update a bit for sweep 2

README.md

@@ -8,7 +8,7 @@ Sweep is a version of the more fabulous [Ferris](https://github.com/pierrecheval
 
 There's only choc version of Sweeps, unlike the Ferris, which offers many different versions for different switch types. 
 
-
+* Sweep2 - this superceeds the compact and possibly the compact ble, it is compact with power switches and puck support.
 * Sweep Compact - this is based on the Ferris compact.
 * Sweep Compact Low - this uses pg1232 or 'choc minis' rather than the standard choc v1 switch.
 * Sweep Compact BLE - basically the compact, with the trrs removed and reversable controller footprint.
@@ -18,15 +18,20 @@ There's only choc version of Sweeps, unlike the Ferris, which offers many differ
 
 The firmware can be found with the Ferris firmware as part of QMK. 
 
+Firmware for zmk and bluemicro_ble is called "Cradio".
+
+
+
 ## BOM
 
 To build a Sweep you will need:
 
-* 2x promicro compatible boards
-  * **Important:**  On the *left* half of the Sweep the promicro's USB port must face *towards* the PCB, and on the *right* half the USB port must face *away* from the PCB (so that the promicro's components are visible).
+* 2x promicro compatible boards or 2 nice!nanos.
+* Sweep 2 controllers face down, if you want to flip, match the raw pin to the controller. 
 * 34 choc switches
 * 2x reset switches (optional)
 * Some little rubber feet/bumpers
+* **Important:**  On the Sweep Compact *left* half of the Sweep the promicro's USB port must face *towards* the PCB, and on the *right* half the USB port must face *away* from the PCB (so that the promicro's components are visible).
 
 ## Who made this?