Merge branch 'master' into mm-stable

Documentation/ABI/stable/sysfs-driver-speakup

@@ -35,6 +35,15 @@ Description:	This controls cursor delay when using arrow keys. When a
 		characters. Set this to a higher value to adjust for the delay
 		and better synchronisation between cursor position and speech.
 
+What:		/sys/accessibility/speakup/cur_phonetic
+KernelVersion:	6.2
+Contact:	[email protected]
+Description:	This allows speakup to speak letters phoneticaly when arrowing through
+		a word letter by letter. This doesn't affect the spelling when typing
+		the characters. When cur_phonetic=1, speakup will speak characters
+		phoneticaly when arrowing over a letter. When cur_phonetic=0, speakup
+		will speak letters as normally.
+
 What:		/sys/accessibility/speakup/delimiters
 KernelVersion:	2.6
 Contact:	[email protected]

Documentation/ABI/testing/configfs-usb-gadget-uvc

@@ -197,7 +197,7 @@ Description:	Specific MJPEG format descriptors
 					read-only
 		bmaControls		this format's data for bmaControls in
 					the streaming header
-		bmInterfaceFlags	specifies interlace information,
+		bmInterlaceFlags	specifies interlace information,
 					read-only
 		bAspectRatioY		the X dimension of the picture aspect
 					ratio, read-only
@@ -253,7 +253,7 @@ Description:	Specific uncompressed format descriptors
 					read-only
 		bmaControls		this format's data for bmaControls in
 					the streaming header
-		bmInterfaceFlags	specifies interlace information,
+		bmInterlaceFlags	specifies interlace information,
 					read-only
 		bAspectRatioY		the X dimension of the picture aspect
 					ratio, read-only

Documentation/ABI/testing/debugfs-driver-habanalabs

@@ -91,6 +91,13 @@ Description:    Enables the root user to set the device to specific state.
                 Valid values are "disable", "enable", "suspend", "resume".
                 User can read this property to see the valid values
 
+What:           /sys/kernel/debug/habanalabs/hl<n>/device_release_watchdog_timeout
+Date:           Oct 2022
+KernelVersion:  6.2
+Contact:        [email protected]
+Description:    The watchdog timeout value in seconds for a device relese upon
+                certain error cases, after which the device is reset.
+
 What:           /sys/kernel/debug/habanalabs/hl<n>/dma_size
 Date:           Apr 2021
 KernelVersion:  5.13

Documentation/ABI/testing/sysfs-bus-coreboot

@@ -0,0 +1,45 @@
+What:		/sys/bus/coreboot
+Date:		August 2022
+Contact:	Jack Rosenthal <[email protected]>
+Description:
+		The coreboot bus provides a variety of virtual devices used to
+		access data structures created by the Coreboot BIOS.
+
+What:		/sys/bus/coreboot/devices/cbmem-<id>
+Date:		August 2022
+Contact:	Jack Rosenthal <[email protected]>
+Description:
+		CBMEM is a downwards-growing memory region created by Coreboot,
+		and contains tagged data structures to be shared with payloads
+		in the boot process and the OS.  Each CBMEM entry is given a
+		directory in /sys/bus/coreboot/devices based on its id.
+		A list of ids known to Coreboot can be found in the coreboot
+		source tree at
+		``src/commonlib/bsd/include/commonlib/bsd/cbmem_id.h``.
+
+What:		/sys/bus/coreboot/devices/cbmem-<id>/address
+Date:		August 2022
+Contact:	Jack Rosenthal <[email protected]>
+Description:
+		This is the pyhsical memory address that the CBMEM entry's data
+		begins at, in hexadecimal (e.g., ``0x76ffe000``).
+
+What:		/sys/bus/coreboot/devices/cbmem-<id>/size
+Date:		August 2022
+Contact:	Jack Rosenthal <[email protected]>
+Description:
+		This is the size of the CBMEM entry's data, in hexadecimal
+		(e.g., ``0x1234``).
+
+What:		/sys/bus/coreboot/devices/cbmem-<id>/mem
+Date:		August 2022
+Contact:	Jack Rosenthal <[email protected]>
+Description:
+		A file exposing read/write access to the entry's data.  Note
+		that this file does not support mmap(), as coreboot
+		does not guarantee that the data will be page-aligned.
+
+		The mode of this file is 0600.  While there shouldn't be
+		anything security-sensitive contained in CBMEM, read access
+		requires root privileges given this is exposing a small subset
+		of physical memory.

Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130

@@ -0,0 +1,46 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_filter_mode_available
+KernelVersion:  6.2
+Contact:	[email protected]
+Description:
+		Reading returns a list with the possible filter modes.
+
+		  * "sinc4"       - Sinc 4. Excellent noise performance. Long
+                    1st conversion time. No natural 50/60Hz rejection.
+
+		  * "sinc4+sinc1" - Sinc4 + averaging by 8. Low 1st conversion
+		    time.
+
+		  * "sinc3"	      - Sinc3. Moderate 1st conversion time.
+		    Good noise performance.
+
+		  * "sinc3+rej60" - Sinc3 + 60Hz rejection. At a sampling
+		    frequency of 50Hz, achieves simultaneous 50Hz and 60Hz
+		    rejection.
+
+		  * "sinc3+sinc1" - Sinc3 + averaging by 8. Low 1st conversion
+		    time. Best used with a sampling frequency of at least
+		    216.19Hz.
+
+		  * "sinc3+pf1"   - Sinc3 + Post Filter 1. 53dB rejection @
+		    50Hz, 58dB rejection @ 60Hz.
+
+		  * "sinc3+pf2"   - Sinc3 + Post Filter 2. 70dB rejection @
+		    50Hz, 70dB rejection @ 60Hz.
+
+		  * "sinc3+pf3"   - Sinc3 + Post Filter 3. 99dB rejection @
+		    50Hz, 103dB rejection @ 60Hz.
+
+		  * "sinc3+pf4"   - Sinc3 + Post Filter 4. 103dB rejection @
+		    50Hz, 109dB rejection @ 60Hz.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_filter_mode
+KernelVersion:  6.2
+Contact:	[email protected]
+Description:
+		Set the filter mode of the differential channel. When the filter
+		mode changes, the in_voltageY-voltageZ_sampling_frequency and
+		in_voltageY-voltageZ_sampling_frequency_available attributes
+		might also change to accommodate the new filter mode.
+		If the current sampling frequency is out of range for the new
+		filter mode, the sampling frequency will be changed to the
+		closest valid one.

Documentation/ABI/testing/sysfs-bus-iio-adc-max11410

@@ -0,0 +1,13 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_filterY_notch_en
+Date:		September 2022
+KernelVersion:  6.0
+Contact:	[email protected]
+Description:
+		Enable or disable a notch filter.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_filterY_notch_center
+Date:		September 2022
+KernelVersion:  6.0
+Contact:	[email protected]
+Description:
+		Center frequency of the notch filter in Hz.