/pub/s…

…cm/linux/kernel/git/geert/renesas-devel into arm/fixes Renesas fixes for v5.9 - Fix touch controller probe failure on the iWave RainboW G20D Qseven board. * tag 'renesas-fixes-for-v5.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: iwg20d-q7-common: Fix touch controller probe failure Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
simonjhall · Oct 3, 2020 · fbbb7c5 · fbbb7c5
2 parents 6b9c8c8 + 08d7a73
commit fbbb7c5
Showing 1 changed file with 14 additions and 1 deletion.
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -57,7 +57,7 @@
 
 	lvds-receiver {
 		compatible = "ti,ds90cf384a", "lvds-decoder";
-		powerdown-gpios = <&gpio7 25 GPIO_ACTIVE_LOW>;
+		power-supply = <&vcc_3v3_tft1>;
 
 		ports {
 			#address-cells = <1>;
@@ -81,6 +81,7 @@
 	panel {
 		compatible = "edt,etm0700g0dh6";
 		backlight = <&lcd_backlight>;
+		power-supply = <&vcc_3v3_tft1>;
 
 		port {
 			panel_in: endpoint {
@@ -113,6 +114,17 @@
 		};
 	};
 
+	vcc_3v3_tft1: regulator-panel {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vcc-3v3-tft1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		startup-delay-us = <500>;
+		gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
+	};
+
 	vcc_sdhi1: regulator-vcc-sdhi1 {
 		compatible = "regulator-fixed";
 
@@ -207,6 +219,7 @@
 		reg = <0x38>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		vcc-supply = <&vcc_3v3_tft1>;
 	};
 };