Ubuntu Release Version 20 to 24 Server Autoinstall

A script to generate a fully-automated ISO image for installing Ubuntu onto a machine without human interaction. This uses the new autoinstall method for Ubuntu and newer.

Ubuntu autoinstall process

Here are the detailed instructions:

Verify the user-data file: The installer first verifies the validity of the user-data file. If it fails, the installer jumps to the manual installation interface.
Parsing user-data configuration parameters: The installer parses the user-data file for autoinstall configurations, such as APT sources, network configurations, disk partitions, kernel, swap partitions, etc. The installer then parses the user-data file to determine if the user-data file is valid and if it is not, the installer jumps to the manual installation screen.
Installing the base system: the installer copies the selected operating system image to the target disk.
Install kernel and configure bootloader: The installer installs the kernel on the target system and configures it for the bootloader (e.g. GRUB).
Configure cloud-init: The installer adds the cloud-init configuration to the target system to be executed after the instance boots.
Install required packages: The installer installs some required packages, such as openssh-server and other custom packages that you specify in user-data.
Perform security updates: The installation process should include obtaining all critical security updates and applying them to the target system.
Instance Reboot: The installer reboots the instance to start the installed operating system.
Boot for the first time: Once the instance is booted, it will load and execute the configuration parameters based on the runmd command in user-data.

Requirements

Tested on a host running Ubuntu System

Utilities required:

xorriso
sed
curl
gpg
isolinux
p7zip-full
dpkg-dev

Note: When building autoinstall, make sure that your home machine is the same version as the ISO image you are building.

user-data define

Before building the image ISO, I strongly recommend that you do the following to avoid having to build the image more times.

Before defining the user-data file, you need to know what parameters are supported in the user-data file. ubuntu provides user-data-autoinstall-reference, I have also listed a more concise configuration template user-data-autoinstall, with detailed descriptions of each configuration parameter
user-data file is a yaml format configuration file, if you are not sure whether the format of the yaml file is correct, you can through the yaml file in the present validation tool yaml-validator to check, to ensure that there is no problem.

flavor and name mapping

We all know that each release version number of ubuntu will be mapped to a name, as follows.

Nubmer	Name
20.04.x	focal
22.04.x	jammy
24.04	noble

Basic Usage

root@john-desktop:~/ubuntu/ubuntu-autoinstall-generator-tools# ./ubuntu-autoinstall-generator-tools.sh -h
Usage: ubuntu-autoinstall-generator-tools.sh [-h] [-v] [-a] [-e] [-u user-data-file] [-m meta-data-file] [-p package-name] [-c config-data-file] [-t temaplate-config-file] [-s service-dir-name] [-j job-name] [-k] [-o] [-r] [-d destination-iso-file]

💁 This script will create fully-automated Ubuntu release version 20 to 24 installation media.

Available options:

-h, --help              Print this help and exit
-v, --verbose           Print script debug info
-a, --all-in-one        Bake user-data and meta-data into the generated ISO. By default you will
                        need to boot systems with a CIDATA volume attached containing your
                        autoinstall user-data and meta-data files.
                        For more information see: https://ubuntu.com/server/docs/install/autoinstall-quickstart
-e, --use-hwe-kernel    Force the generated ISO to boot using the hardware enablement (HWE) kernel. Not supported
                        by early Ubuntu 20.04 release ISOs.
-u, --user-data         Path to user-data file. Required if using -a
-n, --release-name      Specifies the code name to download the ISO image distribution, You must select any string
                        from the list as an argument. eg: focal, jammy, noble.
-m, --meta-data         Path to meta-data file. Will be an empty file if not specified and using -a
-p, --package-name      Bake he package-name downloaded installation into the generated ISO. if the package-name is empty，
                        no installation package will be downloaded. Path to package-name file. Required if using -a
-c, --config-data       Path to config-data file. Required if using -a
-t  --temaplate-config  Path to temaplate-config file. Required if using -a
-k, --no-verify         Disable GPG verification of the source ISO file. By default SHA256SUMS-$today and
                        SHA256SUMS-$today.gpg in ${script_dir} will be used to verify the authenticity and integrity
                        of the source ISO file. If they are not present the latest daily SHA256SUMS will be
                        downloaded and saved in ${script_dir}. The Ubuntu signing key will be downloaded and
                        saved in a new keyring in ${script_dir}
-o, --no-md5            Disable MD5 checksum on boot
-r, --use-release-iso   Use the current release ISO instead of the daily ISO. The file will be used if it already
                        exists.
-d, --destination       Destination ISO file. By default ${script_dir}/ubuntu-autoinstall-$today.iso will be
                        created, overwriting any existing file.
-s  --service-dir-name  Bake service-dir-name into the generated ISO. if service-dir-name is not specified, no local application
                        will be uploaded to complete the ISO build. Path to service-dir-name directory. Required if using -a
-j  --job-name         Bake job-name into the generated ISO. if job-name is not specified, there will be
                       no action to change after the service starts. Path to job-name file. Required if using -a

