Skip to content

Commit

Permalink
libata: skip SRST for all SIMG [34]7x port-multipliers
Browse files Browse the repository at this point in the history
commit 7a87718 upstream.

For some reason, a lot of port-multipliers have issues with softreset.
SIMG [34]7x series port-multipliers have been quite erratic in this
regard.  I recall that it was better with some firmware revisions and
the current list of quirks worked fine for a while.  I think it got
worse with later firmwares or maybe my test coverage wasn't good
enough.  Anyways, HPA is reporting that his 3726 setup suffers SRST
failures and then the PMP gets confused and fails to probe the last
port.

The hope was that we try to stick to the standard as much as possible
and soonish the PMPs and their firmwares will improve in quality, so
the quirk list was kept to minimum.  Well, it seems like that's never
gonna happen.

Let's set NO_SRST for all [34]7x PMPs so that whatever remaining
userbase of the device suffer the least.  Maybe we should do the same
for 57xx's but unfortunately I don't have any device left to test and
I'm not even sure 57xx's have ever been made widely available, so
let's leave those alone for now.

Signed-off-by: Tejun Heo <[email protected]>
Reported-by: "H. Peter Anvin" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
  • Loading branch information
htejun authored and gregkh committed Jul 25, 2013
1 parent fe1ebd0 commit 64a03b5
Showing 1 changed file with 17 additions and 16 deletions.
33 changes: 17 additions & 16 deletions drivers/ata/libata-pmp.c
Original file line number Diff line number Diff line change
Expand Up @@ -389,30 +389,31 @@ static void sata_pmp_quirks(struct ata_port *ap)
/* link reports offline after LPM */
link->flags |= ATA_LFLAG_NO_LPM;

/* Class code report is unreliable. */
/*
* Class code report is unreliable and SRST times
* out under certain configurations.
*/
if (link->pmp < 5)
link->flags |= ATA_LFLAG_ASSUME_ATA;
link->flags |= ATA_LFLAG_NO_SRST |
ATA_LFLAG_ASSUME_ATA;

/* port 5 is for SEMB device and it doesn't like SRST */
if (link->pmp == 5)
link->flags |= ATA_LFLAG_NO_SRST |
ATA_LFLAG_ASSUME_SEMB;
}
} else if (vendor == 0x1095 && devid == 0x4723) {
/* sil4723 quirks */
ata_for_each_link(link, ap, EDGE) {
/* link reports offline after LPM */
link->flags |= ATA_LFLAG_NO_LPM;

/* class code report is unreliable */
if (link->pmp < 2)
link->flags |= ATA_LFLAG_ASSUME_ATA;

/* the config device at port 2 locks up on SRST */
if (link->pmp == 2)
link->flags |= ATA_LFLAG_NO_SRST |
ATA_LFLAG_ASSUME_ATA;
}
/*
* sil4723 quirks
*
* Link reports offline after LPM. Class code report is
* unreliable. SIMG PMPs never got SRST reliable and the
* config device at port 2 locks up on SRST.
*/
ata_for_each_link(link, ap, EDGE)
link->flags |= ATA_LFLAG_NO_LPM |
ATA_LFLAG_NO_SRST |
ATA_LFLAG_ASSUME_ATA;
} else if (vendor == 0x1095 && devid == 0x4726) {
/* sil4726 quirks */
ata_for_each_link(link, ap, EDGE) {
Expand Down

0 comments on commit 64a03b5

Please sign in to comment.