mmc: dt: Add reg/interrupts to mmc.txt for clarity.

Even though these aren't parsed by the MMC driver, make clear that they're required by the OF core. (Also, a few typo fixes.) Signed-off-by: Chris Ball <[email protected]>
skynet · Jul 11, 2012 · ed3efc1 · ed3efc1
1 parent 4efafee
commit ed3efc1
Showing 1 changed file with 7 additions and 3 deletions.
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -2,13 +2,17 @@ These properties are common to multiple MMC host controllers. Any host
 that requires the respective functionality should implement them using
 these definitions.
 
+Interpreted by the OF core:
+- reg: Registers location and length.
+- interrupts: Interrupts used by the MMC controller.
+
 Required properties:
 - bus-width: Number of data lines, can be <1>, <4>, or <8>
 
 Optional properties:
-- cd-gpios : Specify GPIOs for card detection, see gpio binding
-- wp-gpios : Specify GPIOs for write protection, see gpio binding
-- cd-inverted: when present, polarity on the wp gpio line is inverted
+- cd-gpios: Specify GPIOs for card detection, see gpio binding
+- wp-gpios: Specify GPIOs for write protection, see gpio binding
+- cd-inverted: when present, polarity on the cd gpio line is inverted
 - wp-inverted: when present, polarity on the wp gpio line is inverted
 - non-removable: non-removable slot (like eMMC)
 - max-frequency: maximum operating clock frequency