note: ISO image name convention format: IMAGE_NAME-autoinstall-RELEASE_ID.iso

Basic Example

root@john-desktop:~/ubuntu/ubuntu-autoinstall-generator-tools# ./ubuntu-autoinstall-generator-tools.sh -a  -u user-data -n jammy -d ubuntu-autoinstall-jammytest.iso      
[2022-12-14 01:03:12] 👶 Starting up...
[2022-12-14 01:03:12] 🔎 Checking for current release...
[2022-12-14 01:03:13] 💿 Current release is 22.04.1
[2022-12-14 01:03:14] 📁 Created temporary working directory /tmp/tmp.OYliQ5b0VL
[2022-12-14 01:03:14] 🔎 Checking for required utilities...
[2022-12-14 01:03:14] 👍 All required utilities are installed.
[2022-12-14 01:03:14] ☑️ Using existing /root/ubuntu20/ubuntu-autoinstall-generator-tools/ubuntu-22.04.1-live-server-amd64.iso file.
[2022-12-14 01:03:14] ☑️ Using existing SHA256SUMS-22.04.1 & SHA256SUMS-22.04.1.gpg files.
[2022-12-14 01:03:14] ☑️ Using existing Ubuntu signing key saved in /root/ubuntu20/ubuntu-autoinstall-generator-tools/843938DF228D22F7B3742BC0D94AA3F0EFE21092.keyring
[2022-12-14 01:03:14] 🔐 Verifying /root/ubuntu20/ubuntu-autoinstall-generator-tools/ubuntu-22.04.1-live-server-amd64.iso integrity and authenticity...
[2022-12-14 01:03:24] 👍 Verification succeeded.
[2022-12-14 01:03:24] 🔧 Extracting ISO image...
[2022-12-14 01:03:27] 👍 Extracted to /tmp/tmp.OYliQ5b0VL
[2022-12-14 01:16:23] 🧩 Adding autoinstall parameter to kernel command line...
[2022-12-14 01:16:23] 👍 Added parameter to UEFI and BIOS kernel command lines.
[2022-12-14 01:16:23] 🧩 Adding user-data and meta-data files...
[2022-12-14 01:16:23] 👍 Added data and configured kernel command line.
[2022-12-14 01:16:23] 👷 Updating /tmp/tmp.OYliQ5b0VL/md5sum.txt with hashes of modified files...
[2022-12-14 01:16:23] 👍 Updated hashes.
[2022-12-14 01:16:23] 📦 Repackaging extracted files into an ISO image...
[2022-12-14 01:16:38] 👍 Repackaged into /root/ubuntu/ubuntu-autoinstall-generator-tools/ubuntu-autoinstall-jammy.iso
[2022-12-14 01:16:38] ✅ Completed.
[2022-12-14 01:16:38] 🚽 Deleted temporary working directory /tmp/tmp.OYliQ5b0VL

Now you can boot your target machine using ubuntu-autoinstall-jammy.iso and it will automatically install Ubuntu using the configuration from user-data-example. Also, you can select the version you want to build with the required parameter -n.

Advanced Usage

Only download the installation package

There are two ways to download the installer.

when building the image, do not need to build the installation package into the build image, in the process of installing the image to rely on the Internet to download the installation package, in order to complete the auto-installation
when building the image, embed the required installation package into the build image, do not need to rely on the Internet in the process of installing the image to complete the automatic installation directly

The first way

You need to add the name of the package you want to download in the packages section of the user-data configuration file. for example:

#cloud-config
autoinstall:
  # ...
  packages:
      - bash-completion
      - wget
      - net-tools

Note: You need to make sure that the network section is reachable, if you are not sure whether the network configuration is reachable or not, you can configure network dhcp to automatically assign an address.

Finally, Same as using "Basic Example"

root@john-desktop:~/ubuntu/ubuntu-autoinstall-generator-tools# ./ubuntu-autoinstall-generator-tools.sh -a  -u user-data -n jammy -d ubuntu-autoinstall-jammytest.iso      
[2022-12-14 01:03:12] 👶 Starting up...
[2022-12-14 01:03:12] 🔎 Checking for current release...
[2022-12-14 01:03:13] 💿 Current release is 22.04.1
[2022-12-14 01:03:14] 📁 Created temporary working directory /tmp/tmp.OYliQ5b0VL
[2022-12-14 01:03:14] 🔎 Checking for required utilities...
[2022-12-14 01:03:14] 👍 All required utilities are installed.
[2022-12-14 01:03:14] ☑️ Using existing /root/ubuntu20/ubuntu-autoinstall-generator-tools/ubuntu-22.04.1-live-server-amd64.iso file.
[2022-12-14 01:03:14] ☑️ Using existing SHA256SUMS-22.04.1 & SHA256SUMS-22.04.1.gpg files.
[2022-12-14 01:03:14] ☑️ Using existing Ubuntu signing key saved in /root/ubuntu20/ubuntu-autoinstall-generator-tools/843938DF228D22F7B3742BC0D94AA3F0EFE21092.keyring
[2022-12-14 01:03:14] 🔐 Verifying /root/ubuntu20/ubuntu-autoinstall-generator-tools/ubuntu-22.04.1-live-server-amd64.iso integrity and authenticity...
[2022-12-14 01:03:24] 👍 Verification succeeded.
[2022-12-14 01:03:24] 🔧 Extracting ISO image...
[2022-12-14 01:03:27] 👍 Extracted to /tmp/tmp.OYliQ5b0VL
[2022-12-14 01:16:23] 🧩 Adding autoinstall parameter to kernel command line...
[2022-12-14 01:16:23] 👍 Added parameter to UEFI and BIOS kernel command lines.
[2022-12-14 01:16:23] 🧩 Adding user-data and meta-data files...
[2022-12-14 01:16:23] 👍 Added data and configured kernel command line.
[2022-12-14 01:16:23] 👷 Updating /tmp/tmp.OYliQ5b0VL/md5sum.txt with hashes of modified files...
[2022-12-14 01:16:23] 👍 Updated hashes.
[2022-12-14 01:16:23] 📦 Repackaging extracted files into an ISO image...
[2022-12-14 01:16:38] 👍 Repackaged into /root/ubuntu/ubuntu-autoinstall-generator-tools/ubuntu-autoinstall-jammy.iso
[2022-12-14 01:16:38] ✅ Completed.
[2022-12-14 01:16:38] 🚽 Deleted temporary working directory /tmp/tmp.OYliQ5b0VL

The second way

When you just download the installation package from the Internet, you do not have to modify the configuration file of the installation package, just specify -p

Example

first，you shoule be configure the package-name.txt of the installation packages names, for example:

# Define the name of the package to be downloaded from the Internet
 net-tools
mariadb-server
gcc
keepalived
samba samba-common

Note: If you use the -p parameter, the following parameters are dynamically injected into the late-commands configure section, without human intervention.

#cloud-config
autoinstall:
  # ...
  late-commands:
    - cp -rp /cdrom/mnt /target/
    - chmod +x /target/mnt/script/install-pkgs.sh
    - curtin in-target --target=/target -- /mnt/script/install-pkgs.sh

Finally, you need to specify on the command line the package-name.txt that you want to download the installer from, with the -p parameter.

root@john-desktop:~/ubuntu/ubuntu-autoinstall-generator-tools# ./ubuntu-autoinstall-generator-tools.sh -a  -u user-data -n jammy -p package-name.txt -d ubuntu-autoinstall-jammytest.iso      
[2022-12-14 01:03:12] 👶 Starting up...
[2022-12-14 01:03:12] 🔎 Checking for current release...
[2022-12-14 01:03:13] 💿 Current release is 22.04.1
[2022-12-14 01:03:14] 📁 Created temporary working directory /tmp/tmp.OYliQ5b0VL
[2022-12-14 01:03:14] 🔎 Checking for required utilities...
[2022-12-14 01:03:14] 👍 All required utilities are installed.
[2022-12-14 01:03:14] ☑️ Using existing /root/ubuntu20/ubuntu-autoinstall-generator-tools/ubuntu-22.04.1-live-server-amd64.iso file.
[2022-12-14 01:03:14] ☑️ Using existing SHA256SUMS-22.04.1 & SHA256SUMS-22.04.1.gpg files.
[2022-12-14 01:03:14] ☑️ Using existing Ubuntu signing key saved in /root/ubuntu20/ubuntu-autoinstall-generator-tools/843938DF228D22F7B3742BC0D94AA3F0EFE21092.keyring
[2022-12-14 01:03:14] 🔐 Verifying /root/ubuntu20/ubuntu-autoinstall-generator-tools/ubuntu-22.04.1-live-server-amd64.iso integrity and authenticity...
[2022-12-14 01:03:24] 👍 Verification succeeded.
[2022-12-14 01:03:24] 🔧 Extracting ISO image...
[2022-12-14 01:03:27] 👍 Extracted to /tmp/tmp.OYliQ5b0VL
[2022-12-14 01:03:27] 🌎 Downloading and saving packages tcpdump
[2022-12-14 01:04:48] 🌎 Downloading and saving packages net-tools
[2022-12-14 01:04:51] 🌎 Downloading and saving packages gcc
[2022-12-14 01:10:52] 🌎 Downloading and saving packages mysql-server
[2022-12-14 01:16:23] 👍 Downloaded packages and saved to /tmp/tmp.OYliQ5b0VL/mnt/pkgs
[2022-12-14 01:16:23] 🧩 Adding autoinstall parameter to kernel command line...
[2022-12-14 01:16:23] 👍 Added parameter to UEFI and BIOS kernel command lines.
[2022-12-14 01:16:23] 🧩 Adding user-data and meta-data files...
[2022-12-14 01:16:23] 👍 Added data and configured kernel command line.
[2022-12-14 01:16:23] 👷 Updating /tmp/tmp.OYliQ5b0VL/md5sum.txt with hashes of modified files...
[2022-12-14 01:16:23] 👍 Updated hashes.
[2022-12-14 01:16:23] 📦 Repackaging extracted files into an ISO image...
[2022-12-14 01:16:38] 👍 Repackaged into /root/ubuntu/ubuntu-autoinstall-generator-tools/ubuntu-autoinstall-jammy.iso
[2022-12-14 01:16:38] ✅ Completed.
[2022-12-14 01:16:38] 🚽 Deleted temporary working directory /tmp/tmp.OYliQ5b0VL

Download the installation package, and modify it before the APP Service is started.

When you specify -p in your script to download the dependencies from the Internet, If you want to change the default values of the configuration file through a template or command before starting the service.

Example

The following is an example of a mysql config file change, Three flexible methods are provided here, choose any one of them.

1. You can modify the configuration file by using the linux command, for example:

You can modify the parameters of the configuration file directly with the linux command in the late-command configuration section of user-dat, for example: Note: Except for the sed command line, which can be changed, other commands are not allowed.

#cloud-config
autoinstall:
  # ...
  late-commands:
    - cp -rp /cdrom/mnt /target/
    - chmod +x /target/mnt/script/install-pkgs.sh
    - curtin in-target --target=/target -- /mnt/script/install-pkgs.sh
    # modfiy mysql parameters of the configruation， as the following:
    - sed -i '/^bind-address/c\port = 13306' /target/etc/mysql/mariadb.conf.d/50-server.cnf
    - sed -i '/^#key_buffer_size/c\key_buffer_size = 128M' /target/etc/mysql/mariadb.conf.d/50-server.cnf

Finally, you need to specify on the command line the package-name.txt that you want to download the installer from, with the -p parameter.

root@john-desktop:~/ubuntu/ubuntu-autoinstall-generator-tools# ./ubuntu-autoinstall-generator-tools.sh -a  -u user-data -n jammy -p package-name.txt -d ubuntu-autoinstall-jammytest.iso      
[2022-12-14 01:03:12] 👶 Starting up...
[2022-12-14 01:03:12] 🔎 Checking for current release...
[2022-12-14 01:03:13] 💿 Current release is 22.04.1
[2022-12-14 01:03:14] 📁 Created temporary working directory /tmp/tmp.OYliQ5b0VL
[2022-12-14 01:03:14] 🔎 Checking for required utilities...
[2022-12-14 01:03:14] 👍 All required utilities are installed.
[2022-12-14 01:03:14] ☑️ Using existing /root/ubuntu20/ubuntu-autoinstall-generator-tools/ubuntu-22.04.1-live-server-amd64.iso file.
[2022-12-14 01:03:14] ☑️ Using existing SHA256SUMS-22.04.1 & SHA256SUMS-22.04.1.gpg files.
[2022-12-14 01:03:14] ☑️ Using existing Ubuntu signing key saved in /root/ubuntu20/ubuntu-autoinstall-generator-tools/843938DF228D22F7B3742BC0D94AA3F0EFE21092.keyring
[2022-12-14 01:03:14] 🔐 Verifying /root/ubuntu20/ubuntu-autoinstall-generator-tools/ubuntu-22.04.1-live-server-amd64.iso integrity and authenticity...
[2022-12-14 01:03:24] 👍 Verification succeeded.
[2022-12-14 01:03:24] 🔧 Extracting ISO image...
[2022-12-14 01:03:27] 👍 Extracted to /tmp/tmp.OYliQ5b0VL
[2022-12-14 01:03:27] 🌎 Downloading and saving packages tcpdump
[2022-12-14 01:04:48] 🌎 Downloading and saving packages net-tools
[2022-12-14 01:04:51] 🌎 Downloading and saving packages gcc
[2022-12-14 01:10:52] 🌎 Downloading and saving packages mysql-server
[2022-12-14 01:16:23] 👍 Downloaded packages and saved to /tmp/tmp.OYliQ5b0VL/mnt/pkgs
[2022-12-14 01:16:23] 🧩 Adding autoinstall parameter to kernel command line...
[2022-12-14 01:16:23] 👍 Added parameter to UEFI and BIOS kernel command lines.
[2022-12-14 01:16:23] 🧩 Adding user-data and meta-data files...
[2022-12-14 01:16:23] 👍 Added data and configured kernel command line.
[2022-12-14 01:16:23] 👷 Updating /tmp/tmp.OYliQ5b0VL/md5sum.txt with hashes of modified files...
[2022-12-14 01:16:23] 👍 Updated hashes.
[2022-12-14 01:16:23] 📦 Repackaging extracted files into an ISO image...
[2022-12-14 01:16:38] 👍 Repackaged into /root/ubuntu/ubuntu-autoinstall-generator-tools/ubuntu-autoinstall-jammy.iso
[2022-12-14 01:16:38] ✅ Completed.
[2022-12-14 01:16:38] 🚽 Deleted temporary working directory /tmp/tmp.OYliQ5b0VL

2. You can modify the configration file by useing the shell script, use the following methods (recommend)

You should custom configure the config.sh script, and then reference it in the late-command, for example:

#!/bin/bash
#
sed -i '/^bind-address/c\port = 13306' /etc/mysql/mariadb.conf.d/50-server.cnf
sed -i '/^#key_buffer_size/c\key_buffer_size = 128M' /etc/mysql/mariadb.conf.d/50-server.cnf
sed -i '/^#max_allowed_packet/c\max_allowed_packet = 1G' /etc/mysql/mariadb.conf.d/50-server.cnf
sed -i '/^#thread_stack/c\thread_stack = 512K' /etc/mysql/mariadb.conf.d/50-server.cnf
sed -i '/^#thread_cache_size/c\thread_cache_size = 16' /etc/mysql/mariadb.conf.d/50-server.cnf

Note: If you use the -c parameter, the following parameters are dynamically injected into the late-commands configure section, without human intervention.

#cloud-config
autoinstall:
  # ...
  late-commands:
    - cp -rp /cdrom/mnt /target/
    - chmod +x /target/mnt/script/install-pkgs.sh
    - curtin in-target --target=/target -- /mnt/script/install-pkgs.sh
    - chmod +x /target/mnt/script/config.sh
    - curtin in-target --target=/target -- /mnt/script/config.sh

Finally, you need to specify on the command line the package-name.txt that you want to download the installer from, with the -p parameter, And you also have to specify the configuration file with -c

root@john-desktop:~/ubuntu/ubuntu-autoinstall-generator-tools# ./ubuntu-autoinstall-generator-tools.sh -a  -u user-data -n jammy -p package-name.txt -c config.sh -d ubuntu-autoinstall-jammytest.iso      
[2022-12-14 01:03:12] 👶 Starting up...
[2022-12-14 01:03:12] 🔎 Checking for current release...
[2022-12-14 01:03:13] 💿 Current release is 22.04.1
[2022-12-14 01:03:14] 📁 Created temporary working directory /tmp/tmp.OYliQ5b0VL
[2022-12-14 01:03:14] 🔎 Checking for required utilities...
[2022-12-14 01:03:14] 👍 All required utilities are installed.
[2022-12-14 01:03:14] ☑️ Using existing /root/ubuntu20/ubuntu-autoinstall-generator-tools/ubuntu-22.04.1-live-server-amd64.iso file.
[2022-12-14 01:03:14] ☑️ Using existing SHA256SUMS-22.04.1 & SHA256SUMS-22.04.1.gpg files.
[2022-12-14 01:03:14] ☑️ Using existing Ubuntu signing key saved in /root/ubuntu20/ubuntu-autoinstall-generator-tools/843938DF228D22F7B3742BC0D94AA3F0EFE21092.keyring
[2022-12-14 01:03:14] 🔐 Verifying /root/ubuntu20/ubuntu-autoinstall-generator-tools/ubuntu-22.04.1-live-server-amd64.iso integrity and authenticity...
[2022-12-14 01:03:24] 👍 Verification succeeded.
[2022-12-14 01:03:24] 🔧 Extracting ISO image...
[2022-12-14 01:03:27] 👍 Extracted to /tmp/tmp.OYliQ5b0VL
[2022-12-14 01:03:27] 🌎 Downloading and saving packages tcpdump
[2022-12-14 01:04:48] 🌎 Downloading and saving packages net-tools
[2022-12-14 01:04:51] 🌎 Downloading and saving packages gcc
[2022-12-14 01:10:52] 🌎 Downloading and saving packages mysql-server
[2022-12-14 01:16:23] 👍 Downloaded packages and saved to /tmp/tmp.OYliQ5b0VL/mnt/pkgs
[2022-12-14 01:16:23] 🧩 Adding autoinstall parameter to kernel command line...
[2022-12-14 01:16:23] 👍 Added parameter to UEFI and BIOS kernel command lines.
[2022-12-14 01:16:23] 🧩 Adding user-data and meta-data files...
[2022-12-14 01:16:23] 👍 Added data and configured kernel command line.
[2022-12-14 01:16:23] 👷 Updating /tmp/tmp.OYliQ5b0VL/md5sum.txt with hashes of modified files...
[2022-12-14 01:16:23] 👍 Updated hashes.
[2022-12-14 01:16:23] 📦 Repackaging extracted files into an ISO image...
[2022-12-14 01:16:38] 👍 Repackaged into /root/ubuntu/ubuntu-autoinstall-generator-tools/ubuntu-autoinstall-jammy.iso
[2022-12-14 01:16:38] ✅ Completed.
[2022-12-14 01:16:38] 🚽 Deleted temporary working directory /tmp/tmp.OYliQ5b0VL

3. You can modify the configration file by using the template file

You need to make a copy of the template configuration file beforehand, and modify it to your desired state, and then reference it in the late-command, for example:

Here I am using the database template file is template.conf， Not in the specific display content

Note: Except for the source and destination configuration files of the template file, which can be changed, nothing else is allowed

#cloud-config
autoinstall:
  # ...
  late-commands:    
    - cp -rp /cdrom/mnt /target/
    - chmod +x /target/mnt/script/install-pkgs.sh
    - curtin in-target --target=/target -- /mnt/script/install-pkgs.sh
    - curtin in-target --target=/target -- cp /mnt/template.conf /etc/mysql/mariadb.conf.d/50-server.cnf
   #- curtin in-target --target=/target -- cp /mnt/template.conf /etc/nginx/config.d/app.conf

Finally, you need to specify on the command line the package-name.txt that you want to download the installer from, with the -p parameter, And you also have to specify the template file with -t

root@john-desktop:~/ubuntu/ubuntu-autoinstall-generator-tools# ./ubuntu-autoinstall-generator-tools.sh -a  -u user-data -n jammy -p package-name.txt -t template.conf -d ubuntu-autoinstall-jammytest.iso      
[2022-12-14 01:03:12] 👶 Starting up...
[2022-12-14 01:03:12] 🔎 Checking for current release...
[2022-12-14 01:03:13] 💿 Current release is 22.04.1
[2022-12-14 01:03:14] 📁 Created temporary working directory /tmp/tmp.OYliQ5b0VL
[2022-12-14 01:03:14] 🔎 Checking for required utilities...
[2022-12-14 01:03:14] 👍 All required utilities are installed.
[2022-12-14 01:03:14] ☑️ Using existing /root/ubuntu20/ubuntu-autoinstall-generator-tools/ubuntu-22.04.1-live-server-amd64.iso file.
[2022-12-14 01:03:14] ☑️ Using existing SHA256SUMS-22.04.1 & SHA256SUMS-22.04.1.gpg files.
[2022-12-14 01:03:14] ☑️ Using existing Ubuntu signing key saved in /root/ubuntu20/ubuntu-autoinstall-generator-tools/843938DF228D22F7B3742BC0D94AA3F0EFE21092.keyring
[2022-12-14 01:03:14] 🔐 Verifying /root/ubuntu20/ubuntu-autoinstall-generator-tools/ubuntu-22.04.1-live-server-amd64.iso integrity and authenticity...
[2022-12-14 01:03:24] 👍 Verification succeeded.
[2022-12-14 01:03:24] 🔧 Extracting ISO image...
[2022-12-14 01:03:27] 👍 Extracted to /tmp/tmp.OYliQ5b0VL
[2022-12-14 01:03:27] 🌎 Downloading and saving packages tcpdump
[2022-12-14 01:04:48] 🌎 Downloading and saving packages net-tools
[2022-12-14 01:04:51] 🌎 Downloading and saving packages gcc
[2022-12-14 01:10:52] 🌎 Downloading and saving packages mysql-server
[2022-12-14 01:16:23] 👍 Downloaded packages and saved to /tmp/tmp.OYliQ5b0VL/mnt/pkgs
[2022-12-14 01:16:23] 🧩 Adding autoinstall parameter to kernel command line...
[2022-12-14 01:16:23] 👍 Added parameter to UEFI and BIOS kernel command lines.
[2022-12-14 01:16:23] 🧩 Adding user-data and meta-data files...
[2022-12-14 01:16:23] 👍 Added data and configured kernel command line.
[2022-12-14 01:16:23] 👷 Updating /tmp/tmp.OYliQ5b0VL/md5sum.txt with hashes of modified files...
[2022-12-14 01:16:23] 👍 Updated hashes.
[2022-12-14 01:16:23] 📦 Repackaging extracted files into an ISO image...
[2022-12-14 01:16:38] 👍 Repackaged into /root/ubuntu/ubuntu-autoinstall-generator-tools/ubuntu-autoinstall-jammy.iso
[2022-12-14 01:16:38] ✅ Completed.
[2022-12-14 01:16:38] 🚽 Deleted temporary working directory /tmp/tmp.OYliQ5b0VL

Download the installation package, and modify it after the APP Service is started.

cloud-init provides the runmd parameter to run commands or scripts during the first boot, and you can add your own customized script file with the -j option to make this a one-time task. This is a good approach if you downloaded the installer from the Internet and need to make changes after the image is installed and the service is running after a reboot.

Example

The following is an example of a mysql password change, script file modfiy-db-password.sh.

#!/bin/bash

# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.

# the following functions are used for logging purposes and are not recommended to be modified
# set extraiable value
DATE=`date "+%Y-%m-%d %H:%M:%S"`
USER=`whoami`
HOST_NAME=`hostname`
LOG_FILE="/var/log/record-db.log"

# Execution successful log printing path
function log_info () {
    echo "${DATE} ${HOST_NAME} ${USER} execute $0 [INFO] $@" >> ${LOG_FILE}
}

# Execution successful ⚠️ warning log print path
function log_warn () {
    echo "${DATE} ${HOST_NAME} ${USER} execute $0 [WARN] $@" >> ${LOG_FILE}
}

# Execution failure log print path
function log_error () {
    echo -e "\033[41;37m ${DATE} ${HOST_NAME} ${USER} execute $0 [ERROR] $@ \033[0m"  >> ${LOG_FILE}
}

function fn_log ()  {
    if [  $? -eq 0  ]
    then
            log_info "👍 $@ sucessed."
            echo -e "\033[32m $@ sucessed. \033[0m"
    else
            log_error "👿 $@ failed."
            echo -e "\033[41;37m $@ failed. \033[0m"
            exit 1
    fi
}

# this is an example of password mysql change
mysql_user="root"
# default password is null
mysql_password="123456"
new_mysql_password="Mspx@2001"
while true; do
    processNum=`ps aux | grep mysql | grep -v grep | wc -l`;
    # change mysql password
    if [ $processNum -ne 0 ]; then
      log_info "waiting for 2s"
      sleep 2
      # importing database tables
      sudo mysql -u${mysql_user} -p${mysql_password}  << EOF
      GRANT ALL ON *.* TO 'root'@'%' IDENTIFIED BY "${new_mysql_password}" WITH GRANT OPTION;
      GRANT ALL ON *.* TO 'root'@'127.0.0.1' IDENTIFIED BY "${new_mysql_password}" WITH GRANT OPTION;
      GRANT ALL ON *.* TO 'root'@'localhost' IDENTIFIED BY "${new_mysql_password}" WITH GRANT OPTION;
      FLUSH PRIVILEGES;
      COMMIT;
EOF
      fn_log "Update mysql password"
      break
    else
      sleep 2
      log_info "waiting for 2s"
    fi
done
exit 0

Note: If you use the -j parameter, the following parameters are dynamically injected into the late-commands and user-data configuration section, without human intervention. exclude packages configuration section.

#cloud-config
autoinstall:
  # ...
  # custom installation packges
  packages:
    - bash-completion
    - wget
    - net-tools
    - mariadb-server
  #  dynamically injected into user-data file
  late-commands:
    - cp /cdrom/runcmd-first-boot.sh /target/opt/runcmd-first-boot.sh
    - chmod +x /target/opt/runcmd-first-boot.sh
  user-data:
    runcmd:
      - /opt/runcmd-first-boot.sh

Finally, you need to specfiy the file name of the one-time task modfiy-db-password.sh on the command line, via the -j parameter

root@john-desktop:~/ubuntu20/ubuntu-autoinstall-generator-tools# ./ubuntu-autoinstall-generator-tools.sh -a  -u user-data -n jammy -j modfiy-db-password.sh -d ubuntu-autoinstall-jammytest.iso  
[2022-12-16 09:46:19] 👶 Starting up...
[2022-12-16 09:46:19] 🔎 Checking for current release...
[2022-12-16 09:46:21] 💿 Current release is 22.04.1
[2022-12-16 09:46:21] 📁 Created temporary working directory /tmp/tmp.tRYNYKdmxv
[2022-12-16 09:46:21] 🔎 Checking for required utilities...
[2022-12-16 09:46:21] 👍 All required utilities are installed.
[2022-12-16 09:46:21] ☑️ Using existing /root/ubuntu20/ubuntu-autoinstall-generator-tools/ubuntu-22.04.1-live-server-amd64.iso file.
[2022-12-16 09:46:21] ☑️ Using existing SHA256SUMS-22.04.1 & SHA256SUMS-22.04.1.gpg files.
[2022-12-16 09:46:21] ☑️ Using existing Ubuntu signing key saved in /root/ubuntu20/ubuntu-autoinstall-generator-tools/843938DF228D22F7B3742BC0D94AA3F0EFE21092.keyring
[2022-12-16 09:46:21] 🔐 Verifying /root/ubuntu20/ubuntu-autoinstall-generator-tools/ubuntu-22.04.1-live-server-amd64.iso integrity and authenticity...
[2022-12-16 09:46:31] 👍 Verification succeeded.
[2022-12-16 09:46:31] 🔧 Extracting ISO image...
[2022-12-16 09:46:38] 👍 Extracted to /tmp/tmp.tRYNYKdmxv
[2022-12-16 09:51:21] 👍 Downloaded packages and saved to /tmp/tmp.tRYNYKdmxv/mnt/pkgs
[2022-12-16 09:51:21] 📁 Moving rc.local file to temporary working directory /tmp/tmp.tRYNYKdmxv.
[2022-12-16 09:51:21] 🧩 Adding autoinstall parameter to kernel command line...
[2022-12-16 09:51:21] 👍 Added parameter to UEFI and BIOS kernel command lines.
[2022-12-16 09:51:21] 🧩 Adding user-data and meta-data files...
[2022-12-16 09:51:21] 👍 Added data and configured kernel command line.
[2022-12-16 09:51:21] 👷 Updating /tmp/tmp.tRYNYKdmxv/md5sum.txt with hashes of modified files...
[2022-12-16 09:51:21] 👍 Updated hashes.
[2022-12-16 09:51:21] 📦 Repackaging extracted files into an ISO image...
[2022-12-16 09:51:38] 👍 Repackaged into /root/ubuntu20/ubuntu-autoinstall-generator-tools/ubuntu-autoinstall-jammytest.iso
[2022-12-16 09:51:38] ✅ Completed.
[2022-12-16 09:51:38] 🚽 Deleted temporary working directory /tmp/tmp.OYliQ5b0VL

Define your own local installer upload build ISO.

If you need to build a local application into the ISO image, you need to specify the -s parameter to provide the directory.

Example

The following is an example of local application

First, let's look at the service directory structure

root@john-desktop:~# tree service/
service/
├── app      # binary file
├── app.service
└── config
      └── config.ini

1 directory, 3 files
root@john-desktop:~#

Customize the app.service file as follows:

[Unit]
Description=Application Service Programs
After=network.target

[Service]
Type=simple
WorkingDirectory=/opt/service/
ExecStart=/opt/service/app
Restart=always

[Install]
WantedBy=multi-user.target

Then you also need to add the following parameter to the late-command configuration field in user-data, for example:

Note: If you use the -s parameter, the following parameters are dynamically injected into the late-commands configuration section, without human intervention.

#cloud-config
autoinstall:
  # ...
  late-commands:
    - cp -rp /cdrom/mnt/service /target/opt
    - cp /cdrom/mnt/service/app.service /target/lib/systemd/system/app.service
    - curtin in-target --target=/target -- ln -sn /lib/systemd/system/app.service /etc/systemd/system/multi-user.target.wants/app.service

Finally, You need to specify the app directory of the local application, specified by the -s parameter, The commands are as follows:

root@john-desktop:~/ubuntu/ubuntu-autoinstall-generator-tools# ./ubuntu-autoinstall-generator-tools.sh -a  -u user-data -n jammy  -p  package-name.txt -j rc.local  -s /root/service -d ubuntu-autoinstall-jammytest.iso             
[2022-12-16 10:43:27] 👶 Starting up...
[2022-12-16 10:43:27] 🔎 Checking for current release...
[2022-12-16 10:43:29] 💿 Current release is 22.04.1
[2022-12-16 10:43:29] 📁 Created temporary working directory /tmp/tmp.X12RSWTKVK
[2022-12-16 10:43:29] 🔎 Checking for required utilities...
[2022-12-16 10:43:29] 👍 All required utilities are installed.
[2022-12-16 10:43:29] ☑️ Using existing /root/ubuntu20/ubuntu-autoinstall-generator-tools/ubuntu-22.04.1-live-server-amd64.iso file.
[2022-12-16 10:43:29] ☑️ Using existing SHA256SUMS-22.04.1 & SHA256SUMS-22.04.1.gpg files.
[2022-12-16 10:43:29] ☑️ Using existing Ubuntu signing key saved in /root/ubuntu20/ubuntu-autoinstall-generator-tools/843938DF228D22F7B3742BC0D94AA3F0EFE21092.keyring
[2022-12-16 10:43:29] 🔐 Verifying /root/ubuntu20/ubuntu-autoinstall-generator-tools/ubuntu-22.04.1-live-server-amd64.iso integrity and authenticity...
[2022-12-16 10:43:39] 👍 Verification succeeded.
[2022-12-16 10:43:39] 🔧 Extracting ISO image...
[2022-12-16 10:43:49] 👍 Extracted to /tmp/tmp.X12RSWTKVK
[2022-12-16 10:43:49] 🌎 Downloading and saving packages net-tools
[2022-12-16 10:43:55] 🌎 Downloading and saving packages keepalived
[2022-12-16 10:44:15] 🌎 Downloading and saving packages nginx
[2022-12-16 10:44:48] 🌎 Downloading and saving packages mariadb-server
[2022-12-16 10:45:05] 🌎 Downloading and saving packages mariadb-client
[2022-12-16 10:45:07] 🚽 Deleted temporary file /tmp/tmp.X12RSWTKVK/package-name.txt.
[2022-12-16 10:45:07] 👍 Downloaded packages and saved to /tmp/tmp.X12RSWTKVK/extra/pkgs
[2022-12-16 10:45:07] 📁 Moving rc.local file to temporary working directory /tmp/tmp.X12RSWTKVK/mnt/script.
[2022-12-16 10:45:07] 📁 Moving /root/tmp directory to temporary working directory /tmp/tmp.X12RSWTKVK/mnt/ 
[2022-12-16 10:45:07] 🧩 Adding autoinstall parameter to kernel command line...
[2022-12-16 10:45:07] 👍 Added parameter to UEFI and BIOS kernel command lines.
[2022-12-16 10:45:07] 🧩 Adding user-data and meta-data files...
[2022-12-16 10:45:07] 👍 Added data and configured kernel command line.
[2022-12-16 10:45:07] 👷 Updating /tmp/tmp.X12RSWTKVK/md5sum.txt with hashes of modified files...
[2022-12-16 10:45:07] 👍 Updated hashes.
[2022-12-16 10:45:07] 📦 Repackaging extracted files into an ISO image...
[2022-12-16 10:45:23] 👍 Repackaged into /root/ubuntu20/ubuntu-autoinstall-generator-tools/ubuntu-autoinstall-jammytest.iso
[2022-12-16 10:45:23] ✅ Completed.
[2022-12-16 10:45:23] 🚽 Deleted temporary working directory /tmp/tmp.OYliQ5b0VL

Thanks

The tool was created with reference to a large number of articles, including: ubuntu-jammy-netinstall-pxe,ubuntu-autoinstall-generator, ubuntu-desktop-22.04-autoinstall,ubuntu 22.04 autoinstall,curtin.readthedocs.io, The script ubuntu-autoinstall-generator is based on the version control, and some parameters optimization, thanks to the developer's open source contribution.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Ubuntu Release Version 20 to 24 Server Autoinstall

Ubuntu autoinstall process

Requirements

user-data define

flavor and name mapping

Basic Usage

Basic Example

Advanced Usage

Only download the installation package

The first way

The second way

Example

Download the installation package, and modify it before the APP Service is started.

Example

1. You can modify the configuration file by using the linux command, for example:

2. You can modify the configration file by useing the shell script, use the following methods (recommend)

3. You can modify the configration file by using the template file

Download the installation package, and modify it after the APP Service is started.

Example

Define your own local installer upload build ISO.

Example

Thanks

About

Releases

Packages

Languages

Name		Name	Last commit message	Last commit date
Latest commit History 50 Commits
.idea		.idea
cloud-init		cloud-init
example		example
template		template
LICENSE		LICENSE
README.md		README.md
build-image.sh		build-image.sh
meta-data		meta-data
package-name.txt		package-name.txt
ubuntu-autoinstall-generator-tools.sh		ubuntu-autoinstall-generator-tools.sh

License

skillixx66/ubuntu-autoinstall-generator-tools

Folders and files

Latest commit

History

Repository files navigation

Ubuntu Release Version 20 to 24 Server Autoinstall

Ubuntu autoinstall process

Requirements

user-data define

flavor and name mapping

Basic Usage

Basic Example

Advanced Usage

Only download the installation package

The first way

The second way

Example

Download the installation package, and modify it before the APP Service is started.

Example

1. You can modify the configuration file by using the linux command, for example:

2. You can modify the configration file by useing the shell script, use the following methods (recommend)

3. You can modify the configration file by using the template file

Download the installation package, and modify it after the APP Service is started.

Example

Define your own local installer upload build ISO.

Example

Thanks

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages