Merge tag 'devicetree-fixes-for-5.2' of git://git.kernel.org/pub/scm/…

…linux/kernel/git/robh/linux Pull Devicetree fixes from Rob Herring: - Update checkpatch.pl to use DT vendor-prefixes.yaml - Fix DT binding references to files converted to DT schema - Clean-up Arm CPU binding examples to match schema - Add Sifive block versioning scheme documentation - Pass binding directory base to validation tools for reference lookups * tag 'devicetree-fixes-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: checkpatch.pl: Update DT vendor prefix check dt: bindings: mtd: replace references to nand.txt with nand-controller.yaml dt-bindings: interrupt-controller: arm,gic: Fix schema errors in example dt-bindings: arm: Clean up CPU binding examples dt: fix refs that were renamed to json with the same file name dt-bindings: Pass binding directory to validation tools dt-bindings: sifive: describe sifive-blocks versioning
sirdarckcat · May 24, 2019 · e7bd3e2 · e7bd3e2
2 parents 86c2f5d + 852d095
commit e7bd3e2
Show file tree

Hide file tree

Showing 27 changed files with 108 additions and 68 deletions.
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile
@@ -5,7 +5,7 @@ DT_MK_SCHEMA ?= dt-mk-schema
 DT_MK_SCHEMA_FLAGS := $(if $(DT_SCHEMA_FILES), -u)
 
 quiet_cmd_chk_binding = CHKDT   $(patsubst $(srctree)/%,%,$<)
-      cmd_chk_binding = $(DT_DOC_CHECKER) $< ; \
+      cmd_chk_binding = $(DT_DOC_CHECKER) -u $(srctree)/$(src) $< ; \
                         $(DT_EXTRACT_EX) $< > $@
 
 $(obj)/%.example.dts: $(src)/%.yaml FORCE

diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
@@ -216,7 +216,7 @@ Example:
 		#size-cells = <0>;
 
 		A57_0: cpu@0 {
-			compatible = "arm,cortex-a57","arm,armv8";
+			compatible = "arm,cortex-a57";
 			reg = <0x0 0x0>;
 			device_type = "cpu";
 			enable-method = "psci";
@@ -225,7 +225,7 @@ Example:
 		.....
 
 		A53_0: cpu@100 {
-			compatible = "arm,cortex-a53","arm,armv8";
+			compatible = "arm,cortex-a53";
 			reg = <0x0 0x100>;
 			device_type = "cpu";
 			enable-method = "psci";

diff --git a/Documentation/devicetree/bindings/arm/cpu-capacity.txt b/Documentation/devicetree/bindings/arm/cpu-capacity.txt
@@ -118,7 +118,7 @@ cpus {
 	};
 
 	A57_0: cpu@0 {
-		compatible = "arm,cortex-a57","arm,armv8";
+		compatible = "arm,cortex-a57";
 		reg = <0x0 0x0>;
 		device_type = "cpu";
 		enable-method = "psci";
@@ -129,7 +129,7 @@ cpus {
 	};
 
 	A57_1: cpu@1 {
-		compatible = "arm,cortex-a57","arm,armv8";
+		compatible = "arm,cortex-a57";
 		reg = <0x0 0x1>;
 		device_type = "cpu";
 		enable-method = "psci";
@@ -140,7 +140,7 @@ cpus {
 	};
 
 	A53_0: cpu@100 {
-		compatible = "arm,cortex-a53","arm,armv8";
+		compatible = "arm,cortex-a53";
 		reg = <0x0 0x100>;
 		device_type = "cpu";
 		enable-method = "psci";
@@ -151,7 +151,7 @@ cpus {
 	};
 
 	A53_1: cpu@101 {
-		compatible = "arm,cortex-a53","arm,armv8";
+		compatible = "arm,cortex-a53";
 		reg = <0x0 0x101>;
 		device_type = "cpu";
 		enable-method = "psci";
@@ -162,7 +162,7 @@ cpus {
 	};
 
 	A53_2: cpu@102 {
-		compatible = "arm,cortex-a53","arm,armv8";
+		compatible = "arm,cortex-a53";
 		reg = <0x0 0x102>;
 		device_type = "cpu";
 		enable-method = "psci";
@@ -173,7 +173,7 @@ cpus {
 	};
 
 	A53_3: cpu@103 {
-		compatible = "arm,cortex-a53","arm,armv8";
+		compatible = "arm,cortex-a53";
 		reg = <0x0 0x103>;
 		device_type = "cpu";
 		enable-method = "psci";

diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
@@ -41,7 +41,7 @@ Examples:
 Consumer:
 ========
 See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt and
-Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt for
+Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml for
 further details.
 
 An interrupt consumer on an SoC using crossbar will use:

diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt
@@ -35,7 +35,7 @@ board device tree, including the system base clock, as selected by XOM[0]
 pin of the SoC. Refer to generic fixed rate clock bindings
 documentation[1] for more information how to specify these clocks.
 
-[1] Documentation/devicetree/bindings/clock/fixed-clock.txt
+[1] Documentation/devicetree/bindings/clock/fixed-clock.yaml
 
 Example: Clock controller node:
 

diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
@@ -92,6 +92,8 @@ properties:
     minItems: 2
     maxItems: 4
 
+  ranges: true
+
   interrupts:
     description: Interrupt source of the parent interrupt controller on
       secondary GICs, or VGIC maintenance interrupt on primary GIC (see
@@ -197,28 +199,28 @@ examples:
     interrupt-controller@e1101000 {
       compatible = "arm,gic-400";
       #interrupt-cells = <3>;
-      #address-cells = <2>;
-      #size-cells = <2>;
+      #address-cells = <1>;
+      #size-cells = <1>;
       interrupt-controller;
       interrupts = <1 8 0xf04>;
-      ranges = <0 0 0 0xe1100000 0 0x100000>;
-      reg = <0x0 0xe1110000 0 0x01000>,
-            <0x0 0xe112f000 0 0x02000>,
-            <0x0 0xe1140000 0 0x10000>,
-            <0x0 0xe1160000 0 0x10000>;
+      ranges = <0 0xe1100000 0x100000>;
+      reg = <0xe1110000 0x01000>,
+            <0xe112f000 0x02000>,
+            <0xe1140000 0x10000>,
+            <0xe1160000 0x10000>;
 
-      v2m0: v2m@8000 {
+      v2m0: v2m@80000 {
         compatible = "arm,gic-v2m-frame";
         msi-controller;
-        reg = <0x0 0x80000 0 0x1000>;
+        reg = <0x80000 0x1000>;
       };
 
       //...
 
-      v2mN: v2m@9000 {
+      v2mN: v2m@90000 {
         compatible = "arm,gic-v2m-frame";
         msi-controller;
-        reg = <0x0 0x90000 0 0x1000>;
+        reg = <0x90000 0x1000>;
       };
     };
 ...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
@@ -23,7 +23,7 @@ Required properties:
 - marvell,spi-base     : List of GIC base SPI interrupts, one for each
                          ODMI frame. Those SPI interrupts are 0-based,
                          i.e marvell,spi-base = <128> will use SPI #96.
-                         See Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
+                         See Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
                          for details about the GIC Device Tree binding.
 
 Example:

diff --git a/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt
@@ -15,7 +15,7 @@ Optional properties:
 	- power-supply: specifies the power source. It can either be a regulator
 	  or a gpio which enables a regulator, i.e. a regulator-fixed as
 	  described in
-	  Documentation/devicetree/bindings/regulator/fixed-regulator.txt
+	  Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
 
 Example:
 

diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
@@ -24,7 +24,7 @@ Optional children nodes:
 Children nodes represent the available nand chips.
 
 Other properties:
-see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings.
+see Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings.
 
 Example demonstrate on AXG SoC:
 

diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
@@ -101,12 +101,12 @@ Required properties:
                               number (e.g., 0, 1, 2, etc.)
 - #address-cells            : see partition.txt
 - #size-cells               : see partition.txt
-- nand-ecc-strength         : see nand.txt
-- nand-ecc-step-size        : must be 512 or 1024. See nand.txt
+- nand-ecc-strength         : see nand-controller.yaml
+- nand-ecc-step-size        : must be 512 or 1024. See nand-controller.yaml
 
 Optional properties:
 - nand-on-flash-bbt         : boolean, to enable the on-flash BBT for this
-                              chip-select. See nand.txt
+                              chip-select. See nand-controller.yaml
 - brcm,nand-oob-sector-size : integer, to denote the spare area sector size
                               expected for the ECC layout in use. This size, in
                               addition to the strength and step-size,

diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt
@@ -22,16 +22,16 @@ Sub-nodes:
       select is connected.
 
   Optional properties:
-    - nand-ecc-step-size: see nand.txt for details.
+    - nand-ecc-step-size: see nand-controller.yaml for details.
       If present, the value must be
         512        for "altr,socfpga-denali-nand"
         1024       for "socionext,uniphier-denali-nand-v5a"
         1024       for "socionext,uniphier-denali-nand-v5b"
-    - nand-ecc-strength: see nand.txt for details. Valid values are:
+    - nand-ecc-strength: see nand-controller.yaml for details. Valid values are:
         8, 15      for "altr,socfpga-denali-nand"
         8, 16, 24  for "socionext,uniphier-denali-nand-v5a"
         8, 16      for "socionext,uniphier-denali-nand-v5b"
-    - nand-ecc-maximize: see nand.txt for details
+    - nand-ecc-maximize: see nand-controller.yaml for details
 
 The chip nodes may optionally contain sub-nodes describing partitions of the
 address space. See partition.txt for more detail.

diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
@@ -30,9 +30,9 @@ Optional properties:
                  command is asserted. Zero means one cycle, 255 means 256
                  cycles.
 - bank: default NAND bank to use (0-3 are valid, 0 is the default).
-- nand-ecc-mode      : see nand.txt
-- nand-ecc-strength  : see nand.txt
-- nand-ecc-step-size : see nand.txt
+- nand-ecc-mode      : see nand-controller.yaml
+- nand-ecc-strength  : see nand-controller.yaml
+- nand-ecc-step-size : see nand-controller.yaml
 
 Can support 1-bit HW ECC (default) or if stronger correction is required,
 software-based BCH.

diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -8,7 +8,7 @@ explained in a separate documents - please refer to
 Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
 
 For NAND specific properties such as ECC modes or bus width, please refer to
-Documentation/devicetree/bindings/mtd/nand.txt
+Documentation/devicetree/bindings/mtd/nand-controller.yaml
 
 
 Required properties:

diff --git a/Documentation/devicetree/bindings/mtd/hisi504-nand.txt b/Documentation/devicetree/bindings/mtd/hisi504-nand.txt
@@ -7,7 +7,7 @@ Required properties:
                        NAND controller's registers. The second contains base
                        physical address and size of NAND controller's buffer.
 - interrupts:          Interrupt number for nfc.
-- nand-bus-width:      See nand.txt.
+- nand-bus-width:      See nand-controller.yaml.
 - nand-ecc-mode:       Support none and hw ecc mode.
 - #address-cells:      Partition address, should be set 1.
 - #size-cells:         Partition size, should be set 1.

diff --git a/Documentation/devicetree/bindings/mtd/marvell-nand.txt b/Documentation/devicetree/bindings/mtd/marvell-nand.txt
@@ -36,29 +36,29 @@ Children nodes represent the available NAND chips.
 
 Required properties:
 - reg: shall contain the native Chip Select ids (0-3).
-- nand-rb: see nand.txt (0-1).
+- nand-rb: see nand-controller.yaml (0-1).
 
 Optional properties:
 - marvell,nand-keep-config: orders the driver not to take the timings
   from the core and leaving them completely untouched. Bootloader
   timings will then be used.
 - label: MTD name.
-- nand-on-flash-bbt: see nand.txt.
-- nand-ecc-mode: see nand.txt. Will use hardware ECC if not specified.
-- nand-ecc-algo: see nand.txt. This property is essentially useful when
+- nand-on-flash-bbt: see nand-controller.yaml.
+- nand-ecc-mode: see nand-controller.yaml. Will use hardware ECC if not specified.
+- nand-ecc-algo: see nand-controller.yaml. This property is essentially useful when
   not using hardware ECC. Howerver, it may be added when using hardware
   ECC for clarification but will be ignored by the driver because ECC
   mode is chosen depending on the page size and the strength required by
   the NAND chip. This value may be overwritten with nand-ecc-strength
   property.
-- nand-ecc-strength: see nand.txt.
-- nand-ecc-step-size: see nand.txt. Marvell's NAND flash controller does
+- nand-ecc-strength: see nand-controller.yaml.
+- nand-ecc-step-size: see nand-controller.yaml. Marvell's NAND flash controller does
   use fixed strength (1-bit for Hamming, 16-bit for BCH), so the actual
   step size will shrink or grow in order to fit the required strength.
   Step sizes are not completely random for all and follow certain
   patterns described in AN-379, "Marvell SoC NFC ECC".
 
-See Documentation/devicetree/bindings/mtd/nand.txt for more details on
+See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on
 generic bindings.
 
 

diff --git a/Documentation/devicetree/bindings/mtd/mxc-nand.txt b/Documentation/devicetree/bindings/mtd/mxc-nand.txt
@@ -4,9 +4,9 @@ Required properties:
 - compatible: "fsl,imxXX-nand"
 - reg: address range of the nfc block
 - interrupts: irq to be used
-- nand-bus-width: see nand.txt
-- nand-ecc-mode: see nand.txt
-- nand-on-flash-bbt: see nand.txt
+- nand-bus-width: see nand-controller.yaml
+- nand-ecc-mode: see nand-controller.yaml
+- nand-on-flash-bbt: see nand-controller.yaml
 
 Example:
 

diff --git a/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt b/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt
@@ -26,14 +26,14 @@ Optional children node properties:
 		 "hw" is supported.
 - nand-ecc-algo: string, algorithm of NAND ECC.
 		 Supported values with "hw" ECC mode are: "rs", "bch".
-- nand-bus-width : See nand.txt
-- nand-on-flash-bbt: See nand.txt
+- nand-bus-width : See nand-controller.yaml
+- nand-on-flash-bbt: See nand-controller.yaml
 - nand-ecc-strength: integer representing the number of bits to correct
 		     per ECC step (always 512). Supported strength using HW ECC
 		     modes are:
 		     - RS: 4, 6, 8
 		     - BCH: 4, 8, 14, 16
-- nand-ecc-maximize: See nand.txt
+- nand-ecc-maximize: See nand-controller.yaml
 - nand-is-boot-medium: Makes sure only ECC strengths supported by the boot ROM
 		       are chosen.
 - wp-gpios: GPIO specifier for the write protect pin.

diff --git a/Documentation/devicetree/bindings/mtd/oxnas-nand.txt b/Documentation/devicetree/bindings/mtd/oxnas-nand.txt
@@ -1,6 +1,6 @@
 * Oxford Semiconductor OXNAS NAND Controller
 
-Please refer to nand.txt for generic information regarding MTD NAND bindings.
+Please refer to nand-controller.yaml for generic information regarding MTD NAND bindings.
 
 Required properties:
  - compatible: "oxsemi,ox820-nand"

diff --git a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
@@ -47,8 +47,8 @@ Required properties:
 - #size-cells:		see partition.txt
 
 Optional properties:
-- nand-bus-width:	see nand.txt
-- nand-ecc-strength:	see nand.txt. If not specified, then ECC strength will
+- nand-bus-width:	see nand-controller.yaml
+- nand-ecc-strength:	see nand-controller.yaml. If not specified, then ECC strength will
 			be used according to chip requirement and available
 			OOB size.
 

diff --git a/Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt b/Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt
@@ -6,16 +6,16 @@ Required properties:
 	"samsung,s3c2412-nand"
 	"samsung,s3c2440-nand"
 - reg : register's location and length.
-- #address-cells, #size-cells : see nand.txt
+- #address-cells, #size-cells : see nand-controller.yaml
 - clocks : phandle to the nand controller clock
 - clock-names : must contain "nand"
 
 Optional child nodes:
 Child nodes representing the available nand chips.
 
 Optional child properties:
-- nand-ecc-mode : see nand.txt
-- nand-on-flash-bbt : see nand.txt
+- nand-ecc-mode : see nand-controller.yaml
+- nand-on-flash-bbt : see nand-controller.yaml
 
 Each child device node may optionally contain a 'partitions' sub-node,
 which further contains sub-nodes describing the flash partition mapping.

diff --git a/Documentation/devicetree/bindings/mtd/stm32-fmc2-nand.txt b/Documentation/devicetree/bindings/mtd/stm32-fmc2-nand.txt
@@ -24,9 +24,9 @@ Required properties:
 - reg: describes the CS lines assigned to the NAND device.
 
 Optional properties:
-- nand-on-flash-bbt: see nand.txt
-- nand-ecc-strength: see nand.txt
-- nand-ecc-step-size: see nand.txt
+- nand-on-flash-bbt: see nand-controller.yaml
+- nand-ecc-strength: see nand-controller.yaml
+- nand-ecc-step-size: see nand-controller.yaml
 
 The following ECC strength and step size are currently supported:
  - nand-ecc-strength = <1>, nand-ecc-step-size = <512> (Hamming)

diff --git a/Documentation/devicetree/bindings/mtd/tango-nand.txt b/Documentation/devicetree/bindings/mtd/tango-nand.txt
@@ -11,7 +11,7 @@ Required properties:
 - #size-cells: <0>
 
 Children nodes represent the available NAND chips.
-See Documentation/devicetree/bindings/mtd/nand.txt for generic bindings.
+See Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings.
 
 Example:
 

diff --git a/Documentation/devicetree/bindings/mtd/vf610-nfc.txt b/Documentation/devicetree/bindings/mtd/vf610-nfc.txt
@@ -25,14 +25,14 @@ only handle one NAND chip.
 
 Required properties:
 - compatible: Should be set to "fsl,vf610-nfc-cs".
-- nand-bus-width: see nand.txt
-- nand-ecc-mode: see nand.txt
+- nand-bus-width: see nand-controller.yaml
+- nand-ecc-mode: see nand-controller.yaml
 
 Required properties for hardware ECC:
-- nand-ecc-strength: supported strengths are 24 and 32 bit (see nand.txt)
+- nand-ecc-strength: supported strengths are 24 and 32 bit (see nand-controller.yaml)
 - nand-ecc-step-size: step size equals page size, currently only 2k pages are
     supported
-- nand-on-flash-bbt: see nand.txt
+- nand-on-flash-bbt: see nand-controller.yaml
 
 Example